Ketjenflex® 12 by Axcentive is a plasticizer used in inks, coatings and plastisols. Compatible with NC, PVB, CAB, acrylic and PVC/vinyl, resins. Bio-based, safe phthalate replacement. Suitable for... view more

Borchi® Gel Thixo 2 by Borchers (Milliken) is a low shear/strongly pseudoplastic thickener for solvent-based lacquers and paints. It enhances the thixotropic character of paints with solvents of non-polar or weakly... view more

DiaFil® 525 by DKSH is mineral diatomite-based matting agent in paints. It is a low crystalline silica suitable for a wide range of applications. Being a natural mineral product, every deposit... view more

ROQUETTE AMIDON M-ST 310 distributed by DKSH provides adhesion, tack and low viscosity. It is a cold water soluble wheat starch. It is recommended for paints & coatings and is available in Asia/Pacific... view more

DAPRO® BIO 9910 by Elementis is a bio-based defoamer for universal water-based coatings. It is based on vegetable oil/wax components with a small amount of special silicone. It can be used as a... view more

LOPON® E 13 by ICL is a mineral oil & silicone-free defoamer. It is a cost-effective, low-VOC, highly efficient grade based on bio-renewable natural vegetable oil. It is designed for use in... view more

LOPON® E 81 by ICL is a mineral oil- & silicone-free defoamer. It is a cost-effective, low-VOC, very low settling, highly efficient grade which is based on bio-renewable natural rapeseed oil... view more

DENACOL® GEX-313 by Nagase ChemteX is a multi-functional, aliphatic-type epoxy crosslinking agent, based on glycerol polyglycidyl ether. It has low viscosity and high bio-based content. Its unique chemical... view more

DENACOL® GEX-521 by Nagase ChemteX is a multi-functional, aliphatic-type epoxy crosslinking agent. It is based on glycerol polyglycidyl ether and has high bio-based content. It offers good adhesion, high... view more

DENACOL® GEX-614B by Nagase ChemteX is an aliphatic-type epoxy crosslinking agent. It is multi-functional, based on glycerol polyglycidyl ether and has high bio-based content. Its unique chemical structure... view more

DENACOL® GEX-622 by Nagase ChemteX is an aliphatic-type epoxy crosslinking agent, based on glycerol polyglycidyl ether. It is multi-functional and has high viscosity & high bio-based content. Its unique... view more

Valida S231C by Sappi is a bio-based multifunctional stabilizer. It is designed to provide unique rheological and physical properties in water-borne coatings and inks. It has a high surface area... view more

Valida S231C, 3% by Sappi is a bio-based, biodegradable multifunctional stabilizer. It is a pre-hydrated, readily dispersible, fibrillated cellulose in water suspension. It is derived from wood pulp... view more

Techpolymer™ EFB-20X by Sekisui Kasei acts as an anti-blocking and matting agent. Suitable for waterborne formulations. It is a biodegradable polybutylene succinate polymer and contains 50% biomass... view more

Techpolymer™ EFC-208B by Sekisui Kasei can be used as a matting agent. Offers soft and smooth texture on coating surface. It is a crosslinked acrylic copolymer grade. It contains 50% biomass content... view more

Techpolymer™ EFC-215B by Sekisui Kasei can be used as a matting agent. Provides soft and smooth texture on coating surface. It is acrylic copolymer grade and contains 50% biomass content. Its mean... view more

ADDISP™ ECO by ADDAPT Chemicals is a multi functional, VOC and APEO-free, reactive pigment dispersant partially sourced from biomass. It is designed for resin-free pigment concentrates for solvent- &... view more

ESACOL® ED 18 by Lamberti is pseudoplastic, natural thickener for interior and exterior waterborne paints. It is a chemically modified polysaccharide derivative with delayed solubility. It offers good... view more

ESACOL® ED 50X by Lamberti is non-ionic, pseudoplastic, natural thickener. It is a chemically modified polysaccharide derivative with delayed solubility. It is chemically treated to provide lump-free... view more

ESACOL® ED MAX by Lamberti is a pseudoplastic, natural associative thickener. It is hydrophobically modified poly-galactomannan derivative with delayed solubility and characterized by a homogenous... view more

