CYMEL® 203 resin by allnex is methylated/n-butylated, high imino melamine crosslinker supplied in n-butanol. It has a slightly higher butoxymethyl content and higher molecular weight compared to... view more

CYMEL® 350 resin by allnex is a highly methylated, monomeric melamine resin recommended for use in both water-borne and solvent-borne systems. It is a very efficient cross-linking agent and is... view more

CYMEL® 370 resin by allnex is a partially methylated melamine crosslinker supplied in iso-butanol. It shows very good compatibility with acrylic-, alkyd-, epoxy- and polyester- resins. Like other... view more

CYMEL® 3745 by allnex is a highly methylated melamine crosslinker. It is designed for use in both solvent-borne and water-borne industrial finishes. It offers excellent deformation & film... view more

CYMEL® 380 by allnex is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, it is fast reacting and has a high tendency to self-condense resulting in... view more

Borchi® Gen 1459 by Borchers is a solution of a high molecular weight polycarboxylic acid polymer and a polysiloxane copolymer in xylene. Acts as a wetting- and dispersing agent. It shortens the... view more

Borchi® Gen PB 60 by Borchers acts a specially designed wetting and dispersing agent for inorganic thixotropic additives. It offers short dispersion and activation times as well as excellent binder... view more

Borchi® Gol 1376 by Borchers is a phenylmethyl polysiloxane. Acts as a flow and levelling agent. Contains 100% active. It improves the film appearance of coatings caused by surface defects such as... view more

Pre-diluted polyether modified polysiloxane in xylene / isobutanol (4:1). Acts as a levelling agent. It lowers the surface tension of a wide range of formulated systems thereby improving flow and... view more

Polyether-modified polysiloxane in a blend of Solvesso 100/methoxy propyl acetate (9:1). Acts as levelling and wetting agent. Contains 50% active. Provides improved flow and levelling properties as... view more

Bengel® 958 by Elementis is an easy dispersible rheological additive for low to medium polarity binders and solvents. It is cost-effective organic derivative of a bentonite clay. It is easy to... view more

Bentone® SD-3 by Elementis is an organic derivative of hectorite (smectite) clay-based highly efficient rheological additive. It is designed for use in coating systems with a wide range of solvent... view more

NUOSPERSE® 1 by Elementis acts as a dispersing, wetting and stabilizing agent. It is efficiently wets and deflocculates most organic and inorganic pigments and then stabilizes the finished dispersion... view more