PRIMAL™ EC-1791QSE by Dow is a surface curing polymer designed for use in horizontal mastic applications. Shows outstanding exterior durability and UV resistance.Exhibits fast film curing, early... view more

APEO and CMIT-free, acrylic binder designed for low VOC, sheen to high gloss wall and trim paints. Can be formulated with chelates to get thixotropy... view more

PRIMAL™ EP-6060 is an acrylic dispersion designed for factory applied, interior water-based acrylic wood finishes. The wet and dry clarity of clear films is outstanding especially over light wood... view more

PRIMAL™ FGR by Dow Chemical is a water-soluble acrylic polymer emulsion. Provides very good penetration characteristics on full-grain leathers. It is intended as an impregnation resin to improve the... view more

Acrylic hybrid binder. Used for interior and exterior paints. Offers high gloss potential. Provides very good applicability, flow and leveling and open time. Exhibits low yellowing characteristics... view more

Silicon free acrylic modified polyester. Shows strong foam prevention effect and reduces craters and pinholes. Used in wood coatings and general industrial coatings... view more

Silicon free acrylic modified polyester. Carboxylic polymer intended for in situ amine neutralisation. Used in water borne wood and furniture coatings, industrial coatings, automotive top coats and... view more

Silicon free acrylic modified polyester intended for in situ amine neutralization. Reduces orange peel, craters and pinholes. Used in water borne wood and furniture coatings, industrial coatings... view more

EPS® 2210 by EPS is an acrylic emulsion designed for use in elastomeric roof and wall coatings. It provides weatherability, excellent asphalt bleed-through, dirt pickup resistance and... view more

PC-Mull® 815 by EPS is a clear in can, biobased, self-crosslinking all-acrylic polymer. It is designed to meet high chemical resistance and provide block resistance, ensuring there is not risk... view more

Epoxy ester resin based on coconut fatty acid. Possesses very good adhesion and flexibility, good yellowing resistance, and good hardness. Used for can coatings and non yellowing overprint varnish... view more

Epoxy ester resin based on dehydrated castor oil fatty acid. Possesses very good adhesion and flexibility, good chemical resistance, and very good mechanical properties. Used for applications like... view more

Epoxy ester resin based on dehydrated castor oil fatty acid. Possesses very good adhesion and flexibility, good chemical resistance, and very good mechanical properties. Used for applications like... view more

RMA-EAGLE (LTUX34-80/60)60% by Eagle Chemicals is phenolic/rosin modified short oil alkyd resin based on linseed/tung oil. It offers fast drying time, good adhesion, good corrosion resistance and water resistance... view more

RMA-EAGLE (VTUX31-25/50)50% by Eagle Chemicals is phenolic/rosin modified short oil alkyd resin based on vegetable/tung oil. Possesses good adhesion, and recoatability. Exhibits fast drying time. RMA-EAGLE (VTUX31-25/50)50% is used for... view more

Eastman Tetrashield™ AC1000 by Eastman is a durable polyester resin system designed for automotive OEM clearcoats and pigmented topcoats. It enhances coating performance, reduces environmental... view more

Eastman Tetrashield™ AC1001 by Eastman is a durable polyester resin system designed for automotive OEM clearcoats and pigmented topcoats. Imparts enhanced long term weathering performance, extended... view more

Eastman Tetrashield™ IC3000 by Eastman is a durable polyester resin system that improves the performance of both clearcoats and pigmented topcoats. It offers enhanced coating performance, reduces... view more

Eastman Tetrashield™ IC3020 by Eastman is a high performance polyester protective resin. Offers enhanced long term weathering performance and durability due to increased hydrolytic stability. Shows... view more

Solution of a chlorinated polyolefin in xylene. Used as additive for paint, coatings, coatings for plastic, laminating adhesives, printing inks. Possesses very good heat stability... view more

Solkem 1002 by Ecoat is a solvent-free, long-oil drying alkyd based on linoleic rich fatty acid. It offers low viscosity, high solid, hydrolysis resistance, good brushability, outdoor durability and... view more

Solkem 1003 by Ecoat is a long-oil drying alkyd based on linoleic rich fatty acid. It provides quick drying, low viscosity, good yellowing, good brushability, outdoor durability and gloss level... view more

Solkem 1004 by Ecoat is a long-oil drying alkyd based on linoleic rich fatty acid. It offers good brushability, outdoor durability and gloss level. It provides quick drying, very limited yellowing... view more

Solkem 1028 by Ecoat is a short-oil drying alkyd based on linoleic fatty acid. It can be blended with nitrocellulose, melamine formaldehyde, urea formaldehyde and isocyanate. Solkem 1028 can be used... view more

Solkem 3840 by Ecoat is a short oil hydroxyl and water dispersible alkyd resin. It shows fast drying, very good adhesion, excellent corrosion resistance and very good water resistance. It is... view more

ECOPOLBUILD 1 by Ecopol Tech is an anionic aqueous hybrid polyurethane-silane dispersion at 30% solid content. Exhibits water repellent properties, thus provides good moisture resistance when applied and... view more

ECOPOLBUILD 3 by Ecopol Tech is a cationic aqueous hybrid polyurethane-silane dispersion at 30% solid content. Exhibits water repellent properties, thus provides good moisture resistance when applied and... view more

