SR 495B by Sartomer Arkema Group is caprolactone acrylate. It is a low volatility and low odor monofunctional monomer. It causes low dermal irritation. Offers good chemical resistance. It provides... view more

Ethoxylated trimethylolpropane triacrylate. Is a fast curing monomer. It causes low dermal irritation. Offers chemical-, water-, heat- and abrasion resistance. It provides adhesion, low shrinkage... view more

Propoxylated trimethylolpropane triacrylate. Is a fast curing monomer. It causes low dermal irritation. Offers chemical-, water- and abrasion resistance. It provides adhesion, low shrinkage, impact... view more

Isobornyl acrylate. is an excellent reactive diluent for oligomers. The cyclic group offers high glass transition temperature. It offers good adhesion, good hardness, weatherability, high... view more

Cyclic trimethylolpropane formal acrylate. It has good toughness and non-yellowing properties. It provides adhesion, low shrinkage and weatherability. Used in wood coatings and in inks. Complies... view more

ALFONIC 1012-5 Ethoxylate by Sasol is a biodegradable, 100% active, non-ionic emulsifier derived from ethoxylated C10- C16 alcohol. It is soluble in polar solvents such as water, ethanol... view more

ALFONIC 1012-6 Ethoxylate by Sasol is a biodegradable, 100% active, non-ionic emulsifier derived from ethoxylated C10-C16 alcohol. ALFONIC 1012-6 Ethoxylate is designed for coatings. It is soluble... view more

ALFOTERRA 123-8S 90 by Sasol is an anionic surfactant. It is the sodium salt of ISALCHEM 123 fatty alcohol propoxy-sulfate with about 85% active matter. It is suitable for paints, inks and coatings... view more

ALFOTERRA 145-8S 90 by Sasol is an anionic surfactant. It is the sodium salt of ISALCHEM 145 fatty alcohol propoxy-sulphate with about 85% active matter. It is used in paints, inks and coatings... view more

ISOFOL 12 Alcohol by Sasol is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-butyl-1-octanol and is also referred to as C12 Guerbet... view more

Modified phenol derivative and methyle ethyle ketoxime (Meko) in solvent mixture. Acts as a viscosity stabilizer with good wetting and dispersing properties for solvent based and water borne coating... view more

ANTIGEL® 6217 by Schwegmann is a mixture of surface active agents with antioxidant, free of oxime. It is a multifunctional additive with good wetting and dispersing properties for solvent borne and... view more

Antioxidant with additives in solvent mixture. Acts as a viscosity stabilizer with good wetting and dispersing properties especially for high-solid coating systems, free of ketoxime and aromates. Is... view more

Antioxidant with additives in solvent mixture. Acts as a viscosity stabilizer with good wetting and dispersing properties especially for high-solid coating systems, free of ketoxime and aromates. Is... view more

Silicone free, polymer in solvents mixture. Acts as a defoaming and deaerating agent. In most cases it also improves the leveling. Used in solvent based and water borne systems. In solvent based... view more

Texipol® 63-201 is an easy to use, low viscosity, anionic inverse emulsion thickener by Scott Bader. Imparts a stringy and mildly pseudoplastic rheology to aqueous-based compositions. It does not... view more

Texipol® 63-202 by Scott Bader is an anionic inverse emulsion, easy to use, low viscosity thickener for coating formulations. It is supplied as a pre-neutralised dispersion as the sodium salt of an... view more

Texipol® 63-237 by Scott Bader is an easy to use, anionic, low viscosity, multifunctional inverse emulsion thickener developed specifically for the pigment printing of textiles. It does not require... view more

Inverse emulsion thickener. Used to thicken anionic bituminous systems, shoe creams and textured coatings... view more

Texipol® 63-259 by Scott Bader is an anionic, low viscosity, APEO- and California Prop 65-free inverse emulsion rheology modifier. Provides instantaneous thickening in water-based bitumenous and... view more

SENSIJET® Black SDP100 by Sensient Technologies is a self-dispersed pigment. Delivers narrow particle size distribution and high charge density, providing high stability, optical density, and image... view more

