EBECRYL® 860 by allnex is an epoxidized soya oil acrylate. Exhibits good hydrophilic-lipophilic balance for lithography and good surface appearance. It improves the flow and leveling of UV or... view more

EBECRYL® 892 by allnex is a light color, low viscosity tetra-functional polyether acrylated oligomer. It also improves the hardness and solvent resistance of ultraviolet light or electron beam cured... view more

EBECRYL® LEO 10103 by allnex is a multifunctional, modified polyether acrylate. It is produced following good manufacturing practices (GMP). In presence of an amine synergist, it can enable the UV curing... view more

OTA-480 by allnex is a low viscosity reactive diluent based on a trifunctional oligoacrylate. It exhibits light color, low irritancy and good flexibility. Its high functionality contributes to... view more

OTA 480 BC by is a low viscosity reactive diluent based on a trifunctional oligoacrylate. It exhibits light color, low irritancy and good flexibility. Its high functionality contributes to... view more

Bentone® 128 by Elementis acts as a rheology modifier. It is a special organically modified montmorillonite clay designed for non-polar printing inks based on naphtenic and paraffinic solvents and... view more

A-C® 6 by Honeywell is a low density polyethylene (LDPE) homopolymer. Designed for solvent-borne coatings, heatset and liquid solvent-borne inks. Used to improve surface properties such as rub, mar... view more

A-C® 7 is a low density polyethylene (LDPE) homopolymer powder. A-C® 7 is used in solvent-borne coatings, heatset and liquid inks to improve surface properties and appearance... view more

A-C® 8 is a low density polyethylene (LDPE) homopolymer by Honeywell. Designed for use in solvent-borne coatings, heatset and liquid solvent-borne inks. A-C® 8 improves surface properties such as... view more

A-C® 820A by Honeywell is a medium density polyethylene (PE) homopolymer with a very low viscosity. Used in solvent-borne coatings, heatset and liquid solvent-borne inks. A-C® 820A improves mar- &... view more

A-C® 9 by Honeywell is a low density polyethylene (LDPE) homopolymer. It improves surface properties such as rub, mar & abrasion resistance, by lowering the coefficient of friction. A-C® 9 is used... view more

Esacure 1001 M by IGM Resins is a type II photoinitiator. It is based on difunctional ketosulphone class. It is suitable for LED cure, through and surface cure.It is used to initiate radical... view more