Ethylene glycol n-butyl ether acetate. Acts as a high boiling, slow evaporating ester solvent. Offers superior dispersion stability. Provides low surface tension for good wetting of substrate and... view more

CARBITOL™ Solvent by Dow Chemical is diethylene glycol monoethyl ether. Acts as a fast-acting solvent for non-grain-raising wood stains and coatings and carrier solvent for textile dyeing and... view more

Polyethylene glycol. It is a water soluble linear polymer, formed by the addition reaction of ethylene oxide to an ethylene glycol equivalent. It acts as binder and modifier. It offers attractive... view more

CARBOWAX™ Polyethylene Glycol 200 by Dow Chemical is a polyethylene glycol liquid. It is a water soluble linear polymer, formed by the addition reaction of ethylene oxide to an ethylene glycol... view more

CARBOWAX™ Polyethylene Glycol 300 by Dow Chemical is a polyethylene glycol (PEG) liquid. It is a water soluble linear polymer, formed by the addition reaction of ethylene oxide to an ethylene glycol... view more

DBE by DuPont is an environmentally friendly high-boiling, oxygenated solvent. Used to provide a wide range of flexibility in coating formulations. Offers low toxicity, very good solvency... view more

DBE-2 by DuPont is a environmentally friendly high-boiling, oxygenated solvent. Used to provide a wide range of flexibility in coating formulations. Offers low toxicity, very good solvency... view more

DBE-3 by DuPont is an environment friendly high-boiling, oxygenated solvent grade. It is used to provide a wide range of flexibility in coating formulations. It offers low toxicity, good solvency... view more

DBE-4 by DuPont is an environmentally friendly high-boiling, oxygenated solvent. Used to provide a wide range of flexibility in coating formulations. Offers low toxicity, very good solvency... view more

Environmentally friendly high-boiling, oxygenated solvent. Used to provide a wide range of flexibility in coating formulations. Offers low toxicity, very good solvency, high boiling (low vapor... view more

Carbon black aqueous dispersion. It is easy to use, free flowing and viscosity stable pigment concentrate. Possesses very high jetness and gloss. Exhibits very good chemical resistance, heat... view more

FOAM BLAST® 320CT by DyStar is an effective non-ionic defoamer. It consists of highly refined mineral oils and silica derivatives. It is recommended for acrylic emulsions. It is suitable for... view more

Concentrated aqueous (gel-free) silicone emulsion. Acts as a slip-, scratch- and mar resistance agent. It is completely free of solvents, nonylphenol (NPE) and alkylphenol ethoxylate (APE). Due to... view more

Diethylene glycol monoethyl ether. Acts as a solvent. It is a colorless and transparent liquid. Can dissolve other substances in itself. Compatible with nitrocellulose and synthetic resins. Used in... view more

Dipropylene glycol monoethyl ether (DPE). It acts as a solvent. Reduces coating temperature, speeds up cohesion and keeps coatings in good condition. Suitable for benzene propylene emulsion... view more

Dipropylene glycol monomethyl ether (DPM). It acts as a solvent. Reduces coating temperature, speeds up cohesion and keeps coatings in good condition. Suitable for benzene propylene emulsion... view more

Ethylene glycol (ethane-1, 2-diol).Acts as a solvent. It is an organic compound. Used in inks. Also used as a raw material in the manufacture of polyesters, synthetic fibers and synthetic resins... view more

Ethylene glycol (ethane-1, 2-diol).Acts as a solvent. It is an organic compound. Used in inks. Also used as a raw material in the manufacture of polyesters, synthetic fibers and synthetic resin... view more

Dynax DX4005N (mixture of 46% actives, 10% hexylene glycol and 42% water) is a highly effective and efficient fluorosurfactant which provides rapid spreading, wetting and leveling performance to... view more

Dynax DX4000 by Dynax (a mixture of 35% actives, 12% hexylene glycol and 51% water) is a highly effective and efficient fluorosurfactant which provides rapid spreading, wetting and leveling... view more

