Omnipol BP distributed by DKSH is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly... view more

Masil® Ultra SL 1000 by DyStar is a zero VOC, low viscosity, easy to handle, water-based silicone emulsion. It is specially formulated to impart slip, scratch and mar resistance. It effectively reduces the... view more

Hydropalat® WE 3486 (Old Name: Hydropalat® 886) by BASF is a modified dioctyl sulfosuccinate wetting agent, partly based on renewables, for high-gloss overprint varnishes. It offers enhanced substrate... view more

Polyether modified polydimethylsiloxane. Acts as a silicone based surface additive for radiation curable systems. Offers improved substrate wetting, and leveling at low dosages. Provides good... view more

Solution of a multi-acrylic functional, modified polydimethylsiloxane. Even at a low dosage BYK-UV 3505 displays a strong reduction in surface tension and improves substrate wetting, even of... view more

Oxalic acid and vanadium salt in aqueous solution. Acts as a water-soluble primary drier, saturant and drying stabilizer. Provides fast drying of the film surface which remains constant even after... view more

Diethylene glycol monohexyl ether. Acts as a slow evaporating solvent. Provides good flow and leveling. Offers greater solubility with water. Promotes uniform diffusion, eliminates solvent-pop and... view more

Surfynol® AS 5120 by Evonik is a wetting agent and defoamer. It offers dynamic wetting without generating excess foam over the most difficult surfaces including silicone release liners. It does not... view more

Esacure KTO 46 by IGM Resins acts as a photoinitiator. It is a stable mixture of trimethylbenzoyldiphenylphosphine oxide, a-hydroxy ketones and benzophenone derivatives. It is particularly indicated for... view more

Omnipol 2702 by IGM Resins is di-functional polymeric benzophenone derivative type II photoinitiator. It exhibits extremely low odor, low migration and good reactivity in comparison to other polymeric... view more

Omnirad 991 by IGM Resins is a type II photoinitiator that can be easily used in corporation with classic amine synergists or amine acrylates. It is used in clear systems like OPV and industrial... view more

Omnivadd XF 3722 by IGM Resins is a silicone-free slip and leveling agent for aqueous and non-aqueous systems. It is designed to reduce the surface tension of various resin systems at substrate interface... view more

SpeedCure TPO-L by Lambson (Sartomer) is a yellow colored ethyl (2,4,6-trimethylbenzoyl) phenyl phosphinate. Acts as an extremely efficient liquid Type I photoinitiator absorbing at 380 nm... view more

Dispersion of finely micronized PTFE wax. Has been formulated to be used in aqueous systems where excellent heat resistance, gloss and slip are required. Used in water based flexographic, gravure... view more

Silair® C104 by Siliconi is an APEO-free, non-ionic silicone antifoam agent and defoamer. It is a VOC-free and odorless grade and is designed to control and eliminate foam in aqueous systems... view more

Silair® C400 by Siliconi is an APEO-free, non-ionic silicone antifoam agent and defoamer. It is a VOC-free and odorless grade and is designed to control and eliminate foam in aqueous systems... view more

Mergal® K12 by Troy Corporation is a formaldehyde-free, blend of 5-chloro-N-methylisothiazolinone, N-methylisothiazolinone and 2-bromo-nitropropan-1,3-diol. Mergal® K12 is recommended for... view more