Airase® 4655 Defoamer by Evonik is an organic oil-based defoamer. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). It is designed to... view more

AIRASE® 5355 Defoamer by Evonik is a siloxane-based defoamer. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol ethoxylates (APEs). It is designed to control and... view more

AIRASE® 5655 Defoamer by Evonik is a very compatible defoamer concentrate based on polyether siloxane technology. It does not contain added mineral oils, hazardous air pollutants (HAPs) or alkyl phenol... view more

Dynol™ 810 by Evonik is a 100% active, non-silicone, non-fluorine, low foam superwetter/ surfactant. It does not contain any added APEs, HAPs or VOCs. Provides a superior balance of properties... view more

Dynol™ 960 by Evonik acts as a superwetting surfactant. Provides good flow and leveling in water-borne coatings and inks. It contains no added hazardous air pollutants (HAPs), APEs) and VOCs. Shows... view more

A-C® 316 by Honeywell is a hard, high drop point, high density, oxidized polyethylene homopolymer. Used in water borne coatings and inks, overprint varnishes and polishes to improve surface... view more

A-C® 330 is a high density, hard, high drop point, oxidized polyethylene homopolymer by Honeywell. Used in overprint varnishes, water borne coatings and inks and polishes to improve surface... view more

A-C® 395 by Honeywell is a hard, high-density oxidized polyethylene homopolymer grade with high drop point. Designed to improve surface properties including mar and abrasion resistance by... view more

A-C® 395A by Honeywell is a high-density oxidized polyethylene homopolymer. It is a hard grade with high drop point. Designed to improve surface properties including mar and abrasion resistance by... view more

ACumist® A-12 by Honeywell is a micronized oxidized polyethylene homopolymer. Used in water-based coatings, flexographic- & gravure inks, and overprint varnishes. Provides outstanding abrasion... view more

Esacure 1001 M by IGM Resins is a type II photoinitiator. It is based on difunctional ketosulphone class. It is suitable for LED cure, through and surface cure.It is used to initiate radical... view more

Esacure KIP 150 by IGM Resins is an oligomeric polyfunctional alpha-hydroxyketone. It acts as a photoinitiator. It exhibits high reactivity and non-yellowing properties.It is suitable for through and... view more

Omnirad 127 (Former Irgacure 127) by IGM Resins is a highly efficient type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates-in... view more

Omnivadd ED 2190 by IGM Resins acts as a defoamer in various water-based coating as well as in water-based ink systems. It is used in flexographic, printing inks, gravure and over print varnishes. It is... view more