ADDITOL® DMMTA by allnex is a radical photoinitiator that can be used alone or in combination with other photo-initiators. It is used with unsaturated materials such as acrylates, methacrylates... view more

ADDITOL® EPD by allnex is an amine co-initiator for radical UV curing. In combination with a hydrogen abstraction photoinitiator such as ADDITOL® ITX, ADDITOL® EPD is used in formulations containing... view more

ADDITOL® ITX by allnex is used as a radical photoinitiator for curing of inks and pigmented coatings. In combination with amine co-initiators or alpha cleavage photoinitiators, it is used in... view more

ADDITOL® TPO by allnex is a radical photoinitiator that can be used alone or in combination with other photoinitiators. It is used in formulations containing unsaturated materials such as acrylates... view more

Polyether modified polydimethylsiloxane. Acts as a silicone based surface additive for radiation curable systems. Offers improved substrate wetting, and leveling at low dosages. Provides good... view more

DELTA SC® 2031 by Delta Specialities is a solution of organically modified siloxane. Provides good substrate wetting of critical substrates and excellent anti-cratering by reduction of surface... view more

DOWSIL™ 163 Additive by Dow is a silicone antifoam compound. Acts as a defoamer. Possesses low viscosity and contains no solvents. Used in water-based and solvent-based screen printing ink... view more

Polymeric flow control agent and resin modifier. Used as additive for powder coatings, solvent based coatings, high solids, coil coatings, UV-coatings, printing inks based on flexographic or silk... view more

Omnirad 991 by IGM Resins is a type II photoinitiator that can be easily used in corporation with classic amine synergists or amine acrylates. It is used in clear systems like OPV and industrial... view more

Omnirad TPO L G (Former Irgacure TPO L) by IGM Resins is 2, 4, 6-trimethylbenzoylphenyl phosphinate. Used as an initiator for very low yellowing, white pigmented UV-lacquers, for UV screen printing... view more

Micronized, PTFE-modified polyethylene wax. Provides very good surface smoothness through combination of pure PTFE and hard polyethylene wax. Offers high scratch resistance and hardness. It gives... view more

Lanco™ TF 1720 by Lubrizol is a micronized & classified polytetrafluoroethylene modified polyethylene wax. It offers increased scratch resistance and slip in solvent-based coatings. It does not tend... view more

Micronized, PTFE-modified polyethylene wax. Offers very good surface smoothness. Provides high scratch resistance and hardness. Possesses good metal marking-, abrasion- and mar resistance. Reduces... view more

Micronized, PTFE-modified polyethylene wax. Offers very good slip through lowering of coefficient of friction. Provides good scratch and abrasion resistance, due to hardness of wax combination... view more

Lanco™ TF 1778 by Lubrizol is a micronized and classified, PTFE-modified polyethylene wax. Exhibits antiblocking properties, good dispersibility and metal marking-, scuffing-, slip- and abrasion... view more

Polymeric flow control agent and resin modifier. Used as additive to correct surface imperfections in solvent based coatings, high solids, UV-coatings and powder coatings. Printing ink formulations... view more