High acid value polyester. Used for tile-like wall coatings and floor finishes, transportation equipment finishes, implement & tool finishes, marine finishes, and factory-finished paneling. Offers... view more

Chemically-modified, linseed oil supplied in butoxy ethanol. Contains no water as supplied, but can be diluted with water without the addition of a neutralizer. Used in opaque and semi-transparent... view more

Water-dispersible alkyd. Shows good corrosion resistance, good air-dry rate, very good humidity and water resistance. Used in air-dry or force-dry primers and topcoats, spray, dip and flowcoat... view more

KELSOL® 3907-B2G2-75 by Reichhold (Polynt) is a fast-drying, water-dispersible, HAPs-free alkyd resin. It exhibits excellent stability, humidity & corrosion resistance. Additional co-solvent is... view more

Water-reducible alkyd. Shows very good corrosion resistance ad fast dry. Used in dip and flowcoat enamels where higher film build is required and spray applications requiring fewer passes with the... view more

Alcupol C-2831 by Repsol is a reactive trifunctional polyether with a high molecular weight, finished with ethylene oxide. Alcupol C-2831 is used for polyurethane surface coatings and varnishes... view more

Alcupol C-3531 by Repsol is a high molecular weight, reactive trifunctional polyether. Alcupol C-3531 is designed for polyurethane surface coatings and varnishes... view more

Alcupol C-3810 is a non-reactive trifunctional polyether by Repsol. Alcupol C-3810 is used in polyurethane surface coatings and varnishes... view more

Alcupol C-4811 by Repsol is a reactive, BHT-free trifunctional polyether. Alcupol C-4811 is used for polyurethane surface coatings and varnishes... view more

Alcupol C-5521 by Repsol is a reactive trifunctional polyol ether capped with ethylene oxide. Alcupol C-5521 is used in the manufacture of surface coatings... view more

Aqueous solution of zinc acrylate. Dymalink® 664 by Resin Solutions enhances the performance of aqueous coatings. It can be incorporated into water-based resins and cure activated water-soluble peroxides... view more

Wingtack® 20 by Resin Solutions is a viscous, aliphatic C-5 hydrocarbon resin. It exhibits high flash point, low color & odor, low glass transition temperature, low product volatility and reduced residuals... view more

Wingtack® ET Molten by Resin Solutions is a light yellow, economical, aromatically modified C-5 hydrocarbon grade. Shows increased tack and excellent peel- and cohesive strength properties. Possesses exceptionally... view more

Modified rosin. Used in inks... view more

Hydrocarbon modified rosin ester. Used in coatings... view more

Rosin ester. Used as tackifier for coatings... view more

Aromatic hydrocarbon resin. Used in coatings... view more

Aromatic hydrocarbon resin. Used in coatings and inks... view more

Resinate® A2551-100 by Resinate Materials Group is a developmental polyol made with 99.9% recycled and renewable content. Exhibits long pot life, low viscosity, excellent- water, chemical, high... view more

Resinate® A2552-100 by Resinate Materials Group is a developmental polyol. Exhibits low viscosity and good chemical resistance. Offers superior adhesion performance on plastic and metal substrates... view more

Resinate® A2553-76 by Resinate Materials Group is a developmental polyol. Exhibits low viscosity and excellent water- & chemical resistance. Offers excellent adhesion performance on a variety of... view more

Resinate® C1051-60 (BA80) [Formerly IMP1000-16.2] by Resinate Materials Group is an aromatic polyester polyol with 60% recycled and renewable content on a solids basis. It is supplied at 80% solids... view more

Resinate® C1181-100 by Resinate Materials Group is an aromatic polyester polyol with 99.9% recycled and renewable content. Exhibits ideal balance of hardness and flexibility as well as good water... view more

Polyfam® 103 by Resinfam is an acid-containing, crosslinked acrylic emulsion copolymer. It forms viscous solution at low concentration upon neutralization with a base. It is used as a thickener in... view more

