Gasil® HP395 by PQ Corporation is an easily wettable/dispersible, large particle size matting- and anti-slip agent. It is based on synthetic amorphous silica. It is suitable for water and... view more

Rilsan® D40 NATURAL is a high performance, low density polyamide 11 (PA 11) grade by Arkema. Recommended for coil-, wood- and plastic coatings. Exhibits good dispersion capacity, good impact... view more

Bentone® 52 by Elementis acts as a highly efficient and cost-effective rheological additive for low- to medium-polarity solvent systems. It is an organic derivative of bentonite clay. It provides... view more

Bentone® 54 by Elementis acts as a rheology modifier. It increases viscosity, provides thixotropy, prevents pigment settling during storage and improves flow & leveling. It controls sagging on... view more

Bentone® SD-1 by Elementis acts as a very easily dispersible, rheological additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents. It is an organic... view more

Bentone® SD-2 by Elementis acts as a rheological additive for paints containing moderate to high polarity solvents such as ketones, esters, glycol ethers and ether esters and alcohols. It is an organic... view more

Bentone® SD-3 by Elementis is an organic derivative of hectorite (smectite) clay-based highly efficient rheological additive. It is designed for use in coating systems with a wide range of solvent... view more

A-C® 1810A by Honeywell is a very low viscosity, medium density polyethylene (PE) homopolymer. Used in solvent borne coatings, and in heat-set and liquid solvent borne inks to improve mar and rub... view more

A-C® 820A by Honeywell is a medium density polyethylene (PE) homopolymer with a very low viscosity. Used in solvent-borne coatings, heatset and liquid solvent-borne inks. A-C® 820A improves mar- &... view more

A-C® 9F is a low density polyethylene (LDPE) homopolymer. Designed for use in solvent-borne coatings, heatset and liquid solvent-borne inks. It improves surface properties such as rub, mar &... view more

ACumist® 1863 by Honeywell is a polypropylene-maleic anhydride copolymer. It was designed to exhibit unique physical properties required for surface modifications in inks and coatings. ACumist® 1863... view more

ACumist® 3105B is a high molecular weight, micronized PTFE-modified polyethylene homopolymer by Honeywell. Provides excellent slip, excellent abrasion- and blocking resistance. ACumist® 3105B is... view more