ECOPOLCOAT CCR 30-F by Ecopol Tech is a self-crosslinking anionic aqueous poluyrethane dispersion at 30% solid content, intended for coating textiles with high hydrolytic stability. After curing, it exhibits... view more

Hypomer AC-7435 by Elementis is a thermoplastic acrylic resin. It offers fast drying, good adhesion to plastics and good orientation of metallic pigments. It provides good resistance to alcohol, sweat... view more

BLUESIL™ FLD 550HT by Elkem Silicones is a methyl phenyl polysiloxane. It is non-corrosive, radiation resistance and offers damping performance... view more

BLUESIL™ RES 6405 by Elkem Silicones is a 50 % solids methylphenylsilicone resin in toluene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack free... view more

BLUESIL™ RES 6405X by Elkem Silicones is a 50 % solids methylphenylsilicone resin in xylene solution especially developed to resist continuous service temperatures upto 600°C. Provides dry tack... view more

BLUESIL™ RES 6406XM by Elkem Silicones is a polymethyl phenyl silicone resin in a 60% xylene solution. Provides good flexibility, dry tack-free at room temperature and high temperature resistance... view more

BLUESIL™ RES 6407 by Elkem Silicones is a 70% solids methylphenylsilicone resin in toluene solution. It is solvent based and High temperature resistance (up to 400°C) when used in combination with... view more

EMEROX® 14535 by Emery Oleochemicals is a bio-based, short chain diol aliphatic polyester polyol. Offers very low viscosity and has high primary hydroxy content. It can be used as a modifier for a broad range of... view more

EMEROX® 14801 by Emery Oleochemicals is a bio-based, ethylene glycol/dimer acid based polyester polyol. It has high hydrophobic structure to support the development of polyurethanes with excellent moisture... view more

EMEROX® 14803 by Emery Oleochemicals is a bio-based, ethylene glycol/dimer acid based polyester polyol. Its high hydrophobic structure supports the development of polyurethanes with excellent moisture... view more

ESQUIM R-780 by Esquim is silicone resin. It has low hardness and high resistance to the temperature. It is recommended for the formulation of non-stick coatings... view more

Essential™ R4310 by Essential Polymers is urethane/acrylic hybrid based on aliphatic diisocyanate and a polyether polyol. It is designed for applications where hydrolytic stability and elastometric... view more

Essential™ R4370 by Essential Polymers is an aliphatic polyurethane/acrylic. It offers low VOC, balanced hardness and flexibility. It can be cross-linked with either a polyaziridine or trimer. It... view more

Essential™ R4388 by Essential Polymers is urethane/acrylic hybrid. It offers a good combination of film hardness, flexibility and toughness. It can be cross-linked with either polyaziridine or a... view more

Essential™ R4400 by Essential Polymers is hydroxyl-functional urethane/acrylic hybrid. It offers low VOC and can be cross-linked with a trimer. It shows superior chemical-, skydro- and unsurpassed... view more

Essential™ R4560 by Essential Polymers is polyurethane/acrylic hybrid based on renewable sources. It offers low VOC and is non-yellowing. It is free of n-MP, HAPs & APEO. Essential™ R4560 is... view more

Acrylic macromer. Cured coatings based on it, have excellent abrasion, high hardness and chemical resistance. It can be used to formulate clear, pigmented or highly filled systems. Formulations... view more

Acrylic macromer. Acts as an adhesion promoter. Cured coatings based on it, have excellent abrasion, scratch, chemical resistance and outstanding mechanical properties. It can be used to formulate... view more

Etercure DR-A840 by Eternal Materials is a full acrylic resin. It also acts as an adhesion promoter to difficult substrates. Exhibits good adhesion. Etercure DR-A840 is suitable for UV protective... view more

EW-32B by Ever Finde Products is a sytrene acrylic-based resin solution with high viscosity. Offers good transferring, high gloss and good scratch resistance. Shows outstanding compatibility and... view more

EW-40 by Ever Finde Products is a sytrene acrylic-based resin solution with high solid content. Offers high gloss, low molecular weight, good scratch resistance and outstanding compatibility. It is... view more

TC-K518 by Evergreen Chemicals is an epoxy resin manufactured from bisphenol-A and epichlorohydrin. It can be cured by curing agents at ambient conditions such as aliphatic polyamines, polyamides... view more

2EHMA by Evonik is a heavy aliphatic 2-ethylhexyl methacrylate. 2EHMA enhances performance properties of various polymers... view more

Dispersed silicone elastomer-modified bisphenol-A epoxy resin. Used in reaction resin based coatings and paints. Provides high temperature resistance (up to 200°C), outstanding electrical properties... view more

Dispersed silicone elastomer-modified cycloaliphatic epoxy resin. Used in reaction resin based coatings and paints. Provides high temperature resistance (up to 200°C), outstanding electrical... view more

ALBIDUR® PU 5640 is a dispersed silicone elastomer-modified PPG-triol by Evonik. Used in reaction resin based coatings and paints. Provides high temperature resistance (up to 200°C), outstanding... view more

Dispersed silicone elastomer-modified glycol/p-phthalic acid. Used in reaction resin based coatings and paints. Provides high temperature resistance (up to 200°C), outstanding electrical properties... view more