Plastic Coatings

Tech Paper

EPOCROS™: Cross-linker and adhesion agent for paints

A water-based adhesion promoting agent for paints and classified as- Emulsion Type, Water-soluble type and Granule Type . It is highly reactive to carboxyl groups with minimal toxicity . It...

Download

Tech Paper

Advance the performance of your formulations with Dynamix® Black 30C940

Dynamix® Black 30C940 by Shepherd is a black, non-bleeding, non-migratory and non-warping pigment. It resists heat, light and weather and is easily dispersible with no need for grinding. It can...

Download

Case Study

Discover Techpolymer™ EFC Series: Bio-based Matting Agents

Read the case study for bio-based Techpolymer™ series by SeikiSui Kasei that gives matting effect through coatings on various applications, especially for wood, furniture, plastic and coil coatings...

Download

Tech Paper

Dynamix® Black 30C933 to ease your coatings' formulations

Read the technical information about Dynamix® Black 30C933 by Shepherd that is a black powder and is chemically inert and stable to ultraviolet light. It is non-bleeding and non-migratory pigment...

Download

Tech Paper

Avoid challenges in coatings' formulations with Dynamix® Black 30C941

Read this Technical document about Dynamix® Black 30C941 by Shepherd is a black pigment that is chemically inert, heat resistant and stable to ultraviolet light. It is non-bleeding, non-migratory...

Download

Tech Paper

Dynamix® Black 30C965: High-performance jet-black pigment for coatings

Get to Know about Dynamix® Black 30C965 by Shepherd that is a jet-black pigment produced by high temperature calcination. It has good UV and visible opacity and provide resistance from heat, light...

Download

Tech Paper

Ensure the high performance of coatings with Dynamix® Blue 30C527

Dynamix® Blue 30C527 by Shepherd is a dark blue-green powder that is produced by high temperature calcination. It is a non-bleeding and non-migratory pigment with high durability and hiding power...

Download

Tech Paper

Use Dynamix® Blue 30C588 by Shepherd for coatings applications

Get to know about Dynamix® Blue 30C588 by Shepherd is a rich blue powder produced by high temperature calcination. It is a non-bleeding and non-migratory pigment. Key Features: Fully dispersed...

Download

Tech Paper

Keeping the Surface Clean: EXOCOAT 151A

EXOCOAT 151A is a doped nano-titanium oxide sol with a strong photocatalytic performance. It has a very low activation energy to perform and will show its performance already under visible...

Download

Tech Paper

An Introduction to the Dispurez Range

Polyurethane Dispersions (PUDs) are often the polymer type favoured by waterborne coating formulators to boost performance properties such as toughness, scratch and chemical resistance in a wide...

Download