RHEOLOGY MODIFIER TRM-203 by DKSH is a low viscosity, APEO-free, low odor, synthetic hydrophobically modified alkali swellable anionic associative emulsion thickener (HASE). It offers base-activated, high... view more

Antarol™ FJ 601 by DyStar is a general-purpose defoamer. It is suitable for all types of waterborne architectural coatings based on acrylic polymers & copolymers and polyvinyl acetate... view more

Antarol™ TS 711 by DyStar is a general-purpose defoamer. It exhibits outstanding persistent antifoam performance. It shows good compatibility and rapid foam knockdown. It is dispersed & incorporated... view more

Foam Blast® 327 by DyStar is a highly efficient, 100% active, synthetic polyol-based foam control agent. It has hydrophobes that minimize and eliminate many unwanted side effects associated with... view more

Foam Blast® 338 by DyStar is a cost effective, synthetic polyol-based, non-silicone, non-mineral oil, 100% active defoamer. It is recommended for waterborne polymer systems in inks and industrial... view more

Foam Blast® 349 by DyStar is a 100% active, highly dispersible, silicone- & mineral oil-free defoamer. It is a proprietary blend of organic components. It is highly effective at relatively low use... view more

RHEOLATE® 135 by Elementis is an APE-free, newtonian HASE thickener for latex paints and WB systems. It demonstrates both chain entanglement and associative thickening mechanisms with an excellent... view more

RHEOLATE® HX 6050 by Elementis is a non-ionic, easy-to-use, highly efficient, synthetic associative thickener. It is a high-shear (ICI) builder for low and zero-VOC latex paints. It offers an excellent... view more

RHEOLATE® HX 6050 IF by Elementis is a non-ionic, biocide-free, easy-to-use, highly efficient, synthetic associative thickener. It is a high-shear (ICI) builder for low and zero-VOC latex paints. It offers an... view more

HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for protection of... view more

ADDITOL® BCPK by allnex is a radical photoinitiator blend of ADDITOL® BP and ADDITOL® CPK that can be used alone or in combination with other photoinitiators and amine co-activators. It is used in... view more

ADDITOL® XW 330 by allnex is a wetting and dispersing agent suitable for both inorganic pigments and extenders in aqueous systems where it can be used to stabilize emulsion paints. It is aqueous... view more

ADDITOL® XW 372 N by allnex is a high-efficiency defoamer for waterborne dispersions, interior and exterior emulsion paints. It is compatible with vinyl acetate and vinyl esters of carboxylic acids... view more

BRB Siloen® DA 293 by BRB International BV is an easy to incorporate, silicone-based antifoam emulsion. This defoamer shows high efficiency at very low addition level. Its efficient foam control... view more

BRB Siloen® LA 271 is a flow and leveling agent by BRB International BV. It is glycol-modified silicone fluid suitable for water- & solvent-borne and radiation curing systems with good substrate... view more

ADDAPT® BioWet™ PC by ADDAPT Chemicals is a non-VOC/SVOC polymeric coalescing agent. It is used as a processing aid in waterborne systems to improve film-forming properties by lowering the MFFT. It... view more

Afcona -2502 by Afcona Additives is a modified polysiloxane with fine silica. Acts as a defoamer. It has a very high resistance to shear forces and temperature. Afcona -2502 is used in high and low PVC emulsion... view more

Advantage™ AV1425 by Ashland is a high-efficiency, environmentally friendly, APEO-free and zero VOC vegetable oil-based antifoaming agent. Used in architectural paints, emulsions plasters, industrial... view more

Aquaflow™ NHS-300 by Ashland is a hydrophobically modified polyether. Acts as non-ionic associative thickener. It is cost effective, pH insensitive and biostable. Possesses superior flow, leveling as... view more