VISCOLAM® PS 170 AIR by Lamberti is a solvent-, APEO- and VOC-free, non-ionic polyurethane associative (HEUR)-based rheology modifier for waterbased resins system. It has high efficiency in increasing KU... view more

EPOXOL® CA118 by ACS Technical Products is an environment-friendly, VOC-free, non-yellowing & non-fugitive coalescent and plasticizer with a high bio-derived content. It is an excellent choice for renewable... view more

EPOXOL® EP185 by ACS Technical Products is a benzyl-modified functional epoxy diluent with high bio-based content. It is extremely hydrophobic and exhibits excellent compatibility with liquid epoxy resins. Suitable... view more

Alinco™ M25 1480 by ADM is a puffing agent suitable for house paints. It is a closed kettle, heat bodied linseed oil of medium acid range... view more

Alinco™ Q 1420 by ADM is a high viscosity puffing agent. It is a closed kettle, heat bodied linseed oil of medium acid range. It is used in house paint primers, varnishes, house paints, and printing... view more

Alinco™ X 1425 by ADM is a puffing agent. It is a closed kettle, heat bodied linseed oil of medium acid range. This product is used in house paints... view more

Alinco™ Y 1430 by ADM is a puffing agent. It is a closed kettle, heat bodied linseed oil of medium acid range. It is used in house paints... view more

Alinco™ Z 1435 by ADM is a puffing agent used in house paints. It is a closed kettle, heat bodied linseed oil of medium acid range... view more

RESIFA™ SOLESPHERE™ H-121 by AGC Chemicals Americas acts as a thickener and matting agent. It is a multi-porous, microspherical silica gel. It is produced from silicon dioxide, a natural and sustainable material. It is... view more

RESIFA™ SOLESPHERE™ H-122 by AGC Chemicals Americas acts as a thickener and matting agent. It is a multi-porous, microspherical silica gel. It is produced from silicon dioxide, a natural and sustainable material. It is... view more

RESIFA™ SOLESPHERE™ H-201 by AGC Chemicals Americas acts as a thickener and matting agent. It is a multi-porous, microspherical silica gel. It is produced from silicon dioxide, a natural and sustainable material. It is... view more

RESIFA™ SOLESPHERE™ H-31 by AGC Chemicals Americas is a multi-porous, microspherical silica gel and matting agent. It is used as a thickener for paints. It is produced from silicon dioxide, a natural and sustainable material... view more

RESIFA™ SOLESPHERE™ H-33 by AGC Chemicals Americas acts as a thickener and matting agent. It is a multi-porous, microspherical silica gel. It is produced from silicon dioxide, a natural and sustainable material. It is... view more

Fish oil and unsaturated hydrocarbon based copolymer resin. It is an irreversible wetting agent and therefore used as an adhesion promoter in anti-corrosive coatings. NECOMAR F 2080 is hydrophobic... view more

ZOLDINE™ MS-PLUS by Advancion (formerly ANGUS) is a 3-ethyl-2-methyl-2-(3-methylbutyl)-1,3-oxazolidine-based moisture scavenger. It eliminates bubbles and pinholes, alleviates downglossing and hazing, improves... view more

Hydrogenated castor oil. Acts as a thixotropic agent in the production of solvent-based coating systems. It consists mainly of the triglyceride of 12hydroxystearic acid. This is a saturated fatty... view more

CASTOR OIL USP by Alnor Oil Company acts as a lubricant. It is bio-based, triglyceride oil derived from the seed of the castor plant, genus Ricinus communis. It is used in ink application... view more

Castor Oil (Alnor) by Alnor Oil Company acts as a lubricant. It is bio-based, natural oil obtained from the seed of the Ricinus communis or castor plant. It is unique among naturally occurring oils in that it is... view more

Low Moisture Castor Oil by Alnor Oil Company acts as lubricant. It is bio-based, triglyceride oil obtained from the seed of the Ricinus Communis or castor plant. It has a slight characteristic odor. It is produced by... view more

Neutralized Castor Oil by Alnor Oil Company acts as a lubricant. It is bio-based, triglyceride oil obtained from the seed of the Ricinus Communis or castor plant. It has faint odor. It has been bleached to reduce the... view more

