Micronized modified polyethylene wax. Acts as an abrasion & scratch resistant and surface slip control agent. Can be used in aqueous systems which contain a high proportion of organic co-solvents... view more

Micronized modified polyethylene wax. It exhibits improved scratch and mar resistance. It offers improved abrasion resistance. Provides improved matting effect by very good orientation of the wax... view more

TIXOGEL® VP by BYK is a thixotropic agent. It is soluble in toluene, xylene, solvent naphtha, styrene and aliphatic hydrocarbons (spirit & turpentine oil). Used in road traffic-, chloride & cyclo... view more

Acrylamidomethyl-substituted cellulose ester polymer. Responses very rapidly to the curing. Acts as a rheology modifier, and as an adhesion promoter, which once cured will chemically crosslink into... view more

Acrylamidomethyl-substituted cellulose ester polymer. Responses very rapidly to the curing. Also acts as a rheology modifier, and as an adhesion promoter, which once cured will chemically crosslink... view more

CELCHEM 31745-09 by Celeritas Chemicals is tetraallkyl ammonium bentonite. It is an organoclay which acts as a rheology and viscosity modifier. Exhibits ease of incorporation, high gelling efficiency in aliphatic... view more

PHOTOINITIATOR 127 by Cheermove is a high-efficiency, non-yellowing photoinitiator for low viscosity, thin coat UV coatings. It offers superior reactivity, lower sensitivity to oxygen, better surface... view more

PHOTOINITIATOR 907 by Cheermove acts as a photoinitiator for pigment-cured ultraviolet curing coating, inks and colored curing system. It can prevent from yellowing for a long time and prolong... view more

PHOTOINITIATOR 908 by Cheermove acts as a photoinitiator with excellent absorption properties. It offers best UV-curing solution like good performance in curing pigmented formulations, excellent outdoor... view more

PHOTOINITIATOR BDK by Cheermove acts as a photoinitiator. It has excellent thermal stability and high quenching resistance. It is widely used in UV curing systems with strong absorption in UV inks... view more

PHOTOINITIATOR EDB by Cheermove is a highly efficient amine synergist (aminobenzoate) used in combination with type II photoinitiators. It is recommended for UV-curable pigmented coatings and... view more

SMA® 2021 by Cray Valley (Total Group) is a medium molecular weight styrene-maleic anhydride copolymer with an approximately 2:1 mole ratio. It is available in flake or powder form. It has high... view more

ACumist® A-12 distributed by DKSH is a micronized oxidized polyethylene homopolymer. It can also be used as a processing aid- & matting- and Anti settling agent. It is used in water-based... view more

Luna-cure 907 distributed by DKSH is a photoinitiator. It is used in UV applications in lithographic inks, silkscreen inks, flexo inks, plastic coatings and overprint varnishes. Luna-cure 907 is... view more

DEUREX® E 0920 M by Deurex is a soft, good gloss, microsized polyethylene wax. Acts as a slip agent, anti-blocking agent, rub & scratch resistance agent, matting agent and water repellant. Shows... view more

DEUREX® F 6114 M by Deurex is a microsized polyolefin wax double coated with polytetrafluoroethylene (PTFE). Acts as an anti-blocking agent, matting agent, rub & scratch resistance agent, water... view more

DEUREX® F 6214 M by Deurex is a polytetrafluoroethylene (PTFE) coated microsized polyolefin wax. Acts as an anti-blocking agent, slip agent, matting agent, rub & scratch resistance agent and water... view more

DEUREX® F 6314 M by Deurex is a microsized polyolefin wax spot coated with polytetrafluoroethylene (PTFE). Acts as a slip agent, rub & scratch resistance agent, anti-blocking agent, matting agent... view more