Bentone® 52 by Elementis acts as a highly efficient and cost-effective rheological additive for low- to medium-polarity solvent systems. It is an organic derivative of bentonite clay. It provides... view more

Bentone® 54 by Elementis acts as a rheology modifier. It increases viscosity, provides thixotropy, prevents pigment settling during storage and improves flow & leveling. It controls sagging on... view more

Bentone® SD-1 by Elementis acts as a very easily dispersible, rheological additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents. It is an organic... view more

Bentone® SD-2 by Elementis acts as a rheological additive for paints containing moderate to high polarity solvents such as ketones, esters, glycol ethers and ether esters and alcohols. It is an organic... view more

Bentone® SD-3 by Elementis is an organic derivative of hectorite (smectite) clay-based highly efficient rheological additive. It is designed for use in coating systems with a wide range of solvent... view more

Surfynol® 104H by Evonik is a nonionic wetting agent and molecular defoamer containing a hydrophilic portion. It offers surface tension reduction, foam control, viscosity stabilization and reduced... view more

Surfynol® 104PA is a non-ionic wetting and defoaming agent by Evonik. It is a multifunctional surfactant. Offers reduced water sensitivity. Used in water- & solvent-borne and radiation curing car... view more

Surfynol® 61 by Evonik is a volatile substrate wetting agent. It provides good substrate wetting properties on PE and PP. It evaporates from surfaces without leaving residues. It offers defoaming... view more

Surfynol® 82 by Evonik is a dimethyl octyne diol-based non-foaming wetting agent. It possesses reduction of static surface tension and dynamic surface tension. It provides substrate wetting... view more

Solution of a modified special polyester in n-butyl acetate. Used in industrial coatings, silk screen inks and architectural coatings. Offers improved intercoat adhesion and corrosion protection... view more

A-C® 1810A by Honeywell is a very low viscosity, medium density polyethylene (PE) homopolymer. Used in solvent borne coatings, and in heat-set and liquid solvent borne inks to improve mar and rub... view more

A-C® 6 by Honeywell is a low density polyethylene (LDPE) homopolymer. Designed for solvent-borne coatings, heatset and liquid solvent-borne inks. Used to improve surface properties such as rub, mar... view more

A-C® 629 by Honeywell is a low density oxidized polyethylene (LDOxPE) homopolymer. Used in solvent-borne coatings as a rheological aid, and inks. It lowers the coefficient of friction. A-C® 629... view more

A-C® 645P by Honeywell is a low density oxidized ethylene-vinyl acetate copolymer. Designed for use in solvent borne coatings. It has a high level of functionality which makes it a highly efficient... view more

A-C® 656 by Honeywell is a low density oxidized polyethylene (LDOxPE) homopolymer. Used in solvent-borne coatings as a rheological aid. It has a low hardness which makes it optimum for pourable or... view more