Maleic anhydride grafted polyethylene (MA –g-HDPE). It acts as an adhesion promoter & compatibilizer. Offers higher grafting ratio & increased adhesive nature. Used in manufacturing PE powder... view more

Maleic anhydride grafted polyethylene (MA –g-HDPE). It acts as an adhesion promoter & compatibilizer. Offers highest grafting ratio & increased toughness. Used in manufacturing PE powder coating for... view more

Silicone absorbed on a silica carrier. It acts as a texturing agent. Used for distinct rupture- and crater finishes in powder coating applications. Recommended usage level is 0.2-0.6% based on total... view more

Masterbatch composed of AHA1088P, epoxy resin and polyester. It acts as a texturing agent. Used for hammertone- and antique finishes in powder coating applications. Recommended usage level is... view more

It acts as a surfactant and texturing agent. Used for hammertone or antique finishes, extruded process. Recommended usage level is 0.1-0.4% based on total formulation... view more

Acrylic homopolymer with solid epoxy resin. It acts as a flow modifier. Used in epoxy- and hybrid powder coatings. Recommended usage level is up to 10 phr (per hundred resin) based on total... view more

Polyacrylate absorbed on a silica carrier. It acts as a flow modifier/ flow control agent. Used in powder coatings. Recommended usage level is 0.5-1.5% based on total formulation... view more

Micronized PTFE wax. It acts as a grained (sand) finish agent. Used in powder coatings. Recommended usage level is 0.7-1.5% based on total formulation... view more

Organo-metallic complex. It acts as a texturing agent. Used in grained, wrinkled or reticulated finishes. Applications include pure epoxy or hybrid powder coatings. Recommended usage level is 1-5%... view more

Tetramethoxymethyl glycoluril. It acts as a crosslinker for OH-terminated polyesters. Offers durable wrinkle finish in powder coatings. Recommended usage level is 6/94 (mixture ratio with polyester)... view more

COOH-terminated polyester oligomer. It acts as a texturing agent. Used in co-reaction for exterior durable frost-pattern in combination with AHA 7700 GMA resin/polyester. Applications include... view more

Modified polyethylene wax. It acts as a matting agent. Provides gloss of 30%. Offers good flow and anti-yellowing. Used for TGIC (triglycidyl isocyanurate) based powder coatings in exterior... view more

It acts as a matting agent. Provides gloss of 10-15%. Offers anti-yellowing and high flow. Used for hybrid powder coatings in interior applications. Recommended usage level is 1-5% based on total... view more

Blend of acrylic resin with polyethylene wax. It acts as a matting agent. Has low wax content and offers excellent anti-yellowing. Provides gloss of 20%. Used for TGIC (triglycidyl isocyanurate)... view more

Blend of acrylic resin with polyethylene wax. It acts as a matting agent. Has low wax content and offers excellent anti-yellowing. Provides gloss of 12%. Used for TGIC (triglycidyl isocyanurate)... view more

It acts as a matting agent. Provides gloss of 5%. Offers high flow and better compatibility with polyesters. Used for hybrid powder coatings in interior applications. Recommended usage level is low... view more

Acid acrylic. It acts as a matting agent. Possesses limited reactivity with epoxies for hybrids. Provides gloss of 5%. Offers high flow and better compatibility with polyesters. Used for powder... view more

Modified polycarboxylic acid. It acts as a hardener. Provides the lowest gloss of 10%. Used for low gloss triglycidyl isocyanurate (TGIC) powder coatings in exterior applications. Recommended usage... view more

Aliphatic acid derivative (dry blend). It acts as a matting agent. Used for both TGIC (triglycidyl isocyanurate) and hybrid powder coatings. Recommended usage level is 1-2% based on total... view more

Polar fatty acid ester. Acts as a charge control agent. It is non-catalytically active. Offers improved flow and non-yellowing. Used in powder coatings. Recommended usage level is 1-3% based upon... view more