Nalzin® FA 179 by Elementis is a corrosion inhibitor for aqueous paint systems to counteract the formation of flash-rust. It is also suitable for application as an inhibitor against the formation of... view more

RHEOLATE® 2000 by Elementis is a highly efficient, VOC-free, pourable liquid anti-settling rheology modifier for water-borne systems including water-reducible alkyd, acrylic, epoxy and urethane resin... view more

RHEOLATE® FX 1070 by Elementis is an associative thickening agent for aqueous coatings. It increases the high-shear viscosity, resulting in more Newtonian behavior. It improves weatherability, film build... view more

THIXATROL® SR by Elementis is a low-molecular-weight polyester amide. Acts as a non-seeding, highly efficient, liquid, organic rheological additive for aromatic and some oxygenated solvent-based... view more

Dapro® 7007 by Elementis is a non yellowing, non-toxic special dryer for waterborne coatings. It prevents loss of dry on aging and increases resistance to yellowing of air-dry alkyd finishes exposed... view more

Is a special dryer for waterborne coatings. It is a version of a chelating catalyst designed to replace cobalt driers where cobalt causes undesirable side effects. It can be use din waterborne... view more

DAPRO® DF 209 by Elementis is a blend of silicone derivatives and hydrophobic silica in mineral oil. Acts as a defoamer. It is an opaque off-white liquid. Suitable for high quality decorative and... view more

Dapro® DF 408 by Elementis is a blend of hydrophobic foam destroying solids in polyglycol. Acts as a defoamer. It is an opaque off-white liquid. Particularly effective in pigmented acrylate... view more

Modified polysiloxane acts as a bubble releasing and anti-foaming agent for variety of solvent-borne coatings. Prevents the foaming of solvent based systems caused by mechanical forces such as... view more

DAPRO® DF 60 by Elementis is a blend of glycols and organo modified polydimethylsiloxanes. Acts as a defoamer. It is an off-white liquid that is very efficient in destabilizing both macro and micro... view more

DAPRO® DF 603 by Elementis is a blend of cyclohexanone and a proprietary modified silicone. Acts as a defoamer. It is a water insoluble, non-explosive, clear iquid with ketone odor. Available in... view more

DAPRO® DF 690 by Elementis is a blend of glycols and organo modified polydimethylsiloxanes. Acts as a defoamer. It is a non-explosive, opaque off-white liquid with a slight odor. Very efficient in... view more

Is a silicone free liquid defoamer for use in waterborne systems. It has outstanding emulsifying properties in water. The product is specially recommended for systems that are sensitive to surface... view more

Dapro® DFC-19 by Elementis is an organic/reacted silica. Acts as a defoamer/anti-foaming agent. Can cause gloss reduction. It is silicon-free. Compatible with vinyl/acrylic, 100% acrylic... view more

Dapro® DFC-60 by Elementis is a blend of glycols and organo modified polydimethylsiloxanes. Acts as a defoamer. It is very efficient in destabilizing both macro and micro foam. It has a very good... view more

Nuocure® Co 10% by Elementis is a cobalt ions based drier. Used for aqueous alkyd systems. Contains special dispersing agents. Nuocure® Co 10% provides very good drying properties and very good stability... view more

Nuvis® BEZ 75 by Elementis can be used to fight settling and sagging in most non-aqueous coatings as oxidativily drying alkyd, alkyd-melamine, acrylic, nitro-cellulose, chlorinated rubber and epoxy... view more

Nuvis® FX 1010 by Elementis is a polyurethane thickener. Offers improved weathering, flow and levelling characteristics. Shows excellent spatter resistance and increases film thickness. Nuvis® FX 1010 is... view more

Nuvis® FX 1035 by Elementis is a polyurethane thickener. Provides long-term viscosity stability. Exhibits improved flow and levelling characteristics. Nuvis® FX 1035 is used as the sole thickener in all... view more

Nuvis® FX 1050 by Elementis is a polyurethane thickener. Offers improved weathering, flow and levelling characteristics. Possesses higher film build, opacity and non-plastic flow. Nuvis® FX 1050 is used in... view more