Pale Pressed Castor Oil by Alnor Oil Company acts as a lubricant. It is bio-based, natural oil obtained from the seed of the Ricinus Communis or castor plant. It has a very slight characteristic odor. It is obtained... view more

Biofene® by Amyris is a renewable, long-chain, branched hydrocarbon molecule called farnesene (trans-ß-farnesene). With its unique backbone and structure, Biofene® can provide superior qualities in... view more

KC2110 is hydrogenated castor oil. Used as a leveling agent. It improves the viscosity and surface tension as well as pigment dispersion in powder coatings. Recommended use level is 0.5-2.0%... view more

KC4050 by Anhui Kingcham Chemical Technology is composed of cellulose acetate butyrate. Acts as a texture agent. It is added to powder coatings to obtain various kinds of coating films. KC4050 is suitable for epoxy... view more

Oleris® Bio-Based n-Heptanoic acid by Arkema is a very effective corrosion inhibitor to protect copper, iron, aluminum and zinc when used as a salt derivative. It is a bio-based, seven-carbon linear chain saturated... view more

Dimethyl sebacate. It is a colorless, odorless, transparent oily liquid. Acts as a plasticizer, softening agent and solvent for cellulosic resin, synthetic resin and rubber. Exhibits high purity... view more

Drewplus™ AV1425 by Ashland is a polyols and fatty acid ester foam control agent for use in ready-to-use and dry-mix formulations. Effective for use in self-levelling compounds and water-proofing... view more

Drewplus™ L-1500 by Ashland is a polyols and fatty acid ester foam control agent for use in ready-to-use and dry-mix formulations. Effective for use in self-levelling compounds and water-proofing... view more

Acts as a defoamer. It prevents both macro foam and micro foam. Shows high stability of foam control agent during long-term storage. Provides improved leveling, high persistency and stability during... view more

Acts as a defoamer. It prevents both macro foam and micro foam. Shows high stability of foam control agent during long-term storage. Provides improved leveling, high persistency and stability during... view more

Drewplus™ T-2200 by Ashland is a polyols and fatty acid ester foam control agent for use in ready-to-use and dry-mix formulations. Effective for use in self-levelling compounds and water-proofing... view more

Alkyd resin. Atreplus T01 by Atcoat is a surface active material based on high quality fatty acid. It acts as a wetting agent, surfactant or as add-on for lubricants. Atreplus T01 exhibits minimum... view more

Atresal RV 300 is alkyd resin based on high quality fatty acid by Atcoat. Exhibits minimum volatile organic component with a high solid state/low solvent ratio. Atresal RV 300 allows the formulation... view more

Atresal RV 302 by Atcoat is alkyd resin based on high quality fatty acid. Exhibits minimum volatile organic component with a high solid state/low solvent ratio. Allows the formulation of paints with... view more

Atresal RV 305 by Atcoat is alkyd resin based on high quality fatty acid. Exhibits minimum volatile organic component with a high solid state/low solvent ratio. Allows the formulation of paints with... view more

Alkyd resin. Semipolymerginsäure C21 is a surface active material based on high quality fatty acid. It acts as a wetting agent, surfactant or as add-on for lubricants. Exhibits minimum volatile organic component... view more

ATUREX® 400CN by Aturex is a cashew nut shell liquid mannich base. Acts as a curing agent for epoxy resin based formulations. It has long pot-life, high reactivity, cures in cold, damp conditions... view more

ATUREX® 655CN by Aturex is a cashew nut shell liquid mannich base. Acts as a curing agent for epoxy resin based formulations. It has long pot-life, high reactivity, and cures in cold, damp... view more

Castor oil derivative. Acts as a thixotropic agent. It is significantly more thixotropic as compared to organoclays. It exhibits shear thinning that does not immediately rebuild upon removal of the... view more

BYK® -1745 by BYK is a VOC-free, silicone free, very effective, sustainable defoamer based on renewable vegetable derivatives that can replace finite raw materials such as mineral oils. It... view more

Carnauba wax dispersion. Derived from palm tree leaves. Provides enhanced scratch resistance. Offers improved metal marking resistance. Possesses improved surface slip and leveling properties. Used... view more

CERACOL® 604 by BYK acts as a scratch resistance agent. It is a carnauba wax dispersion derived from palm tree leaves. It provides enhanced scratch resistance. It offers improved surface slip... view more

