ACTICIDE® MV by Thor is a VOC-free, monovalent stabilized industrial microbiocide. It controls the growth of bacteria and fungi. Suitable for aqueous formaldehyde and bivalent metal ion sensitive... view more

ACTICIDE® MV 14 by Thor acts as an industrial microbiocide, algicide and fungicide. Suggested for wet state protection of aqueous formulations, industrial water treatment and formulation of... view more

ACTICIDE® SPX by Thor acts as an industrial microbiocide and algicide & fungicide. It controls the growth of bacteria and fungi. It is a mixture of 5–chloro–2–methyl–4–isothiazolin–3–one (1.11%) and... view more

Glycol ester. Used as a very efficient defoamer for acrylic latex and water reducible binders in flexo inks. Offers rapid knockdown and very good hold-down properties. Gives very good product... view more

Chlorinated polypropylene. HARDLEN BS-40 acts as an adhesion promoter and a compatibilizer. It exhibits low molecular weight, very good compatibility with a wide range of resin systems including... view more

Troysol™ ZLAC by Troy Corporation acts as a multipurpose, silicone-free wetting additive. Provides all of the benefits of Troysol LAC with no contribution to VOC in aqueous systems. Improves... view more

Troysperse™ W by Troy Corporation is a formulation of surfactant and modified fatty acids. Acts as a wetting and dispersing agent in water-based paints, lacquers, plasters, color concentrates... view more

UNIQFOAM 120 S by Uniqchem is a heat stable, silicone-free defoaming agent. It does not interfere with intercoat adhesion. Compatible with 2-pack epoxy, alkyd, acrylic and polyester resins. Designed... view more

Polymeric flow control agent and resin modifier. Used as additive to correct surface imperfections in solvent based coatings, high solids, UV-coatings and powder coatings. Printing ink formulations... view more

Special polymeric silicone-free flow control agent and resin modifier. Used to correct surface imperfections mainly in solvent based and solvent free lacquers and printing inks incl. powder coating... view more

Special additive based on dioctylsulfosuccinate and a silicone copolyether. Used in coatings on wood, printing inks, care products etc... view more

Polyether siloxane copolymer. Acts as wetting agent and anti-crater aid. It provides low foam stability and powerful reduction of surface tension in aqueous systems. Wynca® XHG-247 offers rapid... view more

Polyether siloxane copolymer. Acts as wetting agent and anti-crater aid. It provides powerful reduction of surface tension in aqueous systems. Wynca® XHG-249 offers rapid wetting, spread and... view more

Dipropylene Glycol Monoethyl Ether (DPE) by Zhengzhou Meiya Chemical Products is a solvent which offers good solvency. It is compatible with epoxies, acrylics, alkyds, polyesters, nitrocellulose and... view more

Propylene Glycol Methyl Ether Acetate (PMA) by Zhengzhou Meiya Chemical Products is a carrier solvent with a sweet ether-like odor. It is compatible with cellulose acetate butyrate, nitrocellulose... view more

Propylene Glycol Monoethyl Ether (PE) by Zhengzhou Meiya Chemical Products is a solvent which offers good solvency. It is miscible with both polar and non-polar substances. It is compatible with... view more

Tert-Butyl Acetate (TBAC) by Zhengzhou Meiya Chemical Products is a VOC-exempt, solvent with a mild odor. It improves compatibility of solvents with nitrocellulose, acrylic, alkyd, polyester and... view more

Surfactol® 318 by aurorium is a non-ionic surfactant based on the addition of ethylene oxide to the hydroxyl groups in castor oil. Acts as a defoamer, emulsifier, wetting and anti-static agent. Shows... view more

Surfactol® 365 by aurorium is a non-ionic surfactant based on the addition of ethylene oxide to the hydroxyl groups in castor oil. Acts as a wetting agent, defoamer, emulsifier and anti-static agent... view more