CHARMAX LS™ CM by Polymer Additives Group is calcium molybdate. It is compatible with flexible & rigid polyvinyl chloride (PVC), nitrile butadiene rubber (NBR) and polyolefins. It is a smoke... view more

CHARMAX LS™ ZB 400 by Polymer Additives Group is zinc borate. It is compatible with nylon, flexible & rigid polyvinyl chloride (PVC), nitrile butadiene rubber (NBR) and polyolefins. It is an... view more

CHARMAX LS™ ZHS by Polymer Additives Group is zinc hydroxystannate. It is an excellent smoke suppressant designed to meet stringent smoke requirements for a wide variety of applications. CHARMAX LS™... view more

CHARMAX LS™ ZM by Polymer Additives Group is zinc molybdate. It is a smoke suppressant. It is compatible with flexible & rigid polyvinyl chloride (PVC), polyolefins and nitrile butadiene rubber... view more

CHARMAX LS™ ZST by Polymer Additives Group is zinc stannate. It is an excellent smoke suppressant. CHARMAX LS™ ZST is compatible with nylon, flexible & rigid polyvinyl chloride (PVC), nitrile... view more

Alcure® 4400 by Polynt is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with e-caprolactam. When formulated in coating powders, Alcure® 4400 yield a coating with excellent... view more

Alcure® 4402 by Polynt is a polymeric aliphatic isocyanate hardener based on IPDI and blocked with e-caprolactam. It has higher reactivity than Alcure®4400 and shows equivalent performance to higher... view more

Alcure® 4430 by Polynt is a polymeric aliphatic isocyanate hardener based on H12MDI and blocked with e-caprolactam. When formulated in coating powders, Alcure® 4430 yield a coating with excellent... view more

Alcure® 4431 by Polynt is a polymeric aliphatic isocyanate hardener based on H12MDI and blocked with e-caprolactam. It is specially designed to yield coatings with significantly better overbake and... view more

Alcure® 4450 by Polynt is a polymeric aromatic isocyanate hardener based on TDI and blocked with e-caprolactam. It is designed for interior or primer use and for low temperature cure. It provides... view more

PORAVER® SPECIAL 0.1-0.5 Grain Size by Poraver is an ecological, VOC-free, non-combustible and lightweight filler. This expanded glass granulate is made from post-consumer recycled glass. It gives... view more

PORAVER® SPECIAL 0.25-0.5 Grain Size by Poraver is an ecological, non-combustible, VOC-free and lightweight filler. It provides thermal insulating and sound absorption properties. This product... view more

PORAVER® SPECIAL 0.35-1 Grain Size by Poraver is an ecological, VOC-free, non-combustible and lightweight filler. This expanded glass granulate is made from post-consumer recycled glass. It provides... view more

PORAVER® SPECIAL 0.5-2.5 Grain Size by Poraver is an ecological, VOC-free, non-combustible and lightweight filler. It provides thermal insulating and sound absorption properties. This product offers... view more

PORAVER® STANDARD 0.04-0.125 Grain Size by Poraver is a VOC-free and lightweight filler. This expanded glass granulate is made from post-consumer recycled glass. PORAVER® STANDARD 0.04-0.125 Grain... view more

Non-porous soda-lime glass. Used for resin extension for a variety of high performance applications in paints and coatings including topcoats and primer paints. Provides VOC reduction in... view more

Non-porous soda-lime glass. Used for resin extension for a variety of high performance applications in paints and coatings including topcoats and primer paints. Provides VOC reduction in... view more

Non-porous soda-lime glass. Used for resin extension for a variety of high performance applications in paints and coatings including topcoats and primer paints. Provides VOC reduction in... view more

Non-porous soda-lime glass. Used for resin extension for a variety of high performance applications in paints and coatings including topcoats and primer paints. Provides VOC reduction in... view more

Non-porous soda-lime glass. Used for resin extension for a variety of high performance applications in paints and coatings including topcoats and primer paints. Provides VOC reduction in... view more

gamma-Glycidoxypropyltriethoxysilane. It is a clear colorless, low-odor liquid. Acts as an adhesion promoter. Used in urethane- and epoxy coatings... view more

Gamma-aminopropyltriethoxysilane. It acts as a coupling agent and adhesion promoter. Provides superior bonds between inorganic substrates and organic polymers. Exhibits compatibility with... view more