Carnauba wax dispersion. Derived from palm tree leaves. Offers enhanced scratch resistance and improved surface slip. Used in solvent-borne can coatings. Approved by FDA under FDA § 175.105... view more

BM Waxamide E by Behn Meyer Group is a refined vegetable oil-based erucamide. Acts as a slip agent. It is recommended where higher heat stability, printability and sealability is requested... view more

BM Waxamide O by Behn Meyer Group is refined vegetable oil-based oleamide. Acts as a slip agent. Reduces CoF between the layers of the film and also between the film and other surfaces which are in... view more

BM Waxamide S by Behn Meyer Group is a refined vegetable oil-based stearamide. Acts as an anti-block agent. Improves mold release properties for injection molding processes. For extrusion of... view more

Dispelair® CF 54 by Blackburn Chemicals is a bio-based, VOC-free effective foam control agent and excellent defoamer for water-based coatings, paints and inks. It is made from 90% renewable sources... view more

Dispelair® CF 57 by Blackburn Chemicals is a bio-based foam control agent. It is an approx. 20% active emulsion of which >55% is from renewable sources. It is specifically formulated to be highly... view more

Dispelair® CF 902 by Blackburn Chemicals is an effective bio-based (vegetable oil) foam control agent designed for water-based coating, paints and inks. It is an excellent VOC-free defoamer and... view more

Jaylink® JL-106E by Bomar is a rheology modifier with low haze. It is based on acrylamidomethyl-substituted cellulose ester. It is suitable for formulating UV/EB coatings. It offers mild thixotropy... view more

Exilva F 01-L by Borregaard is a bio-based, 100% natural, pre-activated, odorless, multifunctional microfibrillated cellulose. Improves rheology and stability of water-based, high quality, smooth... view more

Exilva F 01-V is a 100% natural, pseudoplastic, bio-based, multifunctional microfibrillated cellulose by Borregaard. It is a non-toxic, anti-blocking, odorless, pre-activated, highly entangled... view more

GWAX150A by Braskem is a multi-purpose, bio-based linear polyethylene wax with reliable quality parameters. It is used in coating applications. GWAX150A has a shelf life of 3 years... view more

HE-70S by Braskem is a bio-based, oxygenated, partially renewable solvent made from sugarcane ethanol. It exhibits lower toxicity and greater solvency power compared to traditional hydrocarbon... view more

Hydrogenated castor oil based thixotropic additive. Imparts a strongly shear thinning flow behavior with excellent sag resistance, good flow, levelling and anti-settling properties. It is a finely... view more

Amide modified hydrogenated castor oil based thixotropic additive. Imparts a strongly shear thinning flow behavior with excellent sag resistance, good flow, levelling and anti-settling properties... view more

Modified phenalkamide. Acts as 90% solids epoxy curing agent in xylene. It has excellent rapid cure properties, even at low temperatures, and provides good adhesion on wet or otherwise unprepared... view more

Phenalkamine epoxy curing agent. Cardolite LITE 2002LP acts as a solvent and benzyl alcohol free, very low viscosity, light color agent suitable for solvent free epoxy coating applications. It... view more

Phenalkamine. Cardolite LITE 2010LV acts as a solvent-free epoxy curing agent suitable for high solids, low VOC coating applications. It exhibits excellent rapid cure properties, even at low... view more

Reactive diluent. Cardolite LITE 2513HP acts as a low viscosity, monofunctional epoxy reactive diluent designed for coatings and other epoxy applications. It exhibits long hydrophobic aliphatic side... view more

Phenalkamide. Cardolite LITE 3000 acts as a 70% solids, light color, low viscosity, epoxy curing agent suitable for high solids epoxy coating applications. It exhibits benefits of both polyamide and... view more

680 Blown Soybean Oil by Cargill is soybean oil (100%). It is an oxidized & polymerized, low odor, environment-friendly, cost-effective product. It exhibits slow drying and is an ideal component for... view more

Agri-pure™ AP-135 by Cargill is an industrial vegetable wax. It blends well with mineral and other wax types to optimize properties such as melting point, flexibility, viscosity and hardness. It provides... view more

Agri-pure™ AP-27 by Cargill is an industrial vegetable wax. It is a vegetable origin and bio-based grade. It blends well with mineral and other wax types to optimize properties such as melting point... view more

