Lanco™ PP 1362 SF by Lubrizol is a very fine particle size, modified polypropylene wax. It is very finely micronized and classified with a very smooth and sliky surface feel. Exhibits good... view more

Micronized, PTFE-modified polyethylene wax. Provides very good surface smoothness through combination of pure PTFE and hard polyethylene wax. Offers high scratch resistance and hardness. It gives... view more

Lanco™ Glidd 6546 by Lubrizol is a high solid aqueous wax dispersion. It is designed for use in water-based coatings with high efficiency. It provides good scratch and abrasion resistance. It is... view more

Lanco™ TF 1720 by Lubrizol is a micronized & classified polytetrafluoroethylene modified polyethylene wax. It offers increased scratch resistance and slip in solvent-based coatings. It does not tend... view more

Micronized, PTFE-modified polyethylene wax. Offers very good surface smoothness. Provides high scratch resistance and hardness. Possesses good metal marking-, abrasion- and mar resistance. Reduces... view more

Liquid Hindered Amine Light Stabilizer (HALS). Provides very good light stability to variety of coating systems, including waterborne and UV curable coatings, and long term stability to a variety of... view more

Liquid Hindered Amine Light Stabilizer (HALS). Provides very good light stability to variety of coating systems, including waterborne and UV curable coatings, and long term stability to a variety of... view more

Highly efficient, non-yellowing, 2-hydroxy-2-methyl-1-phenyl-1-propanone. Used in floor tile, exterior and coil coating, printing inks and clear coatings for wood, plastic, paper, metal, and optical... view more

1-hydroxy-cyclohexyl-phenyl-ketone. Acts as a highly efficient, non-yellowing photoinitiator. Especially designed for acrylate UV curable systems in which minimal yellowing and color stability after... view more

Benzil dimethyl ketal. Used as an efficient photoinitiator printing inks, clear coatings for plastic, paper and metal materials, and fillers and topcoats for coating of wood and wood substitutes... view more

CN 111US by Sartomer (Arkema Group) is a difunctional epoxidized soy bean oil acrylate oligomer. Acts as wetting and flow agent. Offers pigment wetting characteristics, high impact strength, low shrinkage as... view more

SILTOP® 715 by Siliconi is an APEO-free, non-ionic silicone antifoam agent and defoamer. It is a VOC-free and odorless grade and is designed to control and eliminate foam in aqueous systems... view more

SILTOP® 750 by Siliconi is an APEO-free, non-ionic silicone antifoam agent and defoamer. It is a VOC-free and odorless grade and is designed to control and eliminate foam in aqueous systems... view more

UNIQFOAM 120 S by Uniqchem is a heat stable, silicone-free defoaming agent. It does not interfere with intercoat adhesion. Compatible with 2-pack epoxy, alkyd, acrylic and polyester resins. Designed... view more

Polymeric flow control agent and resin modifier. Used as additive to correct surface imperfections in solvent based coatings, high solids, UV-coatings and powder coatings. Printing ink formulations... view more

S-8270 by Wuhan Bolachem New Material is a silicone leveling agent. It offers excellent anti-cratering effects in oil-, solvent- & water-based paints and radiation-cured systems. It is suitable for furniture... view more

Polyether siloxane copolymer. Acts as wetting agent and anti-crater aid. It provides low foam stability and powerful reduction of surface tension in aqueous systems. Wynca® XHG-247 offers rapid... view more