Gamma-aminopropylmethyldiethoxysilane. It acts as an adhesion promoter and surface modifier. Exhibits compatibility with glass, glass fibers, glass wool, mineral wool, silicic acid, quartz, sand... view more

N-beta-(amino ethyl)-gamma-amino propyl-trimethoxysilane. It acts as a cross-linker, coupling agent and adhesion promoter. Exhibits alkalinity and compatibility with urethanes, phenolics and... view more

Aminoethylaminomethyltriethoxysilane (N-(2-aminoethyl)-aminomethyltriethoxysilane). It acts as an adhesion promoter. It is a bifunctional organosilane possessing two reactive amino groups and... view more

Powersol A 40 (Ammonium Salt) by Power Chemical Industries is a modified acrylic resin. Acts as a dispersing agent. Available in the form of clear yellowish thick liquid. Powersol A 40 (Ammonium... view more

Powersol M 40 (Amine Salt) by Power Chemical Industries is a modified acrylic resin designed for emulsion paints. Acts as a dispersing agent. Powersol M 40 (Amine Salt) is available as clear... view more

Powersol N 40 (Sodium Salt) by Power Chemical Industries is a clear yellowish, modified acrylic resin. Acts as a dispersing agent designed for emulsion paints. Powersol N 40 (Sodium Salt) is... view more

1-METHOXYPROPANOL (PM) by Prasol Chemicals is a solvent for water-based paints, varnishes and inks. It promotes polymer fusion in drying process. It is used in automotive, architectural, industrial maintenance, wood... view more

3,3,5-TRIMETHYLCYCLOHEXANONE by Prasol Chemicals acts as a polymerization initiator. It is clear liquid, free from suspended matter. It is used in coatings and paints to give improved leveling, gloss and finish... view more

ADDITIVE AP 84121 by Prasol Chemicals acts as a viscosity reducer for paints. It provides rust preventive coating for metals. It is also used as foam inhibitors and stabilizers in paints. It has excellent load... view more

Aluminium Stearate by Pratham Stearchem is an aluminum salt of stearic acid. It acts as a water repellent agent and hydrophobic agent making it useful to be used as a waterproofing agent in paint... view more

Zinc Stearate is zinc salt of stearic acid by Pratham Stearchem. It acts as a gloss imparting agent and a grinding agent. It repels water (hydrophobic) and appears as a white colored powder. It is... view more

Used in coil coatings, can coatings and general industrial gloss enamels. Offers high hardness and high gloss. Provides good flexibility. Exhibits very good color and color retention. Improves... view more

Used for general industrial gloss, bake enamels, silk screen and gravure inks, oven bake metal coatings, textile printing, coating for internal and external food packaging. Offers good elongation... view more

Used for general industrial gloss, bake enamels, silk screen and gravure inks, oven bake metal coatings, textile printing, coating for internal and external food packaging. Improves bonding to metal... view more

Used for general industrial gloss, bake enamels, silk screen and gravure inks, oven bake metal coatings, textile printing, coating for internal and external food packaging. Improves bonding to metal... view more

CF-0.5mm by Procotex is a blend of carbon and graphite ex-PAN fibers obtained from spools of pure carbon fiber. It is available in black or charcoal grey color in solid form. CF-0.5mm is suitable... view more

CF-0.7mm by Procotex is a blend of carbon and graphite ex-PAN fibers. It is obtained by precise cutting from spools of pure carbon fiber. It is available in black or charcoal grey color in solid... view more

CF-1.5mm by Procotex is a blend of carbon and graphite ex-PAN fibers. It is available in black or charcoal grey color in solid form. It is obtained by precise cutting from spools of pure carbon... view more

CF-120mm by Procotex is a blend of carbon and graphite ex-PAN fibers. It is available in black or charcoal grey color in solid form. It is obtained by precise cutting from spools of pure carbon... view more

CF-50mm by Procotex is a blend of carbon and graphite ex-PAN fibers. It is available in black or charcoal grey color in solid form. It is obtained by precise cutting from spools of pure carbon... view more

CHS® 18 is a silver infused glass sphere. Acts as a conductive filler. Exhibits very low density with a crush strength of >8,000 psi. It is designed to resist oxidation and cost effectively improve... view more