Agri-pure™ AP-635 by Cargill is an industrial vegetable wax. It blends well with mineral and other wax types to optimize properties such as melting point, flexibility, viscosity and hardness. It provides... view more

Agri-pure™ AP-635-45 by Cargill is an industrial vegetable wax. It blends well with mineral and other wax types to optimize properties such as melting point, flexibility, viscosity and hardness. It is a... view more

Dimethyl ketone or 2-propanone. It is the simplest saturated ketone and an important chemical intermediate as well as industrial solvent. It is produced through the anaerobic fermentation of corn or... view more

Butyl alcohol. Can be produced through the anaerobic fermentation of corn or biomass instead of traditional chemical processes from petroleum-based feedstock. Has no corrosive solvent. Used... view more

Elotex® ERA100 by Celanese is a modified natural rosin. Acts as an efflorescence reducing agent, water repellent and dispersing/wetting agent. Possesses excellent mixing, wetting properties and... view more

Sucrose acetate isobutyrate. SAIB acts as a plasticizer. It is a high purity carbohydrate. It is a sugar derivative produced by esterification of natural sugar with acetic and isobutyric anhydrides... view more

Starch polymer. Acts as a rheology modifier, structurant and binder. Is developed specifically to help coated paper and coated paperboard producers lower their manufacturing costs with no sacrifice... view more

Starch polymer. Acts as a rheology modifier, structurant and binder. Is developed specifically to help coated paper and coated paperboard producers lower their manufacturing costs with no sacrifice... view more

Starch polymer. Acts as a rheology modifier, structurant and binder. Is developed specifically to help coated paper and coated paperboard producers lower their manufacturing costs with no sacrifice... view more

Curran® CV5000 by Cellucomp is a cellulose fiber derived from root crops. It is based on novel fiber technology. It is green and multifunctional and can be used as a film enhancer. Provides up to... view more

Nanocrystalline cellulose (NCC). It is extracted from the wood fibers of Canada’s vast forests. It is a uniform, redispersible natural nanoparticle obtained from the crystalline regions of cellulose... view more

An environmentally-friendly cellulose fiber. Acts as a rheology modifier and filler. It is made from reclaimed paper products and replaces asbestos. It is gray in appearance and 0.53 mm in length... view more

An environmentally-friendly cellulose fiber. Acts as a rheology modifier. Offers green strength and adds texture. It is made from reclaimed paper products. It is gray in appearance and 1.31 mm in... view more

An environmentally-friendly cellulose fiber. Acts as a rheology modifier and filler. Also functions like asbestos. It is made from reclaimed paper products. It is gray in appearance and 0.83 mm in... view more

An environmentally-friendly cellulose fiber. Acts as a rheology modifier and filler. Also functions like asbestos. It is made from reclaimed paper products. It is gray in appearance and 0.87 mm in... view more

An environmentally-friendly cellulose fiber. Acts as a rheology modifier and filler. Also functions like asbestos. It is made from reclaimed paper products. It is gray in appearance and 0.72 mm in... view more

BioCeed 40 Plasticizer by Chemceed is non-phthalate plasticizer blend with a naturally-based component for use in inks and coatings. It is a more sustainable choice. It is an alternate for general... view more

Chempart SC 100 by Chemical Partners Industry is a polysaccharide resin. Used as a film former. It surrounds the dispersed water droplets impeding their attraction with each other, through steric... view more

Cyrene™ by Circa Group is a(1S,5R)-6,8-dioxabicyclo[3.2.1]octan-4-one. It is a chiral dipolar aprotic solvent. It has mild smoky ketonic odor. It is stable in presence of weak acids and weak bases... view more

Ceridust® 1041 TP VITA by Clariant is a micronized polar modified wax based on renewable resource. It shows excellent matting as well as slip and scratch resistance properties. Exhibits easy... view more

Ceridust® 1060 TP by Clariant is a micronized polar modified wax based on renewable resource. It offers effective matting, slip and scratch resistance properties in coating applications, smooth... view more

Ceridust® 1060 VITA by Clariant is a dispersing agent based on a bio-based, micronized polar modified wax. It also acts as a processing aid in powder coatings and provides excellent pigment... view more

