Saponification-resistant polyvinylethyl ether. Used as a plasticizing soft resin for cellulose nitrate coatings, in printing inks for packaging to improve adhesion to aluminium foil and cellophane... view more

Lutonal® A 50 by BASF is a saponification-resistant polyvinylethyl ether. It also acts as an adhesion promoter. Used as a plasticizing soft resin for cellulose nitrate coatings and in printing inks... view more

Saponification-resistant solution of a polyvinyl methyl ether. Used as a plasticizing soft resin for increasing adhesion of printing inks and of cellulose nitrate and resin coatings... view more

Propylene glycol monomethyl ether-1,2-acetate. Acts as a medium volatility, clear, slightly hygroscopic solvent for coatings and printing inks. Also acts as a flow improver and coalescent in... view more

Acetic acid, n-propyl ester. Acts as a clear, colorless, volatile solvent for coatings, printing inks and chemical downstream industries. Possesses a characteristic odor reminiscent of acetone and a... view more

Oakite® Betasolv by BASF is a blend of biodegradable, non-regulated solvents and emulsifiers. It improves working conditions with low odor, low volatility and no flash point at use dilutions... view more

Perenol® S 58 by BASF is organo-modified polysiloxane-based non-reactive slip modifier and leveling agent for printing inks, coatings and paints. Exhibits very good substrate wetting and reduction... view more

Organo-modified polysiloxane. Used as a non-reactive slip modifier and leveling/wetting agent for printing inks, overprint varnishes, coatings and paints. Exhibits very good substrate wetting and... view more

Organomodified Polysiloxane. Used as a non-reactive slip and leveling agent for UV-printing inks and overprint-varnishes. Enhances a very good substrate wetting due to the reduction of the surface... view more

Polyethylene emulsion. Acts as an additive to improve slip properties, anti-blocking, resistance to offsetting. Used in water-thinnable enamels, inks and other finishes. Offers improved slip and... view more

Quadrol® Polyol by BASF is tetra (2-hydroxypropyl) ethylenediamine. It is a tetrafunctional, viscous alkaline liquid. Quadrol® Polyol is used in the manufacture of inks and coatings... view more

Rheovis® CRX by BASF is a highly effective acrylic polymer. Used as a rheological control additive for water-borne inks and coating systems. Offers high efficiency over a pH range 7.5-10. Provides... view more

Solvenon® PM by BASF is a colorless, clear, hygroscopic, meth­ylpropylene glycol. It is a medium-volatility, water-miscible neutral solvent for coatings and printing inks. Possesses a mild... view more

Tripropylene glycol mono n-butyl ether. Acts as a clear, odorless, light yellowish, mobile solvent for paints and printing inks. Also acts as a coalescing agent for water-borne architectural and... view more

Non-drying alkyd resin based on natural, saturated fatty acids. Used as binder for offset printing inks. Exhibits superior pigment wetting and high pigment loading. Offers very good image/non-image... view more

Texaphor® SF 73 by BASF is the modified polyurethane in a VOC-free carrier. It is used in non-aqueous lacquer, ink-systems, especially where a VOC-free dispersing additive is required such as in... view more

Texaprint® SDCE by BASF is dicaprylether, substitute for mineral oil. It is a high boiling solvent with broad application. Texaprint® SDCE is used for offset printing inks... view more

Texaprint® SJEH by BASF is a fatty acid-2-ethylhexylester, substitute for mineral oil. It acts as a solvent for offset printing inks... view more

Texaprint® SKEH by BASF is a fatty acid-2-ethylhexylester. Used as solvent for offset printing inks... view more

Texaprint® SLIP by BASF is a fatty acid isopropyl ester, substitute for mineral oil. Acts as a solvent. Texaprint® SLIP is used for offset printing inks... view more