Omyacarb UFT-FL by Omya is calcium carbonate (limestone). It is a mineral filler. Contains very minute quantity of silica (quartz) that is a naturally occurring component of limestone. Omyacarb... view more

Calcium carbonate (limestone). It is a mineral filler. Contains very minute quantity of silica (quartz) that is a naturally occurring component of limestone. Used in decorative paints. Complies with... view more

Omyacoat 420-IP by Omya is ultra-fine ground calcium carbonate-based mineral filler. It allows optimization of titanium dioxide content based on the opacifying effect. It offers very good... view more

Calcium carbonate (limestone). It is a mineral filler. Contains very minute amount of silica (quartz) which is a naturally-occurring component of limestone. Used in decorative paints... view more

Natural, calcium carbonate powder. Acts as a filler. Is manufactured from high purity white limestone. Used in road-marking paint, terrazzo and texture coatings... view more

Gold OPA300 by Opaali Technology is a brass gold colored pearl effect pigment. It has a particle size range of 10-60 μm. It is made of mica coated titanium dioxide. It exhibits golden pearl luster... view more

Gold OPA304 by Opaali Technology is a gold colored pearl effect pigment. It has a particle size range of 10-100 μm. It is made of mica coated titanium dioxide. It shows special gloss, resistance to... view more

Gold OPA305 by Opaali Technology is a gold yellow colored pearl effect pigment. It has a particle size range of 10-100 μm. It is made of mica coated titanium dioxide. Gold OPA305 exhibits golden... view more

Gold OPA311 by Opaali Technology is a gold colored pearl effect pigment for use in architectural coating, car paints, auto paints and inks. It has a particle size range of 10-60 μm. It is made of... view more

Gold OPA340 by Opaali Technology is made of mica coated titanium. It is a bronze gold colored pearl effect pigment. It has a particle size range of 10-60 μm. It exhibits golden pearl luster. It... view more

Orco AC™ White ZP by Organic Dyes and Pigments is a zinc phosphate, inorganic pigment. It is designed for coatings applications... view more

Orco AC™ Yellow SC by Organic Dyes and Pigments is a strontium chromate, inorganic pigment. Orco AC™ Yellow SC is designed for coatings applications... view more

Orco AC™ Yellow ZC by Organic Dyes and Pigments is a zinc chromate, inorganic pigment. Orco AC™ Yellow ZC is recommended for coatings applications... view more

Orco BV™ Yellow by Organic Dyes and Pigments is a bismuth vanadium, inorganic pigment. Exhibits excellent light fastness. Orco BV™ Yellow is designed for coatings applications... view more

Orco CPX™ Black A by Organic Dyes and Pigments is a copper chromite, inorganic pigment. Exhibits excellent light fastness. Orco CPX™ Black A is designed for inks and coatings applications... view more

Hiblack® 40L by Orion is an amorphous carbon that offers good jetness and tinting strength... view more

Hiblack® 420B by Orion is an amorphous carbon that possesses electroconductive and antistatic properties. Hiblack® 420B has very good dispersion characteristics... view more

Hiblack® 5L by Orion is an amorphous carbon that is used for offset and letterpress inks, newspaper inks, heat set inks, packaging printing inks and flexo inks... view more

Printex® 140 V by Orion is an amorphous conductive carbon black pigment. Used in coatings and inks... view more

Dentall WK-200B by Otsuka Chemical is a white conductive filler that is uniformly coated with nano-order transparent conductive layers on the surface of inductor made of potassium titanate fibers... view more

Dentall WK-500 by Otsuka Chemical is a white conductive filler. It is uniformly coated with nano-order transparent conductive layers on the surface of inductor made of potassium titanate fibers... view more

Dentall WK-500B is a white conductive filler by Otsuka Chemical. It is uniformly coated with nano-order transparent conductive layers on the surface of inductor made of potassium titanate fibers... view more

EnvironOxide® BG-836 by Cathay Industries is a yellow colored iron oxide pigment. It is obtained from coal mine drainage through a waste elimination process that results in clean water. It is a... view more

EnvironOxide® BG-838M by Cathay Industries is a yellow colored iron oxide pigment. The “M” processing delivers a high degree of transparency that enables it to be used in conjunction with polished... view more

EnvironOxide® BR-832 by Cathay Industries is a red colored iron oxide pigment. It is a lightfast and chemical resistant pigment. It is obtained from coal mine drainage through a waste elimination... view more

