Low cost, readily biodegradable branched trialkyl phosphate ester. Used as antifoaming agent in inks and paints. Offers enhanced thermal and hydrolytic stability... view more

Preparation of methane dyestuff. Used for inks... view more

Sulphonated triphenylmethane dyestuff. Used for industrial ink-Jet inks... view more

Uniplex 82 is a light-fast citric acid ester acetyl triethyl citrate (ATEC). Acts as a plasticizer. It is compatible with a large number of polymers such as cellulosics [like cellulose acetate... view more

Solution of 1, 2-Benzisothiazolin-3-one (19%) in dipropylene glycol & water. Acts as biocide (algicide & fungicide). It controls wide range of organisms at cost-effective concentrations. It has... view more

SpeedCure 500 by Lambson (Sartomer) is a eutectic liquid mixture of 1-hydroxycyclohexyl phenyl ketone (45.0-55.0% Speedcure 84) and benzophenone (45.0 – 55.0% Speedcure BP) (type one and a type two... view more

SpeedCure 73 by Lambson (Sartomer) is a 2-hydroxy-2-methyl-1-phenylpropanone. Acts as a highly efficient, widely used, Type I photoinitiator. Radicals are formed by an a cleavage mechanism and as... view more

SpeedCure 976 by Lambson (Sartomer) is a diphenyl[2-(phenylsulfanyl)phenyl]sulfonium hexafluoroantimonate in propylene carbonate. Acts as a cationic photoinitiator. Cures cycloaliphatic epoxy resins... view more

SpeedCure 976D by Lambson (Sartomer) is a transparent, pale yellow colored mixture of triarylsulphonium hexafluoroantimonate salt in a reactive solvent. Acts as a cationic photoinitiator. Cures... view more

SpeedCure BEDB by Lambson (Sartomer) is a 2-butoxyethyl-4-(dimethylamino) benzoate. Acts as a liquid amine synergist. Exhibits good solubilizing properties, low toxicity, low odor and ability to... view more

Kemectant EB3 is an NPE-free proprietary blend. Acts as a humectant and viscosity depressant (rheology modifier). Provides an extended open time, improves freeze-thaw stability and prevents in-can... view more

Lansperse DS200W is an APE-free, NPE-free and VOC-free polyaryl ethoxylate. Acts as a dispersing agent. Provides steric stabilization to prevent re-agglomeration. It is a hazy pale-straw colored... view more

Lansperse DS80 is an anionic, APE-free, NPE-free and VOC-free surfactant blend. Acts as a dispersing- and wetting agent. Provides electrostatic and steric stabilization to prevent re-agglomeration... view more

Lansperse SUV is an NPE-free surfactant blend. Acts as a dispersing agent. It is specifically designed to operate in non-aqueous medium. It is hydrophobic in nature but soluble in a wide range of... view more

Flexonic™ 37 A by Lawter is a non-ionic, high density polyethylene wax emulsion. Offers improved slip, rub resistance, hardness and/or block resistance. Used in paper coatings, wood coatings, metal... view more

Flexonic™ 4104 A by Lawter is an aqueous PTFE dispersion. Exhibits high mar-, abrasion and high temperature resistance. Used in aqueous flexographic and gravure inks. Flexonic™ 4104 A has been formulated for... view more

Flexonic™ 600 by Lawter is polyethylene/microcrystalline wax dispersion. Offers high degree of gloss, transparency, slip, mar, scratch and wet rub resistance. Has low foaming and very good... view more

Flexonic™ 902 A by Lawter is a water-based polyethylene/ paraffin wax dispersion. Exhibits controlled slip, high gloss, high degree of mar-, scratch and wet rub resistance. Provides low foaming... view more

An aqueous sulfo polyester resin dispersion. Imparts adhesion, high gloss, low odor, fast drying speed, transparency, rub and scuff resistance. Used in water-based gravure and flexo inks, primers as... view more

