BRB Siloen® LA 271 is a flow and leveling agent by BRB International BV. It is glycol-modified silicone fluid suitable for water- & solvent-borne and radiation curing systems with good substrate... view more

DISPERBYK® -168 by BYK is an aromatic-free wetting and dispersing additive for solvent-borne and solvent-free radiation-curable coatings and printing inks. It is a solution of higher molecular... view more

DOWSIL™ 100F Additive by Dow is a fluorosilicone (1%) in diisobutyl ketone. Acts as a defoaming agent. It exhibits good surface appearance even after long-term storage. Provides efficient foam... view more

DOWSIL™ 102F Additive by Dow is a fluorosilicone (1%) in mixture of methyl ethyl ketone and n-propyl acetate. Acts as a defoaming/anti-foaming agent. Exhibits low tendency to cause craters and does... view more

Polymeric flow control agent and resin modifier. Used as additive for powder coatings, solvent based coatings, high solids, coil coatings, UV-coatings, printing inks based on flexographic or silk... view more

Liquid Hindered Amine Light Stabilizer (HALS). Provides very good light stability to variety of coating systems, including waterborne and UV curable coatings, and long term stability to a variety of... view more

Liquid Hindered Amine Light Stabilizer (HALS). Provides very good light stability to variety of coating systems, including waterborne and UV curable coatings, and long term stability to a variety of... view more

UNIQFOAM 120 S by Uniqchem is a heat stable, silicone-free defoaming agent. It does not interfere with intercoat adhesion. Compatible with 2-pack epoxy, alkyd, acrylic and polyester resins. Designed... view more

Polymeric flow control agent and resin modifier. Used as additive to correct surface imperfections in solvent based coatings, high solids, UV-coatings and powder coatings. Printing ink formulations... view more