Esacure 3644 by IGM Resins is a highly efficient type II photoinitiator generally used in combination with an amine like Esacure A198, Ominpol ASA or Photomer® 4250. It shows high reactivity, good... view more

Esacure KIP 160 by IGM Resins is a new photoinitiator characterized by excellent reactivity especially in comparison with conventional alpha hydroxy ketones. It is suitable for through and surface cure... view more

Omnicat 270 by IGM Resins is a photoinitiator recommended for the cationic polymerization of formulations based on epoxies or oxetane. It is a solid of a high-molecular-weight sulfonium salt free of... view more

Omnirad 127 (Former Irgacure 127) by IGM Resins is a highly efficient type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates-in... view more

Omnirad 127D by IGM Resins is a highly efficient type I photoinitiator that can be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates in combination with mono or... view more

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand by KaMin. Used in architectural coatings, industrial coatings, pigmented coatings... view more

Lithosperse® 7005 CS is a high performance treated kaolin by KaMin. Designed to improve rheology with outstanding dispersibility and resistance to clay bleed in lithographic cold set inks... view more

Polygloss® 90 by KaMin is an ultra-fine particle size and high brightness kaolin based on hydrous aluminum silicate. Provides ease of dispersion and improved gloss in both aqueous and solvent-borne... view more

An organic scarlet pigment. Possesses light fastness along with heat resistance, water resistance, oil resistance, acid resistance and alkali resistance. Used mainly for water based ink. Can also be... view more

Polymist® F284 by Syensqo is micronized PTFE based on an abrasion resisting agent. It is a medium molecular weight grade with excellent thermal stability and is composed of discrete particles. Offers... view more

Polymist® F5A EX by Syensqo is micronized PTFE based abrasion resisting agent. It is composed of discrete particles. It is also non-hygroscopic and can be used over a wide temperature range from -190°C... view more

Polymist® XPP-513 by Syensqo is a micronized PTFE. Acts as an abrasion resisting agent. Offers wear, rub and scratch resistance. Recommended for aircraft coatings (i.e. fuselage, wings), building and... view more

Polymist® XPP-514 by Syensqo Micronized PTFE. Acts as an abrasion-resisting agent. Offers wear, rub and scratch resistance. Recommended for aircraft coatings (i.e. fuselage, wings), building and... view more

Polymist® XPP-535 by Syensqo is micronized PTFE. It acts as an abrasion resisting agent. Offers wear, rub and scratch resistance. It finds application in aircraft coatings (i.e. fuselage, wings)... view more