Polyfam® PR587L by Resinfam is a self-cross-linking acrylic emulsion. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by salt spray resistance standard... view more

Replacol® 277 by Resins & Plastics is a butylated phenolic resin. It exhibits high chemical- and abrasion resistance. It is suitable for one pack hot curing epoxy-based coatings for cans and... view more

Replacol® 279 by Resins & Plastics is butylated phenolic resin. It exhibits high chemical- and abrasion resistance properties. It is suitable for one pack hot curing epoxy-based coatings for cans... view more

HPC-2200 by Resonac (formerly Showa Denko) is NMP-free, polyamide imide resin with low toxicity. It can form the film having high insulation and solvent resistance. This product possesses high heat resistance and... view more

HPC-3010A by Resonac (formerly Showa Denko) is NMP-free, polyamide imide resin with low toxicity. It possesses high heat resistance and coating hardness. It can form the film having high insulation and solvent... view more

HPC-5012 by Resonac (formerly Showa Denko) is a polyamide-imide resin with low toxicity. This product possesses high heat resistance and coating hardness. It can be diluted by adding organic solvent for solvent-based... view more

HPC-6600 by Resonac (formerly Showa Denko) is NMP-free, polyamide imide resin. It possesses high heat resistance, low toxicity and coating hardness. It can be diluted by adding organic solvent for solvent-based... view more

AOI-VM™ by Resonac (formerly Showa Denko) is dicyclopentanyl methacrylate monomer. It possesses hardness, hydrophobic properties, high glass transition temperature (Tg), good reducibility and good adhesiveness. This... view more

Resyflex K-10 by Resypar Indústria e Comércio is monomeric plasticizer derived from renewable vegetable raw material and absolutely free of phthalic derivatives in its composition. It presents high solvation and is... view more

Monomeric primary plasticizer derived from renewable vegetable raw material and absolutely free of phthalic derivatives in its composition. Has moderate solvation and is recommended to several... view more

REVOSOLV F1 by RevoSolv is a low viscosity, highly efficient, DMSO-based solvent. It possesses powerful solvency and low evaporation rate. It is fully miscible in water. This additive shows... view more

REVOSOLV F1-MP20 by RevoSolv is a low viscosity, highly efficient, DMSO-based solvent. It shows compatibility with acrylic, epoxy, saturated polyester, cellulose acetates, polyether/polyester... view more

REVOSOLV F2 by RevoSolv is a low viscosity, highly efficient, DMSO-based solvent. It possesses powerful solvency and moderate evaporation rate. It is an effective alternative to ketones, NMP... view more

REVOSOLV F2-AT by RevoSolv is a low viscosity, highly efficient, DMSO-based solvent with low polarity. It possesses low water content, powerful solvency and moderate evaporation rate. This additive... view more

REVOSOLV F3 by RevoSolv is a low viscosity, highly efficient, DMSO-based solvent. It is used in paints. This additive is an effective alternative to chlorinated solvents, ketones, solvents with high... view more

RIANOX® 1135R by Rianlon acts as a polymerization inhibitor. It is recommended for coating applications. It has a good anti-polymerization effect on olefin substances and derivatives like acrylate... view more

RIANOX® 1520 by Rianlon acts as a polymerization inhibitor. It is recommended for coating applications. It has a good anti-polymerization effect on olefin substances and derivatives like acrylate... view more

RIANOX® 1726 by Rianlon acts as a polymerization inhibitor. It is recommended for coating applications. It has a good anti-polymerization effect on olefin substances and derivatives like acrylate... view more

RIANOX® 5057 by Rianlon acts as a polymerization inhibitor. It is recommended for coating applications. It has a good anti-polymerization effect on olefin substances and derivatives like acrylate... view more

RIANOX® TNPP by Rianlon acts as a polymerization inhibitor. It is recommended for coating applications. It has a good anti-polymerization effect on olefin substances and derivatives like acrylate... view more

RC - 60 by Riddhi Chemicals acts as an emulsifier and dispersing agent. It is suitable for water-based systems and emulsion polymer applications. Recommended dosage level is 0.25 – 1.00%... view more

