Ascinin® Anti Skin 0445 by Borchers (Milliken) is a phenol- and MEKO-free anti-skinning agent for oxidatively cured coating systems. It improves the storage stability. It controls surface dry retardation and keeps the... view more

Borchi® Gen AP by Borchers (Milliken) is a non-ionic, APEO-free wetting and dispersing agent. It improves pigment wetting of inorganic pigments and fillers. It is suitable for inorganic pigment press-cakes and... view more

DeuAdd MA-95 distributed by DKSH is an amine neutralizer designed to adjust and stabilize pH of water-borne systems. Also functions as a co-dispersant to prevent re-agglomeration of pigments. It... view more

Esacure KIP 75 LT distributed by DKSH acts as a photoinitiator. It is a liquid mixture of Esacure KIP 150 (75%) and tripropyleneglycoldiacrylate (25%). It is an oligomeric polyfunctional... view more

RHEOLATE® 244 by DKSH is 25% solids dispersion of polyether urea polyurethane-based associative rheology modifier. It is designed for use in waterborne paints and inks containing small... view more

Polyurethane solution in water. Acts as an efficient low-shear non-ionic synthetic associative thickener (NiSAT) with reduced viscosity loss upon tinting. It is a next generation color viscosity... view more

Polyurethane solution in water. Acts as an efficient high-shear non-ionic synthetic associative thickener (NiSAT). It is designed as a Newtonian high shear (ICI) builder. Shows an excellent balance... view more

Dapro® DF 21 by Elementis is a VOC-free, water dispersible defoamer. It is a blend of hydrophobic silica, emulsifiers and mineral oil. It offers excellent foam suppression and application... view more

Dapro® DF 696 by Elementis is a highly efficient grind defoamer. It is an optimized blend of foam destroying particles, modified silicone and polypropylene glycol. It provides optimum foam control in... view more

NUOSPERSE® FX 631 by Elementis is a general purpose, sodium salt of a hydrophobic copolymer-based pigment dispersant. It offers ease of use, superior color properties and storage stability. It exhibits... view more

NUOSPERSE® FX 665 by Elementis is an ammonium salt of a hydrophobic copolymer-based pigment dispersant. It provides outstanding water resistance, corrosion resistance, excellent wet adhesion and early... view more

RHEOLATE® HX 6008 by Elementis is an easy-to-use, highly efficient, non-ionic, synthetic associative thickener (NiSAT) for high shear-rate viscosity built-in water-borne systems. This pourable & pumpable... view more

ADDITOL® BCPK by allnex is a radical photoinitiator blend of ADDITOL® BP and ADDITOL® CPK that can be used alone or in combination with other photoinitiators and amine co-activators. It is used in... view more

ADDITOL® dry CF103 by allnex is cobalt- & solvent-free, primary drier based on accelerated manganese. It possesses low VOC, reduced odor and high flash point. It is a ready to use product with... view more

CYMEL® 303 LF by allnex is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly... view more

VISCOPOL™ 9250 by allnex is an APEO-free, high performance acrylic aqueous dispersion. It offers fast drying, excellent pigment wetting, solvent tolerance, excellent water-, grease- and good block... view more

Zephrym™ PD 4913 by Croda is a non-ionic polymeric dispersant for organic and inorganic pigment particles in waterborne coatings and inks. It is well suited for untreated particle surfaces. It... view more

Zephrym™ PD 4974 by Croda is an anionic, low VOC dispersant for inorganic and carbon particles in waterborne coatings and inks. It is specifically recommended for stable dispersions of iron oxide... view more