Densified hydrophobic fumed silica. Used paints and coatings, printing inks. Offers water resistance, hydrophobising of liquid systems. Provides improvement in hydrophobicity and rheology of offset... view more

AEROSIL® R 974 by Evonik is a hydrophobic fumed silica. It is used in paints and coatings, coating polymers. It offers water resistance and hydrophobisation of liquid systems. It provides improvement... view more

POLYVEST® 110 by Evonik is a non-functionalized, hydrophobic, liquid polybutadiene grade. It is a stereospecific, low viscosity, unsaponifiable product with a high content of 1, 4-cis double bonds... view more

Polybutadiene. It is a stereospecific, low viscous and unsaponifiable liquid with a high content of 1,4-cis double bonds. Exhibits high chemical-, water- and cold-resistance. Provides high... view more

POLYVEST® eCO 110 Bio by Evonik is a stereospecific, low viscous and unsaponifiable polybutadiene with high content of 1,4-cis double bonds. It has been shown to reduce the use of fossil raw... view more

POLYVEST® eCO 130 Bio by Evonik is a stereospecific, low viscous and unsaponifiable polybutadiene with high content of 1,4-cis double bonds. It has been shown to reduce the use of fossil raw... view more

SIPERNAT® 320 DS by Evonik is a finely ground silicon dioxide. Used for offset inks. Exhibits good thickening and excellent flow improving properties. SIPERNAT® 320 DS is registered with REACH... view more

SIPERNAT® FPS-5 by Evonik is a silicon dioxide. Acts as a rheology modifier, matting and anti-blocking agent. Used for water-based offset printing inks. SIPERNAT® FPS-5 is registered with EINECS... view more

Surfynol® AS 5120 by Evonik is a wetting agent and defoamer. It offers dynamic wetting without generating excess foam over the most difficult surfaces including silicone release liners. It does not... view more

Surfynol® OP-340 by Evonik is a surfactant, wetting agent as well as defoamer. It is designed to be compatible and to perform well with the various acrylic resins commercially utilized in aqueous... view more

TEGO® Glide A 115 by Evonik is a flow/leveling and slip additive. It prevents patchy matting, pigment flooding, flotation and surface irregularities in solvent-borne formulations through the controlled... view more

Tego® Rad 2600 by Evonik acts as a cross-linkable release agent for radiation-curing formulations. Imparts good slip & defoaming effect and substrate wetting. Used in (litho) offset printing inks... view more

Silicone acrylate. Used as a release additive for radiation-curing formulations in offset printing inks, silk screen inks and overprint varnishes. Offers improved scratch resistance and marker... view more

Tego® Rad 2700 by Evonik acts as a release/ anti-blocking agent. Designed for radiation-curing formulations in (litho) offset printing inks, silk screen inks radiation-curing printing inks and... view more

TEGO® Variplus AP by Evonik is ketone-aldehyde condensation resin. Acts as a co-binder, a hard resin solution for solvent-borne, solvent-free and radiation-curing formulations. It provides viscosity... view more