ACEMATT® 3400 distributed by DKSH acts as a matting agent. It is a specially after-treated thermal silica with a unique property profile. It offers high transparency, efficiency, surface... view more

Thetawet™ FS-8000 by Innovative Chemical Technologies is a 100% active, VOC- free, water soluble, non-ionic fluorosurfactant in a low viscosity aqueous solution. It offers excellent wetting and... view more

MULTIMOD™ APT-W1 by Macroocean is a linear polyester based, adhesion promoter. It can improve the adhesion to substrates or coatings of different paint & ink systems. This grade can be dissolved in... view more

BECKOPOX™ EP 2688/80MEK by allnex is an internally flexibilized, solid epoxy resin. It is mainly suited for high solids and solvent-based anticorrosion primers preferably cured with polyamines... view more

VIALKYD® VAF 6091 is an air drying high solids, long oil alkyd resin. It contains 89% vegetable fatty acids as triglycerides. VIALKYD® VAF 6091 is used for the production of high solids primers... view more

Low-molecular, branched-chain ethylene polymer. Used as abrasion preventive agent in printing inks and lacquer industry... view more

Low-molecular, branched-chain ethylene polymer. Used as abrasion preventive agent in printing inks and lacquer industry... view more

Joncryl® 580 by BASF is 100 % solids acrylic polyol. Exhibits good chemical resistance and hardness. Used in both two-component urethane and acid-cure coatings. Joncryl® 580 by BASF is ideal for... view more

BYK® -1788 by BYK is a combination of surface-active substances. It is a VOC- and silicone-free polymer defoamer for solvent-borne, high-solid, and solvent-free systems. It is particularly suitable... view more

Combination of silicone free polymers. Acts as an emission free defoamer. It also acts as air release agent. Possesses high degree of corrosion protection property. It is recommended for... view more

100% solids, low viscosity and solvent-free phenalkamine. Used as en epoxy curing agent in solvent free floor primers. Contains no plasticizer. Offers very good penetration and adhesion to damp, wet... view more

Long oil alkyd resin based on mixed fatty acids. Used in decorative high solid paints and stains for interior and exterior use and protective and maintenance primers and topcoats. Exhibits good... view more

Silicone modified long oil alkyd based on mixed fatty acids. Used for interior and exterior use and high solids topcoats. Offers improved outdoor durability... view more

Bisphenol A type (BPA) epoxy resin. It is a semi-solid resin formed by reacting epichlorohydrin with bisphenol A. Available in Asian countries. Used in resist inks, shipbuilding, and heavy duty... view more

Modified epoxy resin. It is flexible and exhibits excellent thermal shock resistance after curing. Used in non-solvent based coatings... view more

Modified epoxy resin. It is flexible and exhibits excellent thermal shock resistance after curing. Used in non-solvent based coatings... view more

Long-oil alkyd resin based on plant derived fatty acids. Used in high solid coatings, stains, decorative coatings and wood oils for garden furniture. Possesses good brushability. Offers low... view more

Finntalc M65LV by Elementis is an inert and soft, hydrated magnesium silicate with the chemical formula of Mg3Si4O10(OH)2. It is a pure, lamellar, coarse particle size talc with a controlled top-cut and... view more

ACEMATT® 3300 by Evonik is a matting agent. It is a specially after-treated thermal silica with a unique property profile. It is an outstanding solution for multiple tasks in formulating coatings... view more

ACEMATT® HK 390 by Evonik is an untreated, very-fine particle sized matting agent based on precipitated silica. It is particularly ideal for clear coats, where it produces a deep matte surface... view more