Borchi® Gen 1459 by Borchers is a solution of a high molecular weight polycarboxylic acid polymer and a polysiloxane copolymer in xylene. Acts as a wetting- and dispersing agent. It shortens the... view more

Borchi® Gen DFN by Borchers (Milliken) is a non-ionic, VOC- and APEO-free wetting and dispersing agent. It is recommended for organic pigments and carbon black in water- and solvent-based coating systems. It... view more

Borchi® Gen PB 60 by Borchers acts a specially designed wetting and dispersing agent for inorganic thixotropic additives. It offers short dispersion and activation times as well as excellent binder... view more

Borchi® Gol 1376 by Borchers is a phenylmethyl polysiloxane. Acts as a flow and levelling agent. Contains 100% active. It improves the film appearance of coatings caused by surface defects such as... view more

Polysiloxane. It acts as a slip enhancing, flow promoting, and leveling agent. Helps in low foam stabilization. Offers reduced surface tension which leads to an even film formation. Increase in... view more

Cyclohexane by Braskem is a high purity, cyclic aliphatic hydrocarbon solvent. It is used in paint formulations. Cyclohexane has a shelf life of 2 years... view more

Dicyclopentadiene by Braskem is a monomer obtained through the C5 stream. It offers excellent combination of stiffness & strength, a wide temperature range of application, high-quality surface finish and... view more

Isoprene (Braskem) by Braskem is a high purity hydrocarbon resin. It is mainly used in ink... view more

Piperylene by Braskem is a mixture of C5 compounds. It is used as a raw material to produce hydrocarbon resins with applications in paint and ink... view more

Avicor® 7305 is a versatile, APE-free vinyl acrylic copolymer (54-56%) emulsion. It is a fine particle sized emulsion with freeze-thaw stability at low glycol levels. Exhibits excellent stain... view more

Maleic acid Di (2-ethylhexyl) Ester (DOM) by Celanese is a dioctyl maleate diester. It is a clear, virtually colorless liquid with an ester-like odor. Exhibits low glass transition temperature... view more

Maleic Acid Dibutyl Ester (DBM) by Celanese is a dibutyl maleate diester. It is a colorless liquid with a characteristic ester-like odor. Exhibits low glass transition temperature and minimum film... view more

Chiguard® 5350 by Chitec Technology acts as UV absorber. It is a cost-effective, economical solution for long-term weathering-resistant coatings. It is a mixture of UVA and HALS. It provides excellent UV... view more

Chiguard® 5400 by Chitec Technology is a hydroxyphenyl triazine-based UV absorber designed for high performance coatings. Offers extra long-term weather resistance, low volatility, high thermal stability and... view more

Chiguard® 5453 by Chitec Technology is a liquid mixture of ultraviolet absorbers (UVA) and hindered amine light stabilizers (HALS). It is generally used in automotive coatings... view more

Chiguard® U-9310 by Chitec Technology is a liquid functional UV stabilizer. It offers thermal stability and photostability to TPU during processing and in the end-uses. Chiguard® U-9310 is recommended for PU- and epoxy... view more

Chivacure® 1190 by Chitec Technology is a liquid photoinitiator based on sulphonium chemistry. It is used to induce the polymerization of epoxides and other cation polymerizable materials upon exposure to UV... view more

Coadis™ 123 K by Coatex (Arkema Group) is a potassium salt of a polycarboxylic polymer. It is an APEO-free, synthetic, hydrophobic dispersing agent with good on aging stability. It contributes to improved water &... view more

Coadis™ 144 A is a low viscosity polyacrylate ammonium salt by Coatex (Arkema Group). Acts as a hydrophilic dispersing agent designed for water-borne, solvent-free exterior and interior coating... view more

Coapur™ 975 W by Coatex (Arkema Group) is a water soluble non-ionic polyurethane. It is a solvent-, alkyl phenol ethoxylates (APEO)-, tin- and heavy metal free associative polyurethane thickener and... view more

RHEOTECH™ 2800 by Coatex (Arkema Group) is a low VOC, APE-free associative acrylic thickener. It combines the benefits of a HASE with flow and leveling behavior of a HEUR. Provides a unique... view more

RHEOTECH™ 3800 by Coatex (Arkema Group) is an APE-free, solvent-free aqueous dispersion of an acrylic copolymer. It is an associative, tin-free acrylic thickener designed to improve both the... view more

Acrylic latex. Provides very good UV resistance and resistance to hydrolysis. Improves flexural and tensile properties. Offers very good shear bond adhesion. Used as a general purpose binder for a... view more

An acrylic copolymer emulsion. Possesses glossy, tough and durable. Offers good water, chemical and abrasion resistance. Provides good plasticizer resistance. Exhibits good wetting and adhesion to... view more

NeoCryl® A-1052 by Covestro is a modified styrene acrylic copolymer. It is designed for printing ink applications. It exhibits good pigment wetting & solvent tolerance as well as good water- &... view more