EnvironOxide® BR-832M by Cathay Industries is a red colored iron oxide pigment. The “M” processing delivers a high degree of transparency that enables it to be used in conjunction with polished... view more

EnvironOxide® BR-834 by Cathay Industries is a brown colored iron oxide pigment. Shows excellent performance, outstanding dispersibility, high purity and durability. Suitable for processing in high... view more

Copolymer of vinyl chloride and vinyl acetate. Used in many specialty applications such as lacquers. Offers internal plasticizing effect, easy processing and very good pigment wetting... view more

SIC-300 by P&S Chem is a non-toxic, anti-corrosion pigment, surface treated with white silica and phosphate. It is easily dispersible and suitable for use in water-borne paint systems, general... view more

Dyspergator RP by PCC Group is a sodium salt of naphthalenesulfonic acid polymerized with formaldehyde. Acts as a dispersant and emulsifier. It is a light brown powder that is soluble in water and... view more

Dyspergator SBRP by PCC Group is a sodium salt of naphthalenesulfonic acid polymerized with formaldehyde. Acts as a dispersant and emulsifier. It is a light brown powder that is soluble in water and... view more

RODYS LP by PCC Rokita is an aqueous solution of naphthalenesulfonic acid, formaldehyde and sodium salt. Acts as a dispersant and emulsifier. It is a water-soluble powder with color of sand... view more

Polymerized gum rosin with low odor, dark color and high softening point can partially substitute maleic resins. Offers some advantages due to its high solution viscosity. Found to be completely... view more

Titanium dioxide(>98.5%). It is a white colored masterbatch. Exhibits stable chemical quality, excellent optical properties, purity and good whiteness. Also exhibits strong hiding power, high color... view more

Titanium dioxide(>98.5%). It is a white colored masterbatch. Exhibits whitening, brightness, excellent optical property and hiding-power. Used in professional grade coatings... view more

Zinc stearate. Acts as a lubricant. It is derived from natural and renewable feedstocks. Suitable for use in paints, lacquers and industrial coatings... view more

Synthetic, precipitated silica thixotrope. Used as a rheology modifier in solvent based coatings, polyester gel coats and inks. Offers high oil absorption... view more

Low dusting, synthetic, precipitated silica thixotrope. Used as a rheology modifier and an anti-sag/suspension aid in solvent based coatings, polyester gel coats, and inks... view more

Synthetic, precipitated silica thixotrope. Used as a rheology modifier and an anti-sag/suspension aid in solvent based coatings, polyester gel coats and inks... view more

Synthetic, precipitated silica thixotrope. Used as a rheology modifier and an anti-sag/suspension aid in solvent based coatings, polyester gel coats and inks. Possesses high surface area... view more

Synthetic amorphous silica. Used as a matting agent which finds wide acceptance in the matting of inks, paints, paper coatings and ink adsorbing pigment for inkjet coatings... view more

Synthetic amorphous silica. High efficiency, easy dispersible matting agent which provides a low sheen to gloss ratio. Suitable for matting of high solids and acid catalysed coil systems. Ink... view more

Synthetic amorphous silica. Acts as a matting agent suitable for wood finishes and general industrial coatings with very good performances in 100% UV curable formulations... view more

An inorganic treated silica-gel. Acts as an effective matting agent. Has minimal effect on viscosity. Offers product consistency and film clarity. Used for general industrial and other surface... view more

Silcron® G-130. by PQ Corporation is a synthetic amorphous silica. Acts as an inorganic surface treated general purpose matting agent for industrial coatings and printing inks, free-flow agent for powder... view more

Solid Ultrafine glass microspheres... view more

Prizmalite® P2015SL by PRIZMALITE Industries is solid glass microspheres... view more

Solid glass microspheres made from barium titanate glass... view more

Solid glass microspheres... view more

Dodecanedioic Acid by Palmary Chemical is a family of organic compounds with a chemical formula of HOOC(CH2)10COOH. It is known as 'long-chain dicarboxylic acid' when the total carbon number is... view more

MixAcid MA2 by Palmary Chemical is a mixture of dibasic organic acids such as sebacic-, undecanedioic- and dodecanedioic acids. It is over 98% long-chain dibasic acid. It has very good corrosion... view more

Mixacid MA1 by Palmary Chemical is a mixture of dibasic organic acids such as sebacic-, undecanedioic- and dodecanedioic acids. It is used as a corrosion inhibitor in metalworking fluids and cooling... view more

