ADDITOL® BCPK by allnex is a radical photoinitiator blend of ADDITOL® BP and ADDITOL® CPK that can be used alone or in combination with other photoinitiators and amine co-activators. It is used in... view more

ADDITOL® HDMAP by allnex is a general purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials... view more

ADDITOL® MBF by allnex is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated... view more

EBECRYL® 140 by allnex is ditrimethylolpropane tetraacrylate, a reactive diluent. It exhibits good cure response, light color and low irritancy. It is compatible with a wide range of acrylated... view more

EBECRYL® 160 by allnex is a reactive diluent used in ultraviolet light (UV) and electron beam (EB) energy-curable coatings & inks. It is a trifunctional diluting oligomer that polymerizes when... view more

BRB Siloen® LA 271 is a flow and leveling agent by BRB International BV. It is glycol-modified silicone fluid suitable for water- & solvent-borne and radiation curing systems with good substrate... view more

ADDAPT® PolySurF™ ACE by ADDAPT Chemicals is a solvent-free polymerizable additive. It is an acrylic acid adduct of the epoxy ester of versatic acid. It acts as a wetting agent or surfactant for use... view more

ADDAPT® PolySurF™ HPH by ADDAPT Chemicals is a solvent-free UV-curable additive. It can act as a polymerizable hydrophilic non-ionic surfactant and/or co-polymerizable plasticizer. It is a mixture... view more

ADDAPT® PolySurF™ HPL by ADDAPT Chemicals is a solvent-free, UV-curable additive for paints, lacquers and printing inks. It acts as a polymerizable lipophilic non-ionic surfactant, a flame retardant... view more

Mixture of methacrylated mono-and di-phosphate ester. A solvent free UV-curable additive for paints, lacquers and printing inks. Acts as a co-polymerisable plasticizer, defoamer, adhesion promoter... view more

Proprietary mixture of acrylated mono-and di-phosphate ester. Used in paints, lacquers and printing inks. Offers very good wetting and levelling properties... view more

Special organically modified polysiloxane for slip, defoaming and improvement of surface characteristics. No intercoat adhesion problems even without sanding. Due to the special modification, it... view more

2,2-Diethoxyacetophenone. Used as a high-boiling point, effective photoinitiator for UV-curable acrylate-based coatings, and inks. Offers non-yellowing properties. Provides good shelf stability and... view more

2-Hydroxy-2-methyl-1-phenyl-1-propane-one. Used as a clear, high boiling point, effective photoinitiator for UV-curable acrylate-based coatings, and inks. Offers non-yellowing properties, good shelf... view more

Darocur® 4265 by BASF is a highly efficient liquid curing agent, alpha-hydroxyketone. Offers good solubility in common UV reactive systems including systems based on acrylates or unsaturated... view more

DISPERBYK® -168 by BYK is an aromatic-free wetting and dispersing additive for solvent-borne and solvent-free radiation-curable coatings and printing inks. It is a solution of higher molecular... view more

Chivacure® 100 by Chitec Technology is a photoinitiator based on polyfunctional, oligomeric alpha-hydroxyketone. It is suitable for extra-thin coatings where oxygen inhibition is severe. Exhibits high... view more

Chivacure® 70 by Chitec Technology is an oligomeric, polyfunctional alpha-hydroxyketone photoinitiator. It exhibits high reactivity, non-yellowing and non-migration properties. It is compatible with most... view more