Luna-pal K80 distributed by DKSH offers improved gloss, adhesion, pigment wetting, film hardness and solid content and reduced overall viscosity. It is a colorless, transparent, neutral... view more

RHEOLATE® 244 by DKSH is 25% solids dispersion of polyether urea polyurethane-based associative rheology modifier. It is designed for use in waterborne paints and inks containing small... view more

Polyurethane solution in water. Acts as an efficient high-shear non-ionic synthetic associative thickener (NiSAT). It is designed as a Newtonian high shear (ICI) builder. Shows an excellent balance... view more

RHEOLATE® 125 by Elementis is a cost-effective rheological additive with high thickening efficiency in the low to medium-shear-rate range. It is an alkali swellable emulsion based on an acrylic... view more

RHEOLATE® 135 by Elementis is an APE-free, newtonian HASE thickener for latex paints and WB systems. It demonstrates both chain entanglement and associative thickening mechanisms with an excellent... view more

RHEOLATE® 208 by Elementis is 100% solids, polyether urea polyurethane-based associative rheology modifier. It is designed for use in paints containing small-particle size latex emulsions and in... view more

RHEOLATE® HX 6010 IF by Elementis is an efficient high-shear non-ionic synthetic associative thickener (NiSAT). It is designed as a Newtonian high shear (ICI) builder. It shows an excellent balance of sag and... view more

ADDITOL® XW 6585 by allnex is an easy to incorporate, anti foam/air release modified silicone-based defoamer. It is VOC-free (EU 2004/42/EG), mineral-, emulsifier & APEO-free with no influence on... view more

EBECRYL® 140 by allnex is ditrimethylolpropane tetraacrylate, a reactive diluent. It exhibits good cure response, light color and low irritancy. It is compatible with a wide range of acrylated... view more

EBECRYL® 160 by allnex is a reactive diluent used in ultraviolet light (UV) and electron beam (EB) energy-curable coatings & inks. It is a trifunctional diluting oligomer that polymerizes when... view more

EBECRYL® 160 BC by is a reactive diluent. It is a trifunctional diluting oligomer that polymerizes when exposed to sources of free radicals. It possesses low viscosity, low irritancy, light... view more

Esacure 1001 M by IGM Resins is a type II photoinitiator. It is based on difunctional ketosulphone class. It is suitable for LED cure, through and surface cure.It is used to initiate radical... view more

Omnirad 127 (Former Irgacure 127) by IGM Resins is a highly efficient type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates-in... view more