Rilsan® FINE POWDERS ESY WHITE 7704 is a specialty, general-purpose polyamide 11 (PA 11) grade by Arkema. Used for metal coating and provides good electrical insulation. Suitable for electrical... view more

Rilsan® FINE POWDERS MINICOAT WHITE 1452 MAC by Arkema is polyamide 11 (PA 11) grade. Recommended for coating small metallic parts... view more

SNAP® 2147 BY Arkema is a self-crosslinking, APEO-free, water-borne acrylic emulsion. Used in combination with UV-curable acrylic emulsions. Suitable for clear & pigmented sealers and topcoats... view more

Synolac® 3510 SW 80 is a water-borne modified OFPE type alkyd emulsion. It contains propylene glycol dimethyl ether (PGDME) as the volatile component. Exhibits good chemical- & corrosion resistance... view more

Synolac® 811 S 48 is a water-borne acrylic type alkyd emulsion. It contains alcohol/water as the volatile component. Helps in eliminating cissing and other defects. Suitable for water soluble one... view more

Pure isophthalic resin. Shows high mechanical properties, chemical resistance and good wettability. Used as matrix without reinforcement for buttons, marbles, coatings and as fibre reinforced matrix... view more

Special polyester, pure resin for Pipes with high mechanical properties and chemical resistance, good wettability. Used as matrix without reinforcement for coatings... view more

Orthophthalic resin. Pure resin, light stabilized. Used as gel-coats with high mechanical properties and chemical resistance, good colour stability... view more

Pure Orthophthalic resin. Shows high mechanical properties and chemical resistance, good wettability. Used as matrix without reinforcement for coatings... view more

Orthophthalic, pure resin for pipes with high mechanical properties and chemical resistance, good wettability. Used as matrix without reinforcement for coatings... view more

AQAGloss® by BASF is an innovative APEO-free water-borne anionic acrylic/alkyd hybrid. Offers superior gloss and good gloss retention. Provides very good exterior durability, flow and leveling... view more

Acronal® 290 D-For Europe only by BASF is an aqueous styrene acrylic anionic dispersion. It possesses medium viscosity, very good pigment binding capacity and broad formulation latitude.It offers exceptional cost... view more

Acronal® 567 D by BASF is a plasticizer-free aqueous dispersion of a copolymer of butyl acrylate and styrene. Used in exterior masonry paints, synthetic resin plasters and basecoats for mineral... view more

Acronal® A 508 by BASF is an extremely fine dispersed APEO-free pure acrylic medium viscosity polymer anionic dispersion. Offers exceptional penetration and wetting of substrates and very good... view more

Acronal® A 509 by BASF is an acrylic medium viscosity anionic polymer dispersion. Offers very good exterior durability, exceptional cost performance, very good saponification and alkaline... view more

Polidene® 33-075 by Borchers (Milliken) is an aqueous emulsion of a PVDC copolymer. It is specifically developed for use as a binder for water-based high gloss coatings. It shows flame or fire... view more

Polidene® 33-083 by Borchers (Milliken) is an APEO-free, aqueous anionic PVDC copolymer emulsion. It is specifically developed for use as a binder for water-based metal primers. It exhibits... view more

Polidene® 33-086 by Borchers (Milliken) is an APEO-free, aqueous anionic self-crosslinking PVDC copolymer emulsion. It is specifically developed for use as a low flammability flexible binder and... view more

Polidene® 37-0065 by Borchers (Milliken) is an APEO-free, aqueous anionic self-crosslinking PVDC copolymer emulsion. It is specifically developed for use as a binder for water-based metal primers... view more

Polidene® 777 by Borchers (Milliken) is an aqueous anionic, PVDC copolymer emulsion. It is designed for use in the production of specialty paints and protective coatings. It shows oxygen & moisture... view more

Unilene® A-100 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It is obtained through catalytic polymerization in a continuous process, pastillated in a pearl-like... view more

Unilene® A-90 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It has a controlled naphthalene content which allows for a less pronounced odor when compared to... view more

Unilene® B-100 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It is recommended for paints and varnishes (road marking, printing inks, aluminium and protective... view more

Unilene® B-110 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It is obtained through catalytic polymerization in a continuous process, pastillated in a pearl-like... view more

Celvolit® 1602 by Celanese is a low VOC copolymer dispersion of vinyl acetate and ethylene. It is free from surfactants based on alkyl phenol ethoxylate. It is stabilized by surfactants and... view more

Vinyl acetate/ ethylene emulsion. It is VOC-free. Provides superior fire retardant properties compared to acrylic and styrene/acrylic emulsions. Offers optimized weathering, low dirt pick up... view more

Vinyl acetate ethylene copolymer. Used in interior low-VOC paints and primers... view more

Celvolit® 1774 by Celanese is an APEO-free, durable vinyl acetate ethylene (VAE) copolymer (54-56%) emulsion. It possesses low odor, good scrub resistance, excellent touch-up and efficient thickener... view more

Vinyl acetate-ethylene (VAE) based emulsion. Possesses good elongation and elasticity. Offers good water resistance with high strength. Provides very good bonding strength... view more

