C-TEC™ CTZB400 by Marshall Additive Technologies is ultra-fine, zinc borate-based flame retardant/smoke suppressant. It offers increased char strength, reduced smoke, afterglow suppression and... view more

Benzotriazole. Acts as an ultraviolet light absorber (UVA) in many coatings. Provides good light stability for plastics, other organic polymers and organic pigments, thermal stability to processing... view more

McLube PTFE POWDER by McLube acts as a slip control agent and abrasion resistance agent. It provides durable dry film coating when used with binders. McLube PTFE POWDER is recommended for general purpose... view more

3,3'-Diaminodiphenylsulfone by Mitsui Chemicals acts as a curing agent. It is an aromatic sulfone diamine. SO2 offers better performance in bonding carbon-fibers. 3,3'-Diaminodiphenylsulfone is used for a heat-resistant epoxy resin... view more

4,4'-Diaminodiphenylether (4,4'-DADPE) by Mitsui Chemicals acts as an epoxy curing agent. It is an aromatic ether diamine. This thermosetting resin made from ODA has an adhesive properties and flexibility. Used in the heat-resistant... view more

4,4'-Diaminodiphenylsulfone by Mitsui Chemicals acts as a curing agent. It is an aromatic sulfone diamine. SO2 offers better performance in bonding carbon-fibers. Used for a heat-resistant epoxy resin... view more

Diaminodihydroxysulfone (BS-DA). Acts as a curing agent. It is an aromatic sulfone diamine. SO2 offers better performance in bonding carbon-fibers. Used for a photosensitive epoxy resin... view more

UV-531 (BP-12) is a benzophenone-12 by Nanjing Lepuz Chemical. It acts as a ultraviolet light absorber & as an antioxidant. It has features such as light color, non-toxicity, light stability, good... view more

Micronized wax. Improves the surface properties like electrostatic charge and pigment wetting. Used in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics... view more

PEW-0655F by Nanjing Tianshi New Material Technologies is a micronized polytetrafluoroethylene modified polyethylene wax suitable for solvent-based and UV curing coatings & inks. It provides... view more

PEW-0674F by Nanjing Tianshi New Material Technologies is a micronized polytetrafluoroethylene modified polyethylene wax suitable for solvent-based coatings and printing inks. It provides scratch... view more

POLYCOR™ CS by NanoPure is a corrosion inhibitor based on conductive polymeric composite specified modified polyaniline with addition of manganese (II) compound. It is non-toxic and environment... view more

Salts of poly-carboxylic acid with cyclic amidine. Used in powder coatings. Offers good colour and gloss stability. Exhibits very good flow properties... view more

Salts of poly-carboxylic acid with cyclic amidine. Used in powder coatings. Offers good colour and gloss stability. Exhibits very good flow properties... view more

It acts as a flow and leveling agent. Designed to promote the control of orange peel and other surface defects in powder coatings. It is compatible with a wide variety of resins & other materials... view more

Rheology modifier. Used in non-aqueous coatings and inks. Provides a high degree of thixotropy for pigmented systems containing aliphatic and aromatic solvents with oils, resins, varnishes and a... view more

Rheology modifier. Used in non-aqueous coatings and inks. Provides a high degree of thixotropy for pigmented systems containing aliphatic and aromatic solvents with oils, resins, varnishes and a... view more

Actiron® NX 91 P by Protex is a tertiary amine. It acts as a latent catalyst for epoxy, hybrid and polyurethane (PU) systems. Actiron® NX 91 P is suitable for use in powder coatings... view more

2-methylimidazole dispersion. Acts as an accelerator for use with dicyandiamide epoxy hardener. Used in powder coatings... view more

Special highly reactive non yellowing catalyst absorbed on silica. Does not influence negatively the yellowing of the coating. Improves substantially the anticorrosion characteristics of the... view more