BENGEL® 828 distributed by DKSH is a super dispersible rheological additive for medium to high polarity solvent-based systems such as ketones, esters, glycol ethers, ether esters, alcohol. It is... view more

Luna-mer B55-LC distributed by DKSH is the salt of polycarboxylic acid cyclic amidine-based hardener. It offers color and gloss stability under normal baking conditions. It is suitable for... view more

THIXATROL® AS 8053 by Elementis is a 100% active, cost-effective, seed resistant rheological additive. It is a highly effective organic thixotrope for solvent-borne and high solids systems. It offers high... view more

THIXATROL® MAX by Elementis is a 100% active, cost-effective, seed resistant organic thixotrope rheological additive for solvent-based systems. It possesses viscosity, thixotropy and sag control in both... view more

THIXATROL® PM 8054 by Elementis is a 100% active, cost-effective, seed resistant rheological additive. It is a highly effective organic thixotrope for solvent-borne and high solids systems. It offers high... view more

THIXATROL® PM 8056 by Elementis is a 100% active, cost-effective, seed resistant rheological additive. It is a highly effective organic thixotrope for solvent-borne and high solids systems. It offers high... view more

THIXATROL® PM 8058 by Elementis is a 100% active, cost-effective, seed resistant organic thixotrope rheological additive. It possesses better compatibility in polar solvent systems. It offers high... view more

Zeocros® E110 by PQ Corporation is a novel, synthetic, inorganic sodium aluminosilicate-based zeolite. It is used as a titanium dioxide extender in powder coatings. It retains opacity, color... view more

ADDITOL® VXW 6235 by allnex is a foam retardant that is mainly recommended for powder coating materials to be used in aqueous systems such as emulsion paints, 2-component epoxy systems and flooring... view more

ADDITOL® XW 6569 by allnex is a modified silicone-based defoamer. It is emulsifier-free with no influence on rheology modifiers and resin stability. This highly effective grade is easy to... view more

Lonzacure® M-CDEA by Arxada acts as a curing agent for epoxides in chemical-resistant coatings. Provides very good dynamics, temperature resistance, low water absorption, and hydrolytic and light... view more

Lonzacure® M-DEA by Arxada is an epoxy curing agent for chemical-resistant coatings. Offers very good chemical stability against acidic and basic reagents, high Tg (up to 200°C in combination with... view more

CAB-O-SIL® TS-710 by Cabot is a polydimethylsiloxane (PDMS) modified, low surface area fumed silica. Acts as a thickener. Compatible with epoxy, polyurethane and vinyl ester resins. Provides easy... view more