Dapro® FX 2060 by Elementis is an effective polyamide activator for bentonite and hectorite based organoclay pregels which increases the sag resistance and reduces pigment settling of non-aqueous... view more

NUOSPERSE® FA 196 by Elementis is an anionic, highly concentrated liquid pigment dispersing agent for carbon black and organic pigment. It is suitable for thermoplastic acrylic systems and as an auxiliary... view more

NUOSPERSE® FX 605 by Elementis is sodium salt of a polymeric carboxylic acid-based low-foaming pigment dispersing agent for aqueous systems. Counter-acts pigment flocculation in weak acid, neutral and... view more

RHEOLATE® 2000 by Elementis is a highly efficient, VOC-free, pourable liquid anti-settling rheology modifier for water-borne systems including water-reducible alkyd, acrylic, epoxy and urethane resin... view more

RHEOLATE® 2001 by Elementis is a fine particle size high efficiency pourable liquid anti-settling agent for use in water-reducible coating and ink systems. It is used in systems having pH higher than... view more

Carbowet® 13-40 by Evonik is a VOC- and APE- free alternative to 30-40 mole ethoxylate surfactants. It is a cost-effective, low-odor and low-viscosity liquid. It provides substrate wetting, pigment... view more

Non-ionic surfactant. It acts as a low-foaming, solvent-free and alkyl phenol ethoxylate-free additive for pigment and substrate wetting. It exhibits excellent surface tension reduction... view more

Surfynol® DF-70 by Evonik is an organic-based defoamer designed specifically for water-based formulations. It is used in coatings, flexographic flexible packaging and gravure publication ink... view more

SURFYNOL® DF-75 by Evonik is a mineral oil-free, non-silicone defoamer. It provides knockdown and sustained defoaming in a wide variety of water-based formulations. It is designed for pigment... view more

Surfynol® OP-340 by Evonik is a surfactant, wetting agent as well as defoamer. It is designed to be compatible and to perform well with the various acrylic resins commercially utilized in aqueous... view more

Esacure 1001 M by IGM Resins is a type II photoinitiator. It is based on difunctional ketosulphone class. It is suitable for LED cure, through and surface cure.It is used to initiate radical... view more

Omnirad 2022 (Former Irgacure 2022) by IGM Resins is a highly efficient liquid curing agent that is used to initiate radical polymerization of unsaturated resins after exposure to UV light. It acts as... view more

Omnirad 369 (Former Irgacure 369) by IGM Resins is a highly efficient UV-curing agent used to initiate the photo-polymerization of chemically unsaturated prepolymers like acrylates-in combination with... view more

Omnirad 380 by IGM Resins is a versatile photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It can be used in combination with... view more