3,4-Epoxycyclohexylmethyl(3,4-epoxy)cyclohexane. It is an epoxy resin and appears as a pale yellow transparent liquid. It is used in used in coating, UV inks etc... view more

Epilox® P 22-00 by Leuna Harze is a low molecular weight, cycloaliphatic epoxy resin. Acts as a binder for epoxy resin coatings and varnishes. It is a low viscosity alternative to standard... view more

Anionic wetting agent. It is colorless or pale yellow transparent liquid. Has satisfactory penetrability... view more

POLITY A-530 by Lion Corporation is a sodium polycarboxylate grade (active ingredient=40%). Acts as a dispersant (surfactant-like) and viscosity reducer. It is pale yellow or pale red liquid... view more

POLITY A-540 by Lion Corporation is an anionic grade. Acts as a dispersant and wetting agent. It is a pale yellow liquid with satisfactory dispersing property. Suitable for paints, pigments and inks... view more

POLITY A-550 by Lion Corporation is a copolymer of acrylate and maleate (active ingredient=37%). Acts as a dispersant (surfactant-like) and viscosity reducer. It is pale yellow liquid... view more

Carbocure™ 7000 by Lubrizol is a low viscous, liquid matting agent designed for radiation curable coatings. Exhibits improved water beading capabilities, stable viscosity and excellent tactile... view more

Carboset® GA-7451 by Lubrizol is a self-crosslinking acrylic copolymer supplied in water. It dries to a clear, water-resistant and hard thermosetting film. It exhibits excellent adhesion, fast... view more

Rheologically controlled styrene acrylic copolymer emulsion. Possesses high gloss, nearly newtonian viscosity, excellent transfer and resolubility. Has good adhesion on aluminium and metallized... view more

Carbosperse™ K-XP228 by Lubrizol is a partially neutralized, water soluble carboxy-functional copolymer. It is designed for use as a pigment and particle dispersant. It offers high pigment loading... view more

Doresco® CS 7501 by Lubrizol is a release modified acrylic copolymer. It is a versatile lacquer-based in ethyl acetate which gives an excellent base in formulating heptane-free cold seal release... view more

IDRAREP L56/8 by Lydra is a ready to use, water-repellent oil for solvent-based stones. It does not alter the aesthetics and breathability of the materials. IDRAREP L56/8 is recommended for varnishes &... view more

Ethylene glycol solvent, colorless, odorless liquid. Shows higher boiling point and lower volatility. Used when high purity is required, in inkjet inks... view more

Ethylene glycol solvent, colorless, odorless liquid. Shows higher boiling point and lower volatility. Used as the main solvent constituent in aromatic solvent extraction, in inkjet inks... view more

Ethacryl® P20 by LyondellBasell is a dispersant suitable for coatings, printing inks and inkjet inks. Ethacryl® P20 offers high pigment loading, very good dispersion stability, low viscosity dispersions/Inks... view more

Ethacryl® P40 is a dispersing agent. Used for coatings, printing inks and inkjet inks. Offers high pigment loading, very good dispersion stability, low viscosity dispersions/Inks, piezo and thermal... view more

Ethacryl® P60 is a dispersing agent. Offers high pigment loading, very good dispersion stability, low viscosity dispersions/Inks, piezo and thermal printheads, high jetting reliability, proven ink... view more

ADP 0010 50 by MPD Industries is an adhesion promoter with low solid content. It is used in flexographic- and gravure inks. ADP 0010 50 has an alcoholic odor... view more

ADP 0075 50 by MPD industries is an adhesion promoter. It is recommended for flexographic- and gravure inks. ADP 0075 50 has an alcoholic odor... view more

ADP 0100 45 by MPD Industries is an adhesion promoter. It is used in flexographic- and gravure inks. ADP 0100 45 has an alcoholic odor... view more

ADP 0200 75 by MPD industries is an adhesion promoter. It is used in flexographic- and gravure inks. ADP 0200 75 has an alcoholic odor... view more

