Esacure 1187 distributed by DKSH acts as a cationic photoinitiator. It is modified sulphonium salt hexafluorophosphate diluted in 25% propylene carbonate, It does not release any benzene upon... view more

Omnipol BP distributed by DKSH is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly... view more

Tego® Glide 410 distributed by DKSH is a flow/ leveling and slip additive for water-borne, radiation-curing and solvent-borne formulations. Used in wood and furniture coatings, industrial coatings... view more

Tego® Rad 2100 distributed by DKSH is a short siloxane backbone/long organic modification, highly cross-linkable radiation-curing additive. It is recommended when solubility and compatibility are... view more

Foam Blast® 20F by DyStar is zero-VOC, 100% active silicone compound designed to provide maximum foam control in UV and EB-cured inks, overprint varnishes and coating systems. It is suitable for... view more

Foam Blast® 5 by DyStar is a zero-VOC, 100% active silicone compound designed to provide maximum foam control for industrial systems. It does not separate, even after long period of time which... view more

Foam Blast® 550 by DyStar is 100% active, non-polar, synthetic polyol-based, specialized non-silicone foam control agent. It is suitable for UV/EB-cured overprint varnishes, inks, industrial coatings... view more

EBECRYL® LED 03 by allnex is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. When it is combined with an appropriate... view more

ADDITOL® BCPK by allnex is a radical photoinitiator blend of ADDITOL® BP and ADDITOL® CPK that can be used alone or in combination with other photoinitiators and amine co-activators. It is used in... view more

ADDITOL® HDMAP by allnex is a general purpose radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials... view more

ADDITOL® LED 01 by allnex is mercapto-modified polyester acrylate resin. It is added as co-resin to UV curable formulations, in order to transform them into UV LED curable systems. It is used to... view more

ADDITOL® MBF by allnex is a radical photoinitiator exhibiting very good surface cure. It can be used alone or in combination with other photoinitiators in formulations containing unsaturated... view more