Ceridust® 7820 TP by Clariant is a renewable polymer wax grade (it is a test product). Offers slip and very effective scratch/ mar resistance & degassing. Offers outstanding high gloss. Ceridust®... view more

Ceridust® 8090 TP by Clariant is a renewable polymer wax designed for wood coatings. It creates a smooth and soft touch surface like natural wood. With its addition, the coefficient of friction can... view more

Renewable aromatic multifunctional polyol. It acts as a flame resistance agent. Exhibits high viscosity, high reactivity and low exothermic nature. Provides formulation flexibility and improved... view more

EMULTROL CA-1 by Concentrol is a non-ionic/ anionic emulsified beeswax emulsion. Acts as a surface conditioner, anti-slip agent and anti-blocking agent. Exhibits good chemical and mechanical... view more

EMULTROL CM-2358 PT by Concentrol is a paraffin emulsion. Acts as a anti-blocking agent. Highly stabliized emulsion by means of cellulosic derivatives. Gives treated surfaces sliding, anti-blocking... view more

EMULTROL CV-1485 PL by Concentrol is a non-ionic carnauba wax emulsion (vegetable wax emulsified in water). Acts as an anti-adherent/anti-stick agent. The particle size of this product is less than... view more

EMULTROL CV-1485 TC by Concentrol is a non-ionic carnauba wax emulsion (vegetable wax emulsified in water). Acts as an anti-adherent/anti-stick agent. The particle size of this product is less than... view more

EMULTROL DFM AFO-3 by Concentrol is an emulsion of hydrophobic components in paraffin-based mineral oil. Acts as a defoamer. It is a non-ionic emulsion, free of alkylphenols and ethoxylates. It is a... view more

Cellulosic rheology modifier. Possesses shear thinning and high zero-shear viscosity. Reduces cracking, improves strength as well as scrub resistance. Offers sag control, settling control and VOC... view more

Cellulosic rheology modifier. Possesses shear thinning and high zero-shear viscosity. Reduces cracking, improves strength as well as scrub resistance. Offers sag control, settling control and VOC... view more

Betafib® MCF by Cosum Biobased Products is a 100% bio-based rheology modifier based on cellulose microfiber. Designed for water-based applications which require formulation stability & flow... view more

Bayhydur® eco 701-90 by Covestro is a low odor, bio-based hardner for waterborne systems. Offers high chemical resistance. It contains 61% biomass content. It can be easily dispersed in the aqueous... view more

Bayhydur® eco 7190 by Covestro is a bio-based hardener. Designed for two-component waterborne coatings. Offers high performance, improved carbon footprint and resistance to chemicals. It is suitable... view more

Desmodur® eco N 7300 by Covestro is an aliphatic, bio-based hardener component for light-fast polyurethane coating systems. Suitable for solvent-borne and solvent-free systems. Provides high resistance to... view more

Oxidatively polymerized castor oil. Acts as a plasticizer. It appears yellow viscous oil. It is biodegradable and has non drying as well as good oxidative stability... view more

Brij™ L23 by Croda is a natural alcohol ethoxylate grade without co-emulsifier. Acts as an emulsifier and dispersant. Available in Europe, North America and Asia. Brij™ L23 by Croda is suitable for... view more

Brij™ O2 by Croda is a polyoxyethylene-(2)- oleyl alcohol. Acts as a non-ionic surfactant, emulsifier and W/O co-emulsifier. It is a fatty ether produced from a naturally occurring straight chain... view more

ECO Brij™ C10 by Croda is a 100% bio-based, non-ionic, surfactant. It is produced from naturally occurring straight chain cetyl alcohol. It is also used as a versatile co-emulsifier for O/W... view more

ECO Brij™ C2 by Croda is a 100% bio-based, non-ionic surfactant. It is used as a versatile co-emulsifier for O/W emulsions wetting agent, dispersing agent and solubilizer. It is produced from... view more

Deogrip® Micro R 1510 by DOG Chemie is a hydrophobic, dipropylene glycol diacrylate grade based on a castor oil polymer. Acts as a matting agent and exhibits a soft feel effect which take place... view more

Deogrip® Micro R 1610 by DOG Chemie is a dipropylene glycol diacrylate grade based on a castor oil polymer. Acts as a matting agent and exhibits a soft feel effect which take place independently of... view more