MARCOA™ G2930 by Macroocean is a polyester resin with branched structure in DBE 150 solution. Exhibits hiding power, high glass transition temperature and pigment dispersion. Suitable for a variety... view more

MARCOA™ G7730 by Macroocean is a polyester resin in DBE 150 solution. Exhibits pigment dispersion, glass adhesion and chemical resistance. Suitable for a variety of ketones, esters, ethers and... view more

MARCOA™ G9830 by Macroocean is a polyester resin in BCS 150 solution. Exhibits glass adhesion and pigment dispersion. Offers resistance to yellowing and water. Suitable for a variety of ketones... view more

NOVOC™ WP250-60 by Macroocean is an environment friendly, water-based, polyester resin with amine neutralization. It is diluted in butyl cellosolve solvent. Exhibits hardness, gloss, reduced VOC... view more

NOVOC™ WS114-30 by Macroocean is an environment friendly, water-based, soft, anionic polyester resin. Exhibits reduced VOC emissions, excellent flexibility, durability and water resistance. Shows... view more

HEXAFOR™ 678 by Maflon is ethoxylated non-ionic fluorsurfactant. It can be used as an emulsifying agent. It reduces orange peel effect and surface tension at very low concentrations. It is based on... view more

Water-solvent soluble, ethoxylated non-ionic fluorosurfactant. Effectively reduces surface tension at very low concentrations. Is stable in both acidic and basic conditions, making it perfect for... view more

Lithium carboxylate anionic fluorosurfactant solution. Reduces surface tension at very low concentrations for water based systems. Provides exceptional wetting, levelling, reduced orange peel... view more

Ecroflow® AV 25 by Mallard Creek Polymers is an APEO-free thickener. It is an acrylic / methacrylic acid ester-copolymer water-based emulsion which is either anionic or non-ionic in nature. Shows... view more

Bis (1-octyloxy-2, 2, 6, 6-tetramethyl-4-piperidyl) sebacate. Acts as a hindered amine light stabilizer (HALS). It extends the lifetime of coatings by preventing the cracking and loss of gloss... view more

Liquid Hindered Amine Light Stabilizer (HALS). Provides very good light stability to variety of coating systems, including waterborne and UV curable coatings, and long term stability to a variety of... view more

Liquid Hindered Amine Light Stabilizer (HALS). Provides very good light stability to variety of coating systems, including waterborne and UV curable coatings, and long term stability to a variety of... view more

Highly efficient, non-yellowing, 2-hydroxy-2-methyl-1-phenyl-1-propanone. Used in floor tile, exterior and coil coating, printing inks and clear coatings for wood, plastic, paper, metal, and optical... view more

Low viscosity, liquid mixture of two photoinitiators. Efficient photoinitiator used to initiate the photopolymerization of unsaturated prepolymers in combination with monomers for use in clear... view more

Michem® Emulsion 67235 by Michelman is a non-ionic, phenol-free high density polyethylene emulsion. Provides abrasion resistance, improved slip, scratch resistance, rub resistance, hardness and/or... view more

Michem® Emulsion 71152 by Michelman is an anionic scale wax emulsion. Acts as a water repellent agent. This white opaque, semi-viscous liquid provides water beading, water repellence and... view more

Michem® Emulsion 91240G by Michelman is a non-ionic polyethylene emulsion. Acts as a water repellent agent. This white opaque, semi-viscous liquid provides excellent block-, rub-, scratch- and mar... view more

Michem® Emulsion 91735 by Michelman is a anionic/non-ionic maleated polypropylene emulsion. Imparts durability and mar-, slip- & block resistance. Michem® Emulsion 91735 is used in coatings for... view more

Michem® Emulsion 91840 by Michelman is a non-ionic emulsion blend of high-density polyethylene and paraffin waxes. Provides good block-, slip- and mar resistance properties. Offers gloss enhancement and rub... view more

