EBECRYL® LED 03 by allnex is a low viscosity amine modified polyether acrylate oligomer that can be added as a co-resin to UV curable formulations. When it is combined with an appropriate... view more

EBECRYL® 140 by allnex is ditrimethylolpropane tetraacrylate, a reactive diluent. It exhibits good cure response, light color and low irritancy. It is compatible with a wide range of acrylated... view more

EBECRYL® 145 by allnex is Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in... view more

EBECRYL® 150 by allnex is ethoxylated bisphenol A derivative diacrylate. It improves the cure response, hardness, wetting and chemical resistance of UV/EB curable coatings and inks. It possesses... view more

EBECRYL® 160 by allnex is a reactive diluent used in ultraviolet light (UV) and electron beam (EB) energy-curable coatings & inks. It is a trifunctional diluting oligomer that polymerizes when... view more

EBECRYL® 1608 by allnex is diacrylate ester of bisphenol A epoxy resin diluted with 15% of oligotriacrylate. This resin is characterized by its low odor, light color, low irritancy and very fast... view more

EBECRYL® 341 by allnex is a low viscosity, low odor, silicone-free slip additive master batch. It provides improvement of slip between UV/EB cured coatings, good inter-coat adhesion and glueability... view more

EBECRYL® 350 by allnex is a silicone diacrylate that improves slip, substrate wetting, coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron... view more

EBECRYL® 3500 by allnex is a modified bisphenol A epoxy diacrylate. It exhibits relatively low viscosity and adhesion to many plastics. Films cured by ultraviolet light (UV) or electron beam (EB)... view more

EBECRYL® 3639 by allnex is a light color, special epoxy acrylate exhibiting medium viscosity, good flexibility and very high reactivity. It is especially recommended to formulate radiation curable... view more

EBECRYL® 367 by allnex is a low VOC, solvent-free polyester acrylate designed to be used at additive levels in UV/EB inks and coatings to improve adhesion onto plastic substrates. It is BPA- Bis... view more

EBECRYL® 3700 by allnex is the diacrylate ester of a bisphenol A epoxy resin, and exhibits low odor and exceptional cure response. Films of EBECRYL® 3700 cured by ultraviolet light (UV) or electron beam... view more

EBECRYL® 3702 by allnex is a fatty acid modified bisphenol A epoxy diacrylate. It exhibits low odor, outstanding flow, leveling and pigment wetting properties. Offers good hydrophilic-lipophilic... view more

EBECRYL® 3720 by allnex is a bisphenol A epoxy diacrylate. It exhibits light color, good stability and fast cure response. Films cured via exposure to ultraviolet light (UV) or electron beam (EB)... view more

EBECRYL® 3748/20 by allnex is bisphenol A epoxy diacrylate. It is diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480) for reduced viscosity and easier handling... view more

EBECRYL® 40 by allnex is a tetrafunctional polyether acrylate characterized by low viscosity, mild odor, and light color. When formulated with acrylate oligomers, it provides fast cure response in... view more

EBECRYL® 436 by allnex is a reactive chlorinated polyester resin diluted 40% with the reactive diluent trimethylolpropane triacrylate (TMPTA). It exhibits good lithographic behavior, pigment wetting... view more

EBECRYL® 438 by allnex is a reactive chlorinated polyester resin diluted 40% with the reactive diluent OTA-480. It exhibits good lithographic behavior, pigment wetting properties and fast cure... view more

EBECRYL® 4858 by allnex is a low viscosity aliphatic urethane diacrylate. Due to a low intrinsic viscosity, it offers ease of formulating in energy curable systems that are low in viscosity with... view more

EBECRYL® 526 by allnex is a chlorine free polyester resin diluted with TMPTA. It has been specifically designed to provide good adhesion to plastic substrates. It is cured by ultraviolet light (UV)... view more