Dynax DX4010N (mixture of 45% actives, 10% hexylene glycol and 43% water) is a highly effective and efficient fluorosurfactant which provides rapid spreading, wetting and leveling performance to... view more

Polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. Dynoadd® F-1 lowers surface tension in coating formulations, thus improving substrate wetting... view more

Flow and anti-crater additive. Used in can coatings and printing inks. Possesses very good flow / leveling. Improves substrate wetting. Eliminates craters and pinholes... view more

Dynoadd® F1 by Dynea is a polymeric, non-silicone, anti-crater agent designed for solvent-borne coatings. Offers very good flow and levelling. Improves substrate wetting, eliminates craters and... view more

Silicon free polymer. Acts as a flow/leveling agent, and wetting agent. Possesses very good flow and leveling. Improves substrate wetting. Eliminates defects like craters, cissing and pinholes... view more

Polymeric, silicon free, non-VOC, flow and leveling agent. Offers very good flow and leveling. Improves substrate wetting. Reduces the surface tension in non-solvent and solvent based coating... view more

Epoxy ester resin based on dehydrated castor oil fatty acid. Possesses very good adhesion and flexibility, good chemical resistance, and very good mechanical properties. Used for applications like... view more

Epoxy ester resin based on dehydrated castor oil fatty acid. Possesses very good adhesion and flexibility, good chemical resistance, and very good mechanical properties. Used for applications like... view more

SNDA-EAGLE (SFAX28-10/60)70% by Eagle Chemicals is a short oil non-drying alkyd resin based on synthetic fatty acid. Exhibits high gloss, hardness & flexibility for PU lacquers, very good mechanical performance, good color... view more

SNDA-EAGLE (SFAX28-9/60)70% by Eagle Chemicals is a short oil non-drying alkyd resin based on synthetic fatty acid. Possesses high gloss, hardness & flexibility for PU lacquers, very good mechanical performance, good... view more

Polyester polymer dispersion. Acts as a film forming agent. It is supplied as an aqueous dispersion containing 33% polymer solids. Provides excellent alcohol resistance, fast drying rates, low odor... view more

Sulfopolyester polymer dispersion. Acts as a film forming agent. It is supplied as an aqueous solution containing 2% n-propanol and 30% polymer solids. Provides excellent water resistance, alcohol... view more

Alcohol-free, polyester polymer dispersion. Acts as a film forming agent. Aqueous dispersions of this polymer are characterized by low odor, good storage stability, and reducibility with water or... view more

Sulfopolyester polymer dispersion. Acts as a film forming agent. Aqueous dispersions of this polymer are characterized by low odor, good storage stability, and reducibility with water or... view more

Eastman TXIB™ Plasticizer by Eastman is a lowest viscosity (9 cps) plasticizer. Compatible with PVC in all proportions and is usually blended with general-purpose plasticizers such as DOP or DOTP... view more

ECOPOLCOAT CCR 30-F by Ecopol Tech is a self-crosslinking anionic aqueous poluyrethane dispersion at 30% solid content, intended for coating textiles with high hydrolytic stability. After curing, it exhibits... view more

Adherant ADK by Elementis acts as an adhesion promoter to improve adhesion between lamination inks and PET film. It is designed for gravure lamination inks on PET film, printing inks and solvent-based... view more

Dapro® DF 1492 by Elementis is a silicone-free foam suppressor can be used to prevent foam formation during mixing and provides rapid bubble-breaking in applied wet films modified polyol foam contains... view more

Dapro® DF 300 by Elementis acts as a defoamer. It is a blend of metallic salt, silica, emulsifiers and petroleum oil. It is a silicone-free opaque off-white liquid. Suitable for industrial water borne... view more

Dapro® DF 303 by Elementis acts as a defoamer. It is a blend of esters, emulsifiers and petroleum oil. It is a water dispersible opaque off-white liquid. Suitable for waterborne inks and industrial... view more

Dapro® DF 307 by Elementis acts as a defoamer. It is a blend of hydrophobic silica, emulsifiers and mineral oil. It is a water dispersible opaque off-white liquid. It shows good compatibility and is... view more