SENSIJET® Black SDP1000 by Sensient Technologies is a self-dispersed pigment. Delivers narrow particle size distribution and high charge density, providing high stability, optical density, and image... view more

1, 2-Diaminocyclohexane (DACH), di-amine by Seqens is epoxy curing agent. It offers enhanced film hardness to promote high chemical and physical resistance properties in subsequent coatings. It shows excellent resistance to... view more

2-Ethylhexyl Acetate (Chemoxy) by Seqens is clear, low volatile 2-ethylhexyl acetate. It is a non-HAP, non-SARA, partially biodegradable non-polar solvent. It exhibits low surface tension, high boiling point and low... view more

Coasol® by Seqens is a non-HAPS, low-odor, di-isobutyl glutarate and di-isobutyl based coalescent. It is recommended for water-based architectural paints. It is used in fusion of the polymer... view more

Coasol® 290 Plus by Seqens is a low odor, coalescing solvent. It exhibits high boiling point, improved open time and minimal water solubility that improve portioning performance. It offers improved... view more

Di-n-Butyl Ether by Seqens is di-n-butyl ether. It is recommended as a solvent for CD-R coating manufacture. It is a good solvent for oils, fats and natural & synthetic resins. It exhibits high flash... view more

Thermosetting acrylic resin. It exhibits heat resistance. Used in water-base O.C. varnish and printing ink... view more

Hydroxyl terminated polyurethane resin. Used in printing inks for plastic and metals application... view more

Hydroxyl terminated polyurethane resin. Used in printing inks for plastic and metals application... view more

Hydroxyl terminated polyurethane. It exhibits excellent lamination strength, adhesion and running properties. Used along with nitrocellulose in gravure & flexographic inks for both polyester and... view more

Polyurethane polymer. It exhibits excellent lamination strength, adhesion and running properties. Used in gravure & flexographic inks for both Polyester and BOPP films... view more

AquaFLON® 52 by Shamrock is a non-ionic aqueous dispersion of polytetrafluoroethylene (PTFE). Acts as a slip control, rub- and abrasion resistance agent. Provides high temperature resistance, broad... view more

Hydrophobic additive. Control water pickup in inks. Used in lithographic inks... view more

Aquapel Three by Shamrock Technologies acts as a water repellent. It increases color strength and improves overall print quality. It ensures a stable ink in water balance especially for the long runs on high-speed... view more

Dispersion of micronized polytetrafluoroethylene in a universal lithographic system. Provides very good slip properties. Used in heat-set lithographic inks... view more

Aqueous wax microdispersion. Improves the slip and wet rub resistance properties... view more

Chlorinated paraffin. Acts as a plasticizer and as a flame retardant. Used in oil paints and marine coatings... view more

Diethylene glycol dibenzoate(DEDB). Acts as a plasticizer. It has good heat stability, plasticized capacity, resistance to freeze, electrical properties and UV filtering properties. It is... view more

Dipropylene glycol dibenzoate (DPGDB). Acts as a plasticizer. It reduces the melting temperature and production time. It is resistant to mineral oil and has high flash point... view more

3-Methoxy-2, 2, 3, 3 – tetrafluoromethyl propionate (MTPME). Used as a solvent. It is an important and special fluorinated, fine industrial chemical. Colorless and clear liquid with aroma. It is... view more

3-Methoxy-2, 2, 3, 3 – tetrafluoromethyl propionate (MTPME). It is an important and special fluorinated, fine industrial chemical. Colorless and clear liquid with aroma. It is inflammable and... view more

Fluorinated ethylene-propylene concentrated dispersion. It is copolymerized by tetrafluoroethylene and hexafluoropropylene. The aqueous dispersion is stabilized by non-ionic surfactant, and can... view more

Fluorinated ethylene-propylene concentrated dispersion. It is copolymerized by tetrafluoroethylene and hexafluoropropylene. The aqueous dispersion is stabilized by non-ionic surfactant, and can... view more

EPOXY RESIN HJ8132 by Shandong Huijin Chemical is a low viscosity, 100% reactive, bisphenol A-based epoxy resin diluted with an alkyl glycidyl ether. It provides minimum odor and good color. EPOXY... view more

