UCECOAT® 2806 by allnex is a solvent-, tin-, BPA- & APEO-free, high-performance low migration LED curable polyurethane dispersion for digital printing. This low viscosity water-borne UV/EB energy... view more

VIALKYD® AQ-518 by allnex is a long, non-drying alkyd resin in castor oil. Suitable for inks and varnishes for off-set and heat-set printing. Designed for grinding vehicle for pigments and road... view more

β-CEA (β-carboxyethyl acrylate) by allnex is a mixture of reactive esters, each of which contain both acrylate and carboxylic acid functionality in the same molecule. Because of its carboxylic acid... view more

Rilsan® D40 NATURAL is a high performance, low density polyamide 11 (PA 11) grade by Arkema. Recommended for coil-, wood- and plastic coatings. Exhibits good dispersion capacity, good impact... view more

Synthetic resin. Acts as an adhesion promoter and tackifier. This dispersion has Pentalyn® C as the ingredient. Offers high softening point and greater resistance to oxidation. Used mainly in... view more

Joncryl® ECO 2124 by BASF is a glycol ether-free, HAPs-free, ultra-low VOC, very soft film forming, rheology controlled acrylic emulsion. It offers good adhesion, flexibility and low odor. It is... view more

Unilene® A-100 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It is obtained through catalytic polymerization in a continuous process, pastillated in a pearl-like... view more

Unilene® A-90 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It has a controlled naphthalene content which allows for a less pronounced odor when compared to... view more

Unilene® B-100 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It is recommended for paints and varnishes (road marking, printing inks, aluminium and protective... view more

Unilene® B-110 LN by Braskem is a low molecular weight, thermoplastic aromatic C9 hydrocarbon resin. It is obtained through catalytic polymerization in a continuous process, pastillated in a pearl-like... view more

NeoCryl® A-1092 by Covestro is a film-forming, modified styrene acrylic copolymer dispersion. It provides printability, grease- & water resistance, hardness, clarity and adhesion to various... view more

Anionic modified acrylic/styrene copolymer dispersion. Used in low odor and low VOC printing inks and over print varnishes. Provides very good coatability, gloss and transparency. Can be formulated... view more

Anionic modified acrylic/styrene copolymer dispersion. Used as a let down resin for low odor and low VOC over print varnishes for films, foils and paper and water-based flexo/gravure printings onto... view more

Anionic modified acrylic styrene copolymer dispersion. Used for low cobb overprint varnish and paper/board coating, fat and grease resistant barrier coatings and coatings for deep freeze packages... view more

Anionic modified acrylic styrene copolymer emulsion. Used in low odor and low VOC overprint varnishes, paper and barrier coatings. Provides very good printability and transparency, fast film... view more