Drewplus™ T-3202 by Ashland is a polyols and fatty acid ester foam control agent for use in ready-to-use and dry-mix formulations. Effective for use in self-levelling compounds and water-proofing... view more

Drewplus™ T-4201 is an oil-based foam control agent by Ashland Specialty Chemical. Drewplus™ T-4201 is designed for wood and parquet lacquers, automotive basecoats and gravure inks... view more

Drewplus™ T-4202 by Ashland Specialty Chemical is a foam control agent based on oil. Drewplus™ T-4202 is used in wood & parquet lacquers and gravure inks... view more

Drewplus™ T-4263 by Ashland is a polyols and fatty acid ester foam control agent for use in ready-to-use and dry-mix formulations. Effective for use in self-levelling compounds and water-proofing... view more

Drewplus™ T-4303 by Ashland is a polyols and fatty acid ester foam control agent for use in ready-to-use and dry-mix formulations. Effective for use in self-levelling compounds and water-proofing... view more

Dehydran® 1208 by BASF acts as a defoamer in coatings, based on polyester, polyacrylates, polyurethane and epoxy resins including solvent-free, waterborne and solventborne coatings. It is blend of... view more

Dehydran® 1293 G by BASF is a solution of special modified polysiloxane. It acts as a defoamer and deaerating agent in purely aqueous coatings containing cosolvents based on polymer emulsions... view more

Dehydran® 1861 by BASF is a mixture of natural and synthetic fat derivatives, free from mineral oil and silicone oil. It acts as a defoamer in emulsion paints. It offers very good compatibility... view more

Dehydran® 2293 by BASF is a modified polydimethylsiloxane solution in a VOC free carrier. Used as a defoamer and deairing agent in aqueous architectural paints, industrial and wood coatings... view more

Dehydran® 3185 by BASF is a solution of a modified polysiloxane. It offers long-term efficiency and outstanding properties. Dehydran® 3185 is used as a defoamer and air release agent for aqueous... view more

Akasil® ADP 300 by BRB International BV is a low viscosity silicone anti-foaming agent. It is highly effective at low concentrations and has been developed specifically for non-aqueous systems... view more

Akasil® Antifoam 3107 by BRB International BV is an aromatic solvent-based anti-foaming agent for chemical and petrochemical processes. Suitable for defoaming applications in refinery operations... view more

Akasil® Antifoam TG10 by BRB International BV is a non-ionic silicone emulsion. Suitable for general purpose technical applications. Akasil® Antifoam TG10 is designed for coatings for pulp and paper... view more

Akasil® Antifoam TG20 is a non-ionic silicone emulsion by BRB International BV. Suitable for general purpose technical applications. Designed for solvent- and water-based fluorosilicone systems... view more

BRB Siloen® DA 291 by BRB International BV is a solvent-free, waterborne, UV resistant, high performance defoamer and deaerator. It is based on polyether siloxane technology and hydrophobic solids. It reduces risk of... view more

Mixture of hydrophobic solids and foam destroying polymers. Acts as a silicone-free polymeric defoamer for aqueous systems (conventional and UV). Especially suitable as defoamer for aqueous... view more

Silicone- and mineral-oil free polymeric defoamer for aqueous systems. Prevents foam during production and application. Shows optimum efficiency at low dosage. Offers resistance to acid and alkaline... view more

BYK® -014 by BYK is a mixture of foam-destroying polymers and hydrophobic solids. It is a VOC-free (< 1500 ppm), mineral oil free and silicone-free polymer-based defoamer. Shows optimum performance... view more

Silicone-free mixture of foam-destroying polymers and hydrophobic solids. Offers good defoaming, especially in pigmented water-borne systems. Increases the popping limit of the coating. No settling... view more

Very effective silicone- and mineral oil free, polymeric defoamer for aqueous systems. Exhibits no negative influence on the printing behavior. Does not cause any defects in the typography. Used in... view more

HY-037 by Beijing Mayor Chemical Technology is non-corrosive & non-toxic polyether grade. It acts as a defoamer with strong inhibition of foam. It provides good chemical and storage stability. It... view more

HY-038 by Beijing Mayor Chemical Technology is mineral oil fatty acid. It exhibits good transparency and does not have effect on luster. It provides good antifoaming performance and very good... view more

HY-1040A by Beijing Mayor Chemical Technology acts as a defoaming agent. This grade is composed of mineral oil, emulsifier and modified ether. It possesses excellent heat resistance performance and... view more

HY-1040C by Beijing Mayor Chemical Technology is a low cost defoamer which exhibits excellent defoaming & suppression effect. It can be well dispersed in emulsion, latex and water-based coatings. It... view more

HY-1040D by Beijing Mayor Chemical Technology acts as a defoamer. It is composed of mineral oil, modified polyether and emulsifiers. It possesses excellent defoaming & suppression effect, good water... view more

Dispelair® CF 11 by Blackburn Chemicals is a foam control agent and excellent defoamer for solvent-based, 2K and solvent-free floor coatings. It eliminates air upon application and is particularly... view more

Dispelair® CF 145 by Blackburn Chemicals is a foam control agent and excellent defoamer for water-based paints. It shows good compatibility and high dispersibility in water. It is effective over a... view more

Dispelair® CF 22 by Blackburn Chemicals is an effective foam control agent and excellent defoamer for solvent-based, 2K and solvent-free coatings. It eliminates air upon application and is... view more

Dispelair® CF 246 by Blackburn Chemicals is a foam control agent and excellent defoamer for water-based coatings. It is used very successfully in low to high PVC systems and decorative emulsion... view more

Dispelair® CF 317 by Blackburn Chemicals is an effective foam control agent. It is specifically designed to work in a wide range of aqueous and solvent-based systems. It is used very successfully to... view more

Borchi® A-111 EU by Borchers (Milliken) is the most effective general-purpose silicone-free defoamer and air release agent for unsaturated polyester and vinyl ester-based composites. It is suitable for... view more

Defoamer based on tri-n-butyl phosphate. Used for emulsion paints and paper coatings... view more

Borchers® AF 0550 by Borchers is a mineral oil. Acts as a silicone-free defoamer/anti-foaming agent. Characterized by good efficiency with less impact on surface integrity. Increases density and... view more

Borchers® AF 0871 by Borchers is a modified organo polysiloxane emulsion. Acts as a silicone-based defoamer/anti-foaming agent. Improves surface characteristics such as leveling, scratch resistance... view more