EPOXY RESIN HJ828 by Shandong Huijin Chemical is an undiluted, clear, difunctional bisphenol A/epichlorohydrin derived epoxy resin. It offers very good mechanical, dielectric and chemical... view more

Dimer acid, based on rectified cotton oleic acid and soybean oleic acid. It is a conventional dimer acid. It is non-toxic and non-volatile. Offers good liquidity, high flash point and fire point. It... view more

Dimer acid, based on rectified cotton oleic acid and soybean oleic acid. It is a high-purity dimer acid. It is non-toxic and non-volatile. Offers light color, good liquidity, high flash point and... view more

Dimer acid, based on rectified cotton oleic acid and soybean oleic acid. It is a conventional dimer acid. It is non-toxic and non-volatile. Offers good liquidity, high flash point and fire point. It... view more

LC3415 by Shandong Lecron New Materials is an ethylene glycol (EG) and diethylene glycol (DEG) based polyester polyol. It is available in liquid in room temperature and solid in winter. LC3415... view more

LC3418 by Shandong Lecron New Materials is an ethylene glycol (EG) and diethylene glycol (DEG) based polyester polyol. It possesses wear resistance, hard fold, tear resistance, low density and high... view more

LC3420 by Shandong Lecron New Materials is an ethylene glycol (EG) and diethylene glycol (DEG) based polyester polyol. It exhibits low density, wear resistance, hard fold and high mechanical... view more

LC3618 by Shandong Lecron New Materials is an ethylene glycol (EG) and butylene glycol (BG) based polyester polyol. It exhibits good wear resistance, hard fold, solvent resistance, hydrolysis... view more

LC3620 by Shandong Lecron New Materials is an ethylene glycol (EG) and butylene glycol) based polyester polyol. It is available in liquid in room temperature and solid in winter. It exhibits good... view more

Optical Brightener BA Liquid (two sulfur) by Shandong Raytop Chemical is a brightening agent. It is a transparent liquid. Optical Brightener BA Liquid (two sulfur) is designed to make fluorescence... view more

Optical Brightener PC 2 by Shandong Subang Fluorescence Technology is a brightening agent. It possesses good stability, purity, weatherability and migration resistance. Optical Brightener PC 2 is... view more

Optical Brightener PC 6 by Shandong Subang Fluorescence Technology is a brightening agent used in pigment coatings. It exhibits good stability, purity and weatherability. It provides high affinity... view more

Optical Brightener ST-II by Shandong Subang Fluorescence Technology is an eco-friendly whitening and brightening agent. It exhibits good stability, purity, weatherability and migration resistance... view more

Bis-(Gamma-triethoxysilylpropyl)-tetrasulfide(Si-69,A-1289) by [supplier} acts as a coupling agent. Recommended for coating applications... view more

Bis[ Gamma-(triethoxysilyl)propyl]disulfide(Si-75) by Shandong Xinlong is a silane coupling agent. Recommended for coating applications... view more

Allyl acetoacetate by Shanghai Deborn is an adhesion promoter. It is available in colorless to pale yellow colored liquid form. Allyl acetoacetate is recommended for coatings... view more

Hydroxyethyl methacrylate (HEMA) by Shanghai Deborn is used in di-isocyanate and melamino-formaldehyde resin for the production of two component coatings. Hydroxyethyl methacrylate (HEMA) also finds... view more

Hydroxyethyl methacrylate (HEMA) (Premium Grade) by Shanghai Deborn is used in di-isocyanate and melamino-formaldehyde resin for the production of two component coatings. Hydroxyethyl methacrylate... view more

LS-123 by Shanghai Deborn is a highly effective light stabilizer. It offers a wide range of polymerization. LS-123 is suitable in automotive-, industrial-, decorative paints-, wood stains and over... view more

LS-292 by Shanghai Deborn is a light stabilizer. LS-292 is used in radiation curable-, automotive-, coil-, wood stains-, do-it-yourself coatings and paints. Its high efficiency has been demonstrated... view more