Omnirad TPO L G (Former Irgacure TPO L) by IGM Resins is 2, 4, 6-trimethylbenzoylphenyl phosphinate. Used as an initiator for very low yellowing, white pigmented UV-lacquers, for UV screen printing... view more

Monofunctional aromatic acrylate of low viscosity, moderate odor and good cure speed. Acts as a high MW resin compatibilizer and as an adhesion promoter. Imparts flexibility and enhanced adhesion... view more

SpeedCure TPO-L by Lambson (Sartomer) is a yellow colored ethyl (2,4,6-trimethylbenzoyl) phenyl phosphinate. Acts as an extremely efficient liquid Type I photoinitiator absorbing at 380 nm... view more

UviCure S105 by Lambson (Sartomer) is a low viscosity 7-oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate (standard cycloaliphatic epoxy base resin). Acts as a cationic... view more

UviCure S105E by Lambson (Sartomer) is a low viscosity 7-oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate (standard cycloaliphatic epoxy base resin). Acts as a cationic... view more

UviCure S110LV by Lambson (Sartomer) is a low viscosity 7-oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate (standard cycloaliphatic epoxy base resin). Acts as a cationic... view more

UviCure S128 by Lambson (Sartomer) is a low viscosity 7-oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate (standard cycloaliphatic epoxy base resin). Acts as a cationic... view more

Solsperse™ 39000 by Lubrizol is a 100% active polymeric dispersant. Improves the pigment dispersion and stability in UV cured coatings. Offers increased pigment concentration. Provides improved... view more

Solsperse™ 85000 by Lubrizol is a 100 % active polymeric dispersant for dispersion, wetting and stability of titanium dioxide and other inorganic particles in UV-curable coatings and inks. It is... view more

Solsperse™ 86000 by Lubrizol is a 100% active polymeric dispersant which improves pigment dispersion, wetting, flow and stability in UV-curable coatings and inks. It is suitable for organic and... view more

Microspersion® 1213 UVW by Micro Powders is an anionic dispersion of modified polypropylene wax, densified with silica. It is a convenient, ready-to-use, pourable anionic acrylic-stabilized wax... view more

Bisphenol-A epoxy acrylate resin solution. Used in UV/EB curable coating applications, finishes for wood, paper and metals, paints for inks, offset, serigraphics, metalographics and flexographics... view more

Bisphenol-A epoxy acrylate resin solution. Used in UV/EB curable coating applications, finishes for wood, paper and metals, paints for inks, off-set, serigraphics, metalographics and flexographics... view more

Bisphenol-A epoxy acrylate resin solution. Used in UV/EB curable coating applications, finishes for wood, paper and metals, paints for inks, off-set, serigraphics, metalographics and flexographics... view more

Low viscosity, epoxy acrylic resin. Used in UV or EB cured finishes for wood, paper and metals, paints for Inks, off-set, serigraphics, metalographics and flexographics. Offers very good hardness... view more

Polymeric flow control agent and resin modifier. Used as additive to correct surface imperfections in solvent based coatings, high solids, UV-coatings and powder coatings. Printing ink formulations... view more

EBECRYL® LED 04 by allnex is a UV LED additive booster. It is an acrylated polyamine, added as a co-resin to UV curable formulations. When combined with an appropriate photo initiator system, it... view more