Undecanedioic Acid by Palmary Chemical belongs to a family of organic compounds with a chemical formula of HOOC(CH2)9COOH. It is also known as 'long-chain dicarboxylic acid' when the total carbon... view more

Einar® 501 by Palsgaard is a fine-sprayed distilled GMS that serves as an anti-stat when coated on EPS beads. The fine powder will efficiently cover the surface of the beads and provide anti-static... view more

Einar® 511 by Palsgaard is a fine sprayed plant-based GTS that serves as a cooling time enhancer when coated on EPS beads. The fine powder will efficiently cover the surface of the beads and... view more

Einar® 543 by Palsgaard is an all-in-one fine-sprayed GMS, GTS and zinc stearate blend that serves as both an anti-stat, a cooling time enhancer and lubricant when coated on EPS beads. The fine... view more

Einar® 544 by Palsgaard is an all-in-one fine-sprayed GMS, GTS and zinc stearate blend that serves as both an anti-stat, a cooling time enhancer and lubricant when coated on EPS beads. The fine... view more

Monoazo. It is an organic red pigment. Used for enamels, printing inks and textile printing applications... view more

Phthalocyanine. It is an organic blue pigment powder. Used for enamels, printing inks and textile printing applications... view more

Phthalocyanine. It is an organic blue pigment powder. Used for enamels, printing inks and textile printing applications... view more

Phthalocyanine. It is an organic blue pigment powder. Used for enamels, printing inks and textile printing applications... view more

Monoazo. It is an organic pigment powder. Used for enamels, printing inks and textile printing applications... view more

Effective synergist for conjunction between pigment and polymeric dispersant. Improves the pigment dispersion and stability in liquid organic media. The product is seldom used alone, but typically... view more

Effective synergist for conjunction between pigment and polymeric dispersant. Improves the pigment dispersion and stability in liquid organic media. The product is seldom used alone, but typically... view more

Cuprous Oxide by Perrychem is an anti-fouling agent. It is manufactured by electrolysis method and behave as a semiconductor. The biological property of copper compounds takes important role as... view more

Bis-MPA™ by Perstorp is trifunctional compound of neopentyl structure containing two primary hydroxyl groups and one tertiary carboxyl group. It only requires small amounts to create stable... view more

Charmor™ DP40 is micronized dipentaerythritol derivative by Perstorp. Used in intumescent coatings. It is a carbon source for halogen free systems demanding lower smoke release and non-toxic fumes... view more

Charmor™ PM15 by Perstorp is a super micronized pentaerythritol derivative. Used as a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures... view more

Charmor™ PM40 by Perstorp is polyhydric alcohol containing four primary hydroxyl groups. Used in intumescent systems for coating... view more

Charmor™ PM40 Care by Perstorp is polyhydric alcohol containing four primary hydroxyl groups. It is partly based on renewable raw material. Derived from the Voxtar™ platform. It reduces carbon... view more

It acts as an anti-floating, anti-flooding, flow & leveling agent. Helps prevent silking in a wide variety of solvent-based systems and eliminates flooding and floating problems when added to the... view more

It acts as a flow and leveling agent. Designed to promote the control of orange peel and other surface defects in powder coatings. It is compatible with a wide variety of resins & other materials... view more

ACROLITE® Fast Bordeaux PRRC by Pidilite Industries Ltd. is a deep, bright bordeaux red organic pigment mainly designed for air drying paints. It is available in powder form. It is suitable for... view more

ACROLITE® Fast Carmine PRC by Pidilite Industries Ltd. is a medium bluish Naphthol AS red organic pigment. It offers good dispersibility, strength and rheology properties. Recommended for pigment... view more

ACROLITE® Fast Carmine PRCL by Pidilite Industries Ltd. is a medium bluish Naphthol AS red pigment with good dispersibility, strength and rheology properties. It is suitable for water-based, NC... view more

ACROLITE® Fast Carmine PRCU by Pidilite Industries Ltd. is a medium bluish Naphthol AS red pigment. It exhibits good dispersibility, strength and rheology properties. Recommended for UV curing... view more

ACROLITE® Fast HP Red 190 by Pidilite Industries Ltd. is an opaque, yellowish mass tone red, high-performance pigment. Recommended for artist color/colorant, decorative-, industrial- and automotive... view more