AquaBead® 425E by Micro Powders is a large particle size anionic carnauba wax emulsion. It provides water beading effect as well as weather-, block- and mar resistance. Imparts soil release... view more

Microspersion® 1213 UVW by Micro Powders is an anionic dispersion of modified polypropylene wax, densified with silica. It is a convenient, ready-to-use, pourable anionic acrylic-stabilized wax... view more

Microspersion® 1406 by Micro Powders is an aqueous non-ionic sub-micron PTFE dispersion. Provides enhanced lubricity, gloss retention, abrasion resistance, and temperature resistance. Its higher... view more

Microspersion® 19 by Micro Powders is a convenient, ready-to-use, synergistic blend of waxes including polyethylene, PTFE and amide. It is an anionic water-based pourable acrylic-stabilized wax... view more

Microspersion® 190-50 by Micro Powders is a non-ionic water-based dispersion of a unique, high-performance composite of low-density polyethylene and PTFE wax. It is convenient, ready-to-use... view more

Xanthene. It is a pink dye. It has high purity and low salt content. Suitable for aqueous fiber tip & fiber line pens, highlighter markers and roller ball applications... view more

Xanthene. It is a red dye. It has high purity and low salt content. Suitable for aqueous fiber tip & fiber line pens, highlighter markers and roller ball applications... view more

Azo. It is a golden yellow dye. It has high purity and low salt content. Suitable for aqueous fiber tip & fiber line pens, highlighter markers and roller ball applications... view more

Azine black dye. It has high purity and low salt content. Suitable for aqueous fiber tip & fiber line pens, highlighter markers and roller ball applications... view more

Azine. It is a black dye. It has low chlorides & sulphates and is tested to meet specifications for filterability, pH & color consistency. Suitable for aqueous fiber tip and fiber line pens... view more

Polyaziridine Crosslinker AN-2201 by Millstone Durbax acts as a crosslinking agent for both aqueous & non-aqueous systems. It is especially suitable for acrylic emulsions and urethane dispersions... view more

Polyaziridine Crosslinker MY-0104 by Millstone Durbax acts as a crosslinking agent for both aqueous & non-aqueous systems, especially suitable for acrylic emulsions and urethane dispersions. Used in... view more

TAKELAC™ W-5030 by Mitsui Chemicals is polycarbonate-based PUD resin. Exhibits softness, flexibility and elasticity and good adhesion. Possesses good compatibility with various resins. Has good... view more

TAKELAC™ W-5661 by Mitsui Chemicals is polycarbonate-based PUD resin. Exhibits softness, flexibility and elasticity and good adhesion. Possesses good compatibility with various resins. Has good... view more

CoatOSil™ 2816 by Momentive Performance Materials is a blend of polyethylene oxide (EO), polypropylene oxide (PO) and polydimethylsiloxane (PDMS). Acts as mar resistance and slip agent. It has a linear methyl end-capped ABA... view more

Blend of vegetable oils, alkoxylated compounds and hydrophobic silica in emulsion form. Acts as a defoamer. Possesses excellent stability and defoaming persistency. Used in architectural coatings... view more

Emulsion of modified fatty, hydrophobic silica, alkoxylated compounds, polysiloxane copolymer and emulsifiers. Used in architectural coatings, industrial and wood coatings, printing inks. Offers... view more

AGITAN® 150 by Munzing is an aqueous emulsion of polysiloxane copolymer with hydrophobic silica. Used in industrial and wood coatings, printing inks. Offers very good stability and defoaming... view more

Aqueous emulsion of polysiloxane copolymer with hydrophobic silica. Used in industrial and wood coatings, printing inks. Offers very good stability and defoaming persistency... view more

Blend of vegetable oils and alkoxylated compounds, silica and emulsifiers, nonionic. Used in architectural coatings, industrial and wood coatings and printing inks. Offers very good stability and... view more