Deogrip® WPF by DOG Chemie is a radically cross-linked, modified castor oil. Acts as a matting, soft touch and surface agent. Due to its viscoelastic properties, Deogrip® WPF offers shock-absorbing... view more

Deogrip® WPF-NT by DOG Chemie is a radically cross-linked, modified castor oil. Acts as a matting, soft touch and surface agent. Due to its viscoelastic properties, Deogrip® WPF-NT offers... view more

Mixture of terpene alcohols and hydrocarbons. Acts as a solvent. It is 100% bio based and extracted from pine trees... view more

Terpineol Normal by DRT is a multiconstituent substance comprising alpha-, beta and gamma terpineol. It is available in colorless to slightly yellow clear liquid with citrus, lime and floral lilac... view more

Terpineol ORB by DRT is a special blend of terpineol isomers. It is available in colorless to slightly yellow clear liquid. It is free from stabilizers. Terpineol ORB is used in special inks and... view more

Triglyceride of fatty acid. It acts as a plasticizer. Contains ricinoleic acid cis-12-hydroxyoctadec-9-enoic acid, a resource of an eighteen carbon hydroxylated fatty acid with one double bond... view more

Nitrogen derivatives of erucic acid. Acts as dispersing agent and lubricant. Erucamide has a high melting point and good stability at high temperature. Used in the making of high speed printing... view more

Turpentine. Acts as a solvent. It is anhydrous and free of impurities & suspended matter. Contains mainly a-pinene and ß-pinene. Complies with GB / T 12902:2 entry regulations... view more

Turpentine. Acts as a solvent. It is anhydrous and free of impurities & suspended matter. Contains mainly a-pinene and ß-pinene... view more

Turpentine. Acts as a solvent. It is anhydrous and free of impurities & suspended matter. Contains mainly a-pinene and ß-pinene. Complies with GB/T 12902:2 entry regulations... view more

DEUREX® B 66 A by Deurex is a benzoin. Acts as an antiblocking and processing agent. DEUREX® B 66 A is recommended for powder coatings... view more

DEUREX® D 6520 M by Deurex is an anti graffiti microsized diamond coated polymer. Acts as a rub resistance and scratch resistance agent. Offers good surface hardness. DEUREX® D 6520 M is recommended... view more

DEUREX® X 20 A by Deurex is a sugarcane based, good gloss amide wax. Acts as an antiblocking and degassing agent. Provides good weather resistance. DEUREX® X 20 A is recommended for powder coatings... view more

DEUREX® X 20 K by Deurex is a temperature stable ethylene-bis-stearamide wax (EBS) grade obtained from the sugar cane plant. Acts as an anti-blocking, dispersing agent, internal and external... view more

DEUREX® X 2010 M by Deurex is a quick drying, soft, sugarcane-based, micro sized ethylene bis- stearamide wax. Acts as a rub/ scratch resistance & slip agent, water repellent, anti-blocking agent... view more

Dibasic acid polyester. Acts as a plasticizer. It is a bio-based, low molecular weight, clear liquid (measured by MD 0 method). Exhibits outstanding permanence properties in vinyl compounds and... view more

Bio-based plasticizer. Is phthalate- and lead-free. Reduces the greenhouse gases by 40 percent versus traditional plasticizers. It demonstrates outstanding performance at low and high temperatures... view more

Bio-based plasticizer. Is phthalate- and lead-free. Reduces the greenhouse gases by 40 percent versus traditional plasticizers. It demonstrates outstanding performance at low and high temperatures... view more

Seed oil surfactant. ECOSURF™ SA-15 surfactant acts as a non-ionic, readily biodegradable additive with benefits of low odor, no gel range, superior wetting, excellent detergency, rapid dissolution... view more

Seed oil surfactant. ECOSURF™ SA-4 surfactant acts as a non-ionic, readily biodegradable (OECD 301) additive with benefits of no gel range, superior wetting, excellent detergency, rapid dissolution... view more

Seed oil surfactant. ECOSURF™ SA-7 by Dow acts as a non-ionic, readily biodegradable (OECD 301) surfactant additive with benefits of no gel range, superior wetting, excellent detergency, rapid... view more