ADDITOL® XW 6585 by allnex is an easy to incorporate, anti foam/air release modified silicone-based defoamer. It is VOC-free (EU 2004/42/EG), mineral-, emulsifier & APEO-free with no influence on... view more

ADDITOL® XW 6586 by allnex is a very versatile, multipurpose silicone additive (organomodified polysiloxane type) for improved surface quality and substrate wetting. This APEO- & formaldehyde-free... view more

CYMEL® U-80 resin by allnex is a highly n-butylated urea formaldehyde resin-based crosslinker with excellent compatibility with most film formers. It is soluble in most solvents and has excellent... view more

DUROFTAL® AQ-803 by allnex is an oil-free polyester resin diluted in R-9 solvent. It offers high brightness, excellent flexibility, optimal grip and initial color retention. It shows partial... view more

EBECRYL® 113 by allnex is a low odor, low viscosity, aliphatic monofunctional acrylate with secondary hydroxyl functionality. It exhibits good pigment wetting and allows efficient reduction of... view more

EBECRYL® 1141 by allnex is a purified ditrimethylolpropane tetraacrylate having a reduced content of residual components. It is used in ultraviolet light (UV) and electron beam (EB) curable coatings... view more

EBECRYL® 1360 by allnex is silicone hexaacrylate which contributes slip, substrate wetting and flow & leveling properties when used as an additive in formulations cured by UV or EB. It is a low... view more

EBECRYL® 140 by allnex is ditrimethylolpropane tetraacrylate, a reactive diluent. It exhibits good cure response, light color and low irritancy. It is compatible with a wide range of acrylated... view more

EBECRYL® 145 by allnex is Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in... view more

EBECRYL® 150 by allnex is ethoxylated bisphenol A derivative diacrylate. It improves the cure response, hardness, wetting and chemical resistance of UV/EB curable coatings and inks. It possesses... view more

EBECRYL® 160 by allnex is a reactive diluent used in ultraviolet light (UV) and electron beam (EB) energy-curable coatings & inks. It is a trifunctional diluting oligomer that polymerizes when... view more

EBECRYL® 1608 by allnex is diacrylate ester of bisphenol A epoxy resin diluted with 15% of oligotriacrylate. This resin is characterized by its low odor, light color, low irritancy and very fast... view more

EBECRYL® 1871 by allnex is hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. The inks based on... view more

EBECRYL® 264 by allnex is an aliphatic urethane triacrylate diluted 15% by weight with the reactive diluent 1,6-hexanediol diacrylate (HDODA). It is characterized by low odor, light color and fast... view more

EBECRYL® 266 by allnex is a Sn-free, aliphatic urethane triacrylate oligomer diluted with 25% of tripropyleneglycol diacrylate (TPGDA) monomer. It is characterized by light color and good cure... view more

EBECRYL® 341 by allnex is a low viscosity, low odor, silicone-free slip additive master batch. It provides improvement of slip between UV/EB cured coatings, good inter-coat adhesion and glueability... view more

EBECRYL® 3411 by allnex is a fatty acid modified epoxy diacrylate resin. It provides low viscosity, good flow, leveling, and excellent pigment wetting properties. Films of EBECRYL® 3411 cured by... view more

EBECRYL® 3420 by allnex is a low viscosity, modified epoxy acrylate with good pigment wetting ability. It is especially suited for UV offset lithography and flexo inks but can of course be used for... view more

EBECRYL® 350 by allnex is a silicone diacrylate that improves slip, substrate wetting, coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron... view more

EBECRYL® 3500 by allnex is a modified bisphenol A epoxy diacrylate. It exhibits relatively low viscosity and adhesion to many plastics. Films cured by ultraviolet light (UV) or electron beam (EB)... view more