Bentone® 128 by Elementis acts as a rheology modifier. It is a special organically modified montmorillonite clay designed for non-polar printing inks based on naphtenic and paraffinic solvents and... view more

A-C® 820A by Honeywell is a medium density polyethylene (PE) homopolymer with a very low viscosity. Used in solvent-borne coatings, heatset and liquid solvent-borne inks. A-C® 820A improves mar- &... view more

A-C® 9F is a low density polyethylene (LDPE) homopolymer. Designed for use in solvent-borne coatings, heatset and liquid solvent-borne inks. It improves surface properties such as rub, mar &... view more

ACumist® 3105B is a high molecular weight, micronized PTFE-modified polyethylene homopolymer by Honeywell. Provides excellent slip, excellent abrasion- and blocking resistance. ACumist® 3105B is... view more

ACumist® 3205B by Honeywell is a micronized PTFE-modified polyethylene homopolymer with high molecular weight. Used in high-gloss and general-purpose solvent-borne, UV/EB cured coatings, stains... view more

ACumist® 3405 by Honeywell is a micronized PTFE-modified polyethylene homopolymer. It has a high molecular weight. Provides excellent abrasion resistance, outstanding slip and excellent scratch... view more

Esacure 1001 M by IGM Resins is a type II photoinitiator. It is based on difunctional ketosulphone class. It is suitable for LED cure, through and surface cure.It is used to initiate radical... view more

Esacure 3644 by IGM Resins is a highly efficient type II photoinitiator generally used in combination with an amine like Esacure A198, Ominpol ASA or Photomer® 4250. It shows high reactivity, good... view more

Esacure A 198 by IGM Resins is a polyfunctional high molecular weight amine. It is co-initiator that when combined with type II photoinitiator gives high speed cure in both clear and pigmented... view more

Esacure KIP 160 by IGM Resins is a new photoinitiator characterized by excellent reactivity especially in comparison with conventional alpha hydroxy ketones. It is suitable for through and surface cure... view more

Omnicat 270 by IGM Resins is a photoinitiator recommended for the cationic polymerization of formulations based on epoxies or oxetane. It is a solid of a high-molecular-weight sulfonium salt free of... view more