Organically modified castor oil derivative. Acts as a rheological addtive for use in aliphatic and aromatic solvent-based coatings. Increases viscosity and provides thixotropy. Contributes to... view more

ADDITOL® XW 6585 by allnex is an easy to incorporate, anti foam/air release modified silicone-based defoamer. It is VOC-free (EU 2004/42/EG), mineral-, emulsifier & APEO-free with no influence on... view more

Omnivadd ED 2190 by IGM Resins acts as a defoamer in various water-based coating as well as in water-based ink systems. It is used in flexographic, printing inks, gravure and over print varnishes. It is... view more

Omnivadd WD 2720 by IGM Resins is a silicone-free anti-foam agent that supports the quick de-aeration of thermosetting resin systems so that foam and blister-free self levelling compounds and laminates can... view more

Omnivadd XF 3722 by IGM Resins is a silicone-free slip and leveling agent for aqueous and non-aqueous systems. It is designed to reduce the surface tension of various resin systems at substrate interface... view more

Modified polyethylene wax. Improves scratch and metal mark resistance. Possesses homogeneous particle size distribution. Reduces coefficient of friction. Offers gloss control for a matte or satin... view more

Micronized polypropylene-modified polyethylene wax. Enhances scratch resistance. Provides very good antiblocking properties. Improves metal mark resistance. Increases resistance to scuffing. Offers... view more

Micronized, PTFE-modified polyethylene wax. Provides very good surface smoothness through combination of pure PTFE and hard polyethylene wax. Offers high scratch resistance and hardness. It gives... view more

Micronized, PTFE-modified polyethylene wax. Offers very good surface smoothness. Provides high scratch resistance and hardness. Possesses good metal marking-, abrasion- and mar resistance. Reduces... view more

Micronized, PTFE-modified polyethylene wax. Offers very good slip through lowering of coefficient of friction. Provides good scratch and abrasion resistance, due to hardness of wax combination... view more

Monoethyleneglycol ethyl ether acetate. Acts as a coalescing agent, evaporation retarder and active solvent. It results from the reaction of the ethyl ether derived from monoethylene glycol (ethyl... view more

Monoethyleneglycol butyl ether acetate. Acts as a coalescing agent as well as active solvent or evaporation retardant. It is obtained from the reaction of the butyl ether derived from monoethylene... view more

PAT-ADD AF 62 by Patcham FZC is silicone free polymer solution. Acts as a de-airing agent and defoamer. In clear varnishes, the product may cause some in-can haziness. However, typically the... view more

PAT-ADD AF 70 by Patcham FZC is polysiloxane and organic polymer compound in hydrocarbon solvent. Acts as a defoamer and de-aerator. Has outperforming de-aeration properties in EP floorings and... view more

PAT-ADD AF 72 by Patcham FZC is polysiloxane in diiso butyl ketone (DIBK). It is clear liquid de-aerator and defoamer. Provides best balance between defoaming properties and compatibility. It is... view more

PAT-ADD LE1433(EP) by Patcham (FZC) is fluorocarbon modified polyester. Acts as a flow, wetting and levelling agent. It contributes to appealing film performances and DOI. It maintains recoat ability and... view more

PAT-ADD LE1477 by PATCHAM FZC is fluorocarbon modified polyacrylate. Acts as a flow, wetting and levelling agent. It contributes to optimal film appearance. It maintains recoat ability and provides... view more