Borchers® AF 1270 by Borchers (Milliken) is a silicone-based, polysiloxane containing defoamer and air release agent for solvent-based systems. Offers good binder compatibility. It contains anti-cratering properties... view more

Borchi® Gol LA 6 by Borchers (Milliken) is a polyether modified polysiloxane additive for solvent-based coating systems for improved substrate wetting, flow and leveling. Provides slip & block resistance and can... view more

Esacure 1187 distributed by DKSH acts as a cationic photoinitiator. It is modified sulphonium salt hexafluorophosphate diluted in 25% propylene carbonate, It does not release any benzene upon... view more

Foam Blast® 20F by DyStar is zero-VOC, 100% active silicone compound designed to provide maximum foam control in UV and EB-cured inks, overprint varnishes and coating systems. It is suitable for... view more

Foam Blast® 550 by DyStar is 100% active, non-polar, synthetic polyol-based, specialized non-silicone foam control agent. It is suitable for UV/EB-cured overprint varnishes, inks, industrial coatings... view more

ADDITOL® VXW 6208 by allnex is a polymer non-ionic dispersing additive for grinding inorganic and organic pigments in water or in water-borne alkyd resin, acrylic, epoxy and urethane emulsions. The... view more

ADDITOL® VXW 6374 by allnex is a wetting agent for neutral as well as amine neutralized waterborne coatings systems. It is free of nonylphenol ethoxylate and VOC (volatile organic compound). It is... view more

ADDITOL® XW 6581 by allnex is a wetting agent and ionic & non-ionic surfactant with pigment affinity groups. It is free of nonylphenolethoxylates and VOC. It improves wetting of organic and... view more

BRB Siloen® LA 271 is a flow and leveling agent by BRB International BV. It is glycol-modified silicone fluid suitable for water- & solvent-borne and radiation curing systems with good substrate... view more

Afcona -2290 by Afcona Additives is silicone-free anti-foam and de-aeration agent for solvent-based and solvent-free systems for epoxy, polyurethane, UPE and UV coatings. Afcona -2290 is applicable... view more

Afcona -2723 by Afcona Additives is silicone based defoamer. Also acts as air-releaser for unsaturated polyester, polyurethane, UV and epoxy resin systems. In epoxy resin systems will not only gives good... view more

Organically modified polyalkyl polysiloxane. Acts as a slip and leveling agent with good defoaming effect. Most organically modified polysiloxanes will stabilized foam and this make them not... view more

Organically modified polyalkyl polysiloxane. Acts as a slip and leveling agent with good defoaming effect. It is better in slip, compatibility and better in defoaming. Used in foam sensitive systems... view more

Organically modified polyalkyl polysiloxane. Acts as a slip and leveling agent with good defoaming effect. The alkyl modification of AFCONA-3239 is longer than AFCONA-3236 and this makes AFCONA 3239... view more

Efka® PB 2744 by BASF is a ultra-low VOC, hazard label-free polymer based on small amount of silicone. Acts as an excellent defoamer. Offers fast and effective de-aeration. Provides long-term... view more

Antifoam-containing silane solution. Acts as a defoamer. Presents advantage of low odor. Provides smooth surface. Used in epoxy and polyurethane floor coating systems. The recommended dosage is... view more

Solvent-free modified polysiloxane. Acts as a defoamer, leveling agent and slip/mar resistance agent. Improves levelling and surface smoothness. Increases slip and mar-resistance. Avoids formation... view more