Haloflex™ 202 by Covestro is a non-flammable vinyl acrylic copolymer latex. It is used in primers and high build coatings for steel and rust convertors. It provides very good resistance to salt... view more

Haloflex™ 202-S by Covestro is a vinyl acrylic copolymer latex. It is used in primers, high build coatings for steel and fire retardant coatings. It offers good barrier properties, very good salt... view more

NeoPac™ E-106 by Covestro is an anionic aromatic urethane acrylic copolymer dispersion. It offers very good chemical and abrasion resistance. It provides tough, clear and highly water and... view more

NeoPac™ E-111 by Covestro is an acrylic polyurethane copolymer emulsion. It exhibits hardness and good chemical resistance. It offers very good imprint resistance and good solvent resistance. It... view more

NeoPac™ E-112 by Covestro is an aliphatic fatty acid modified acrylic polyurethane copolymer dispersion. It offers very good wood wetting, flow, high transparency, and filling properties. It shows... view more

MyCroFence AM 215 by Croda is a cationic acrylic resin grade. Exhibits antimicrobial properties. MyCroFence AM 215 by Croda is suitable for decorative paints and coatings... view more

MyCroFence AM 216 by Croda is a cationic styrene-acrylic resin. Used as a co-binder with MyCroFence AM 215 to gain more hydrophobicity and hardness. MyCroFence AM 216 is suitable for decorative... view more

520S-EF by DIC is an inorganic/ organic composite acrylic emulsion. It provides impregnation reinforcement. 520S-EF by DIC is environment-friendly aqueous resin... view more

5400EF by DIC is an acrylic styrene emulsion. Offers pigment dispersibility and pigment bonding properties. It is environmentally-friendly aqueous resin. 5400EF by DIC is used in metal, carpentry... view more

6620EF by DIC is a vinyl acetate acrylic emulsion. Offers pigment bonding properties and alkali resistance. It is environmentally-friendly aqueous resin. 6620EF by DIC is used in interior/exterior... view more

CE-2800 by DIC is a vinyl acetate acrylic emulsion. Offers leveling, roller coat suitability. It is environmentally-friendly aqueous resin. CE-2800 by DIC is used in interior coatings... view more

CF-6140 by DIC is an acrylic emulsion. Exhibits water bleaching resistance. It is environmentally-friendly aqueous resin. CF-6140 by DIC is used in carpentry/ flooring and stone-like coatings... view more

ELVAX™ 150W by DOW is an ethylene-vinyl acetate copolymer resin, suitable for solvent-based coatings. It contains 32wt% vinyl acetate comonomer content, "W" amide additive and slip and BHT... view more

ELVAX™ 40W by DOW is an ethylene-vinyl acetate copolymer resin. It contains 40wt% vinyl acetate comonomer content, "W" amide additive and slip and BHT antioxidant to be used as a thermal stabilizer... view more

ELVAX™ 460 by DOW is an ethylene-vinyl acetate copolymer resin. It contains 11wt% vinyl acetate comonomer content and BHT antioxidant to be used as a thermal stabilizer. It is designed for use in... view more

Acrylic emulsion. Used in traffic marking paints. Offers long retention of glass beads giving extended retro reflectivity/night time visibility. Exhibits enhanced opacity and reduced disposal cost... view more

Acrylic emulsion. Used for high durability traffic markings. Offers rapid drying and very good glass bead retention. Exhibits high durability and toughness. Provides improved life cycle and reduced... view more

PC-Mull® 815 by EPS is a clear in can, biobased, self-crosslinking all-acrylic polymer. It is designed to meet high chemical resistance and provide block resistance, ensuring there is not risk... view more

Eastman AQ™ 38S Polymer is sulfo-polyester resin by Eastman. It is recommended for inks. It offers direct dispersion in hot water without the assistance of amines, co-solvents, surfactants and other... view more

Eastman AQ™ 48 Ultra Polymer is a sulfopolyester resin by Eastman. It offers clear and glossy films. It provides direct dispersion in a mixture of ethanol and water at room temperature or in warm... view more

Eastman AQ™ 55S Polymer is a sulfopolyester resin by Eastman. It offers direct dispersion in hot water without the assistance of surfactants or other additives. It aids in the dispersion process of... view more

Eastman AQ™ 65S Polymer is a polyester resin by Eastman. It is recommended for industrial wood coating primers, overprints and printing inks. The aqueous dispersion of Eastman AQ™ 65S Polymer... view more

BLUESIL™ BP 9878 by Elkem Silicones is an aqueous polymethylsiloxane resin based emulsion. Provides two fundamental properties of the silicone technology to the paint film: water repellency and... view more

BLUESIL™ FLD 550HT by Elkem Silicones is a methyl phenyl polysiloxane. It is non-corrosive, radiation resistance and offers damping performance... view more

BLUESIL™ RES 6405 by Elkem Silicones is a 50 % solids methylphenylsilicone resin in toluene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack free... view more

BLUESIL™ RES 6405X by Elkem Silicones is a 50 % solids methylphenylsilicone resin in xylene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack... view more

BLUESIL™ RES 6406XM by Elkem Silicones is a polymethyl phenyl silicone resin in a 60% xylene solution. Provides good flexibility, dry tack-free at room temperature and high temperature resistance... view more