RC - 85 by Riddhi Chemicals acts as an emulsifier and wetting agent. It is suitable for high gloss paints & ink applications. Recommended dosage level is 0.25 – 0.80%... view more

RC MIX by Riddhi Chemicals acts as an alkyd emulsifier. It is a multi purpose additive for aquamix, stainers and OBD applications. Recommended dosage level is 0.5 – 1.00%... view more

RC – ALK by Riddhi Chemicals acts as an emulsifier and wetting agent. It is suitable for bound distempers, acrylic distempers, universal & water strainers and acrylic & PVA emulsion paints... view more

RC – EDA by Riddhi Chemicals acts as an emulsifier and dispersing agent. It is suitable for all types of enamels and cement paint applications. Recommended dosage level is 0.25 – 0.75%... view more

RIMPRO DA-10 by Rimpro India is a decyl alcohol ethoxylate. Acts as an emulsifier. It is a clear colorless liquid. RIMPRO DA-10 is having carbon length 10. It can be used in paints... view more

RIMPRO DA-5 is a decyl alcohol ethoxylate. Acts as an emulsifier. It is a clear colorless liquid. RIMPRO DA-5 is having carbon length 10. It can be used in paints... view more

RIMPRO DA-6 by Rimpro India is a decyl alcohol ethoxylate. Acts as an emulsifier. It is a clear colorless liquid. RIMPRO DA-6 is having carbon length 10. It can be used in paints... view more

RIMPRO DA-6.5 by Rimpro India is a decyl alcohol ethoxylate. Acts as an emulsifier. It is a clear colorless liquid. RIMPRO DA-6.5 is having carbon length 10. It can be used in paints... view more

RIMPRO DA-7 by Rimpro India is a decyl alcohol ethoxylate. Acts as an emulsifier. It is a clear colorless liquid. RIMPRO DA-7 is having carbon length 10. It can be used in paints... view more

Non-toxic, chlorinated paraffin. Used as a plasticizer for flexibility and plasticizing additive to compatible binders and resins in the manufacture of paints and other coating compositions. Offers... view more

Non-toxic, chlorinated paraffin. Used as a plasticizer for flexibility and plasticizing additive to compatible binders and resins in the manufacture of paints and other coating compositions. Offers... view more

MERACRYL® n-BMA (Formerly VISIOMER® n-BMA) by Roehm is n-butyl methacrylate. It provides flexibility to polymers due to its softening temperature. It has a shelf life of 6 months. MERACRYL®... view more

POLYSORB® LP by Roquette is a high purity, recyclable, bio-based isosorbide available in liquid form. Offers enhanced optical properties, temperature resistance, UV resistance and surface hardness... view more

POLYSORB® ID by Roquette Isosorbide is a phthalate-free, 100% bio-based isosorbide diester for coatings. Acts as a general-purpose plasticizer. It is a blend of diesters obtained from esterification... view more

Polyisobutylene. It exhibits medium molecular weight. Supplied in the form of transparent clear to slightly cloudy liquid or semisolid. Used in coatings... view more

Polyisobutylene. It exhibits medium molecular weight. Supplied in the form of transparent clear to slightly cloudy liquid or semisolid. Used in coatings... view more

Polyisobutylene. It exhibits medium molecular weight. Supplied in the form of transparent clear to slightly cloudy liquid or semisolid. Used in coatings... view more

Polyisobutylene. It exhibits medium molecular weight. Supplied in the form of transparent clear to slightly cloudy liquid or semisolid. Used in coatings... view more

Polyisobutylene. It exhibits medium molecular weight. Supplied in the form of transparent clear to slightly cloudy liquid or semisolid. Used in coatings... view more

Acrylic ester dispersion. Has flexible and sticky film. Suitable for base or multicoats. Possesses good washing resistance. Used in paste or foam coatings... view more