NeoCryl® A-1091 by Covestro is a non-film forming, modified styrene copolymer dispersion. It offers gloss, scratch resistance and high transparency. It also provides anti-blocking, hardness, heat... view more

NeoCryl® A-1092 by Covestro is a film-forming, modified styrene acrylic copolymer dispersion. It provides printability, grease- & water resistance, hardness, clarity and adhesion to various... view more

LoVOCoat™ Sol 500 by Croda is a polymeric non-ionic surfactant water-in-oil emulsifier designed for the incorporation of a fraction of water into solvent-borne coatings for VOC. It offers cost... view more

Maxemul™ 9107 by Croda is a versatile polymeric non-ionic surfactant-based emulsifier for O/W epoxy emulsions, bringing excellent tropical storage stability and no negative effects on dry film... view more

Multiwet™ BD by Croda is a non-ionic surfactant-based wetting agent. It provides excellent wetting capabilities on clean, unprepared and low energy substrates. It is a water-soluble, low foaming... view more

Multiwet™ EF by Croda is the most efficient non-ionic surfactant-based wetting agent. It provides excellent wetting capabilities on clean, unprepared and low energy substrates. It is a... view more

Multiwet™ SO by Croda is a zero-VOC, APE-free, anionic surfactant-based solid wetting agent. It provides improved wetting capabilities on clean, unprepared and low energy substrates. It has a low... view more

DALPAD™ C by Dow is a low odor, efficient coalescing agent. This tripropylene glycol n-butyl ether is the slowest-evaporating member of the family of DOWANOL™ glycol ethers. It is used in... view more

DOWSIL™ RSN-0806 Resin by Dow is a silanol-functional silicone resin. It is stable and shows high temperature performance. It can be used alone or blended with DOWSIL™ RSN-0805 Resin to enhance... view more

Polycarbodiimide-modified diphenylmethane diisocyanate. Used in coatings. Possesses low viscosity and good storage stability down to 24°C. Offers very good flexibility. Aids stabilization of polymer... view more

Modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with glycol. Possesses medium-viscosity. Provides more rapid compatibility between isocyanates and polyols, which... view more

Medium volatility isobutyl acetate. Acts as a colorless, non-HAP solvent for coatings applications. Offers high volatility and low intrinsic viscosity. Provides blush resistance. Possesses good... view more

Eastman Advantis™ 510W by Eastman is a chlorine-free, APEO-free, waterborne adhesion promoter. Provides excellent adhesion on non-flame treated EPDM rubber-modified polypropylene substrates. Used for adhesion... view more

Solusolv™ 2075 is a low odor, aliphatic triethyleneglycol bis (2-ethyl hexanoate) by Eastman Company. Acts as a coalescing agent. Enables VOC reduction through replacement of traditional coalescents... view more

2-Ethylhexyl benzoate (100% concentration). It acts as a coalescent. Offers low odor, LVP (low vapor pressure)-VOC (volatile organic compounds), no HAP (hazardous air pollutants) and no yellowing... view more

Dapro® 7054 by Elementis is an auxiliary additive. It acts accelerating the isocyanate-hydroxyl reaction in 2K polyurethane coatings, air drying alkyd paints and inks. It also acts accelerating the... view more

Dapro® BEZ 75 by Elementis acts as an auxiliary agent to fight settling and sagging. It is a clear, water-soluble liquid. It improves sag resistance in dipping varnishes, spray paints and in varnishes... view more

Dapro® DF 108 by Elementis is a blend of hydrophobic silica in mineral oil-based defoamer. It is a VOC-free opaque off-white liquid. It imparts excellent foam control in decorative paints and coatings... view more

Dapro® DF 109 by Elementis acts as a defoamer. It is a blend of hydrophobic silica and silicone in mineral oil. It provides rapid bubble break at low concentrations. It imparts good foam control in... view more

Dapro® DF 1492 by Elementis is a silicone-free foam suppressor can be used to prevent foam formation during mixing and provides rapid bubble-breaking in applied wet films modified polyol foam contains... view more

BLUESIL™ ADD 10086 by Elkem Silicones is a polydimethylsiloxane gum in solvent solution. It is especially developed to obtain hammer effects in combination with thixotropic polyurethane bases. It is... view more

BLUESIL™ ADD 11013 by Elkem Silicones is a polyether-modified polydimethylsiloxane. Acts as a wetting agent, antifoaming agent, mar and scratch resistance agent. Improves their flow and leveling... view more

BLUESIL™ BP 9800 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, BLUESIL™ BP 9800 enables the formulation of... view more

BLUESIL™ BP 9821 by Elkem Silicones is an aqueous APE-free polymethylsiloxane resin emulsion. Combined with acrylic or styrene-acrylic dispersions, it enables the formulation of coatings with high... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more