BLUESIL™ ADD 11013 by Elkem Silicones is a polyether-modified polydimethylsiloxane. Acts as a wetting agent, antifoaming agent, mar and scratch resistance agent. Improves their flow and leveling... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more

Methylalkylpolysiloxane. Acts as a tensio-active agent. Has outstanding lubricating properties and presents a good compatibility with many products other than silicones. Used for varnishes and... view more

Compound based on polydimethyl siloxane oil and silica. Acts as a defoamer. It has the characteristic of being easy to disperse in most foaming mediums. Silcolapse® 416 is self-dispersing; prior... view more

Silcolease® UV Poly 118 by Elkem Silicones is a 100% reactive, low release, UV/EB curable, monocomponent acrylate-functional silicone polymer. It consists of an optimized “low release” pre-blend of... view more

Coconut fatty acid diethanolamide. Alfonal KD acts as a surfactant, wetting agent, dispersant, emulsifier( both w/o and o/w ) and corrosion inhibitor. It exhibits stability in all acidic, neutral... view more

Spolostan 3 L by Enaspol is a sodium polynaphthalenesulfonate. Acts as a dispersing agent. It exhibits reduced sodium sulfate content. Used in textile printing... view more

It exhibits transmission of near infrared wavelengths. Shows absorption of UV and visible light. Provides good printing through 125 to 230 mesh (50 to 90/cm) mono-filament polyester fabric. Can be... view more

It exhibits transmission of near infrared wavelengths. Shows absorption of UV and visible light. Provides good printing through 125 to 230 mesh (50 to 90/cm) mono-filament polyester fabric. Can be... view more

It exhibits transmission of near infrared wavelengths. Shows absorption of UV and visible light. Provides good printing through 125 to 230 mesh (50 to 90/cm) mono-filament polyester fabric. Can be... view more

It exhibits transmission of near infrared wavelengths. Shows absorption of UV and visible light. Provides good printing through 125 to 230 mesh (50 to 90/cm) mono-filament polyester fabric. Can be... view more

70:30 Blend of oligo [2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a type-I photoinitiator. It is soluble in most monomers... view more

Oligo [2-hydroxy-2-methyl-1-[4-(1-methylvinyl) phenyl] propanone] and 2-hydroxy-2-methyl-1-phenyl-1-propanone. Acts as a type-I photoinitiator. It is soluble in most monomers, oligomers and... view more

50:50 Liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2, 4, 6-trimethylbenzoyl) phosphine oxide. Acts as a photoinitiator. Provides exceptional cure response in white and... view more

It acts as a photoinititiator. Provides a perfect balance between surface cure and through cure to enable the best possible adhesion in white as well as pastel pigmented systems. It works well as a... view more

Eutectic blend made up of a 1:1 mixture of 1-hydroxy-cyclohexylphenyl-ketone (PL-CPK) and benzophenone (PL-BPO). Acts as a photoinitiator. It is an easy to use liquid. PL -500 is soluble in most... view more

Acrylic resin. Acts as an adhesion promoter. It is a unique energy curable (UV/EB) resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters... view more

Acrylic macromer diluted in TCDDMDA. Acts as an adhesion promoter. It provides excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming... view more

Lumicryl® 1909 by Estron Chemical is a polyfunctional acrylic macromer diluted in TCDDMDA. Acts as an adhesion promoter. It may be appropriate for use as the major film forming component of UV curable... view more

Acrylic macromer diluted in TCDDMDA. Acts as an adhesion promoter. It provides excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming... view more

Acrylic macromer. Acts as an adhesion promoter. Cured coatings based on it, have excellent abrasion, scratch, chemical resistance and outstanding mechanical properties. It can be used to formulate... view more

Etercure DR-A840 by Eternal Materials is a full acrylic resin. It also acts as an adhesion promoter to difficult substrates. Exhibits good adhesion. Etercure DR-A840 is suitable for UV protective... view more

Etercure DR-E585-TF by Eternal Materials is a polyester acrylate oligomer grade. Exhibits good pigment wettability, good flexibility and excellent adhesion. Etercure DR-E585-TF is recommended for UV... view more