Acrylic ester dispersion. Produces a hard film. Suitable for top or multicoats. Possesses resistance to washing and dry cleaning. Used in paste or foam coatings... view more

Glycol ether. Is a rheology modifier. Modifies the flow properties/behaviour of coating pastes and reduces roller build-up from binder systems in the padding process. Used in coatings and padding... view more

RUCO-COAT AD 7055 by Rudolf Group is polyacrylamide. Is a rheology modifier. Modifies the flow properties/behaviour of coating pastes and improves the levelness in the padding process when combined with... view more

RUCO-COAT AD 7070 by Rudolf Group is a modified polyether. Is a rheology modifier. Modifies the flow properties/behaviour of coating pastes and reduces the penetration of coating pastes into the substrate... view more

Mixture of bis(2,2,6,6-tetramethyl-4-piperidine)sebacate and methyl(2,2,6,6-tetramethyl-4-piperidine)sebacate. Acts as a UV absorber. It is a slightly yellow liquid with 508.75 molecular weight... view more

Methyl benzoyl formate. Acts as a photoinitiator. It is a clear slight yellow liquid with 164.16 molecular weight. Used in UV-curing inks and coatings... view more

2-Ethylhexyl 4-dimethylaminobenzoate. Acts as a photoinitiator. It is a clear slight yellow liquid. Used in UV-curing inks and coatings... view more

1-Hydroxy-2-methylpheny-propane-1-one. Acts as a photoinitiator. It is a colorless or slightly yellow liquid with 164.2 molecular weight... view more

KS No.1 by S-Chemtech is a sodium silicate grade. Also called as water glass. Exhibits properties of silica gel in presence of excess water (if amount of alkali decreases) and properties of sodium... view more

KS No.2 by S-Chemtech is a sodium silicate grade. Also called as water glass. Exhibits properties of silica gel in presence of excess water (if amount of alkali decreases) and properties of sodium... view more

KS No.3 by S-Chemtech is a sodium silicate grade. Also called as water glass. Exhibits properties of silica gel in presence of excess water (if amount of alkali decreases) and properties of sodium... view more

KS No.4 by S-Chemtech is a sodium silicate grade. Also called as water glass. Exhibits properties of silica gel in presence of excess water (if amount of alkali decreases) and properties of sodium... view more

POSIL 15 by S-Chemtech is a potassium silicate grade. Acts as a filler. Exhibits very good heat resistance and whitening resistance. It is colorless transparent liquid. Used in inorganic paints... view more

1,3,5-cyclohexatriene. It contains no free acid. It is the starting point for many derivatives required in the production of a wide range of goods. Benzene and ethylene are used to produce styrene... view more

Decene-1 (C10). It is a colorless liquid. Used in the production of polyalphaolefins, polyol ester, plasticizer alcohols, epoxides and other derivatives... view more

Octene-1 (C8). It is a colorless liquid. It can be used as a co-monomer in the production of low-density polyethylene as well as in the production of plasticizer alcohols and other derivatives... view more

1,4-Dimethylbenzene. It is a colorless, flammable liquid. It is separated from the mixed xylene stream that results from the refining of petroleum. Mostly used in manufacturing of terephthalic acid... view more

SABIC® STYRENE MONOMER (SM) by SABIC is a colorless to yellowish styrene monomer with a distinctive aromatic odor. It has a low vapor pressure and high refractive index. It is chemically reactive... view more

Adhesion promoter. Used for PVC-plastisols on cathodic dip coatings... view more

Very efficient adhesion promoter. Used for PVC-plastisols on cathodic dip coatings... view more

Reactive hardener. Used for acceleration of solvent-based and solvent free coatings. offers very good compatibility with amine hardeners... view more

Accelerated phenol-free mannich base. Used as an accelerator for epoxy resins in paints. Offers low temperature curing. Contains no nonylphenol and benzyl alcohol... view more

Phenol-free mannich base. Used as an accelerator for epoxy resins in paints. Offers low temperature curing. Contains no nonylphenol and benzyl alcohol... view more