Green thermoplastic fluorescent pigment. It has very fine particles, is free from formaldehyde and exhibits exceptional light-, heat- & chemical-stability. Used in water based textile printing... view more

Green thermoplastic fluorescent pigment. It has very fine particles, is free from formaldehyde and exhibits exceptional light-, heat- & chemical-stability. Used in water based textile printing... view more

Blue thermoplastic fluorescent pigment. It has very fine particles, is free from formaldehyde and exhibits exceptional light-, heat- & chemical-stability. Used in water based textile printing... view more

Rose-colored thermoplastic fluorescent pigment. It has very fine particles, is free from formaldehyde and exhibits exceptional light-, heat- & chemical-stability. Used in water based textile... view more

Rose-colored thermoplastic fluorescent pigment. It has very fine particles, is free from formaldehyde and exhibits exceptional light-, heat- & chemical-stability. Used in water based textile... view more

RENEWABLE ETHYL ACETATE – URETHANE GRADE by Viridis Chemical is an environmentally friendly, 100% bio-based ethyl acetate solvent. It offers excellent solvency, rapid evaporation and low toxicity. It is highly dispersive and exhibits... view more

PUD 122 by Vynax is an anionic, co-solvent-free, aliphatic polyester resin. It is a performance enhancer for anti-cracking properties on flatted design pigment printing. PUD 122 offers deep... view more

PUD 202 by Vynax is an anionic, co-solvent-free, aliphatic polyester. It acts as a co-binder. It shows elastic film properties to textile screen printing ink. PUD 202 is suitable for foil... view more

XR-101 by Vynax is an anionic, crosslinker. It is used in the finishing and in textile printing without any yellowing problem. It is MEKO-free and shows no change in the original appearance... view more

POLYVIOL® 2700 18% SOLUTION by Wacker is an aqueous polymer solution based on polyvinyl alcohol. POLYVIOL® 2700 18% SOLUTION is used for ink jet and paper coating... view more

VINNAPAS® AF 474 by Wacker is an aqueous dispersion of a hydroxy-functional acrylate copolymer. Adheres extremely well to metals and many polar plastics and forms a transparent coating at room... view more

VINNAPAS® EPN 865 by Wacker is an aqueous, self-crosslinking, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. Provides good adhesion to various plastic... view more

EPIKURE™ Curing Agent 3100-ET-60 by Westlake Epoxy is a curing agent. It is a high molecular weight, reactive polyamide, based on dimerized fatty acid and polyamines. This additive offers very good... view more

Special-Primer PE 6800 by Worlee acts as an adhesion promoter for polyethylene. Special-Primer PE 6800 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other... view more

Special-Primer PP 5130 by Worlee acts as an adhesion promoter developed especially for polypropylene. It is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer... view more

Polymeric flow control agent and resin modifier. Used as additive to correct surface imperfections in solvent based coatings, high solids, UV-coatings and powder coatings. Printing ink formulations... view more

Special polymeric silicone-free flow control agent and resin modifier. Used to correct surface imperfections mainly in solvent based and solvent free lacquers and printing inks incl. powder coating... view more