CHS® 25 is a silver infused glass sphere. Acts as a conductive filler. Exhibits very low density with a crush strength of >8,000 psi. It is designed to resist oxidation and cost effectively improve... view more

CHS® 30 is a silver infused glass sphere. Acts as a conductive filler. Exhibits very low density with a crush strength of >8,000 psi. It is designed to resist oxidation and cost effectively improve... view more

CHS® 45 is a silver infused glass sphere. Acts as a conductive filler. Exhibits very low density with a crush strength of >8,000 psi. It is designed to resist oxidation and cost effectively improve... view more

CSF250 is a conductive synthetic flake infused with pure silver. Acts as a filler. It has an adjustable specific gravity and density and exhibits exceptional depth and conductive properties. It can... view more

Blocked sulfonic acid. Acts as a catalyst. Provides wrinkle finishes when used in polyester resin based powder coating formulations in combination with a monomeric tetramethoxymethyl glycoluril... view more

Actiron® DBT by Protex is dibutyl tin laurate absorbed on a silica carrier. Acts as a catalyst for helping the cross-linking of polyester and polyurethane powder coating based on aliphatic... view more

Actiron® NX 458 by Protex acts as a non-labelled amine blocked DDBSA based catalyst for stoving systems. It is suitable for water-based and solvent-based coatings and printing inks. Actiron® NX 458... view more

Actiron® NX 91 P by Protex is a tertiary amine. It acts as a latent catalyst for epoxy, hybrid and polyurethane (PU) systems. Actiron® NX 91 P is suitable for use in powder coatings... view more

Actiron® NX3 by Protex is a 2-4-6 tris (dimethyl aminomethyl) phenol. Acts as a catalyst. Suitable for use in epoxy coatings... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Used in road marking paint and... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Used in hydraulic coating for... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Used in road marking paint and... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Used in matt paint and hydraulic... view more

Calcium carbonate. Can improve opacity or whiteness, act on the viscosity of finished products and offer low abrasiveness as well as an average specific weight. Used in hydraulic coating for... view more

Provichem® 2511 Eco by Proviron is a bio-based dimethyl succinate (DMS). It is a non-toxic solvent suitable for aquatic organisms. Acts as a coalescing agent for emulsion paints in low VOC coating... view more

JT-R100 by Puyang Jiteng Chemical is low odor C5 hydrocarbon resin with narrow molecular weight distribution. It is obtained from polymerizing C5 fraction, by-product of ethylene derived from the... view more

Dark Color C9 Hydrocarbon Resin (100) by Puyang Tiancheng Chemical is a C9 hydrocarbon resin. It acts as an adhesion promoter. It is a petroleum by-product of ethylene made of C9 fraction which is... view more

Dark Color C9 Hydrocarbon Resin (110) by Puyang Tiancheng Chemical is a C9 hydrocarbon resin. It is a petroleum by-product of ethylene made of C9 fraction which is produced by pre-treatment... view more

Dark Color C9 Hydrocarbon Resin (120) by Puyang Tiancheng Chemical is a C9 hydrocarbon resin. It acts as an adhesion promoter. It is a petroleum by-product of ethylene made of C9 fraction which is... view more

HCR-P110F by Puyang Tiancheng Chemical is an alkylated aromatic hydrocarbon resin. It exhibits good solubility because of its aromatic property. It is recommended for ink applications to enhance... view more

Light Color C9 Petroleum Resin (100) by Puyang Tiancheng Chemical is a C9 hydrocarbon resin. It is a petroleum by-product of ethylene made by C9 fraction which is produced by pre-treatment... view more

Flame retardant, intumescent powder. Added to water using a high-shear mixer followed by addition of the latex to the slurry to prepare intumescent coatings. The amount of powder added to the... view more

Flame retardant, intumescent powder. Added to water using a high-shear mixer followed by addition of the latex to the slurry to prepare intumescent coatings. The amount of powder added to the... view more

Q-RIT 118 by QR Polymers is an epoxy hardener. It shows a long gel time at ambient cure and high Tg if heat-cured. It is used in ambient curing paints for metal, concrete (industrial anti-corrosion... view more

Q-RIT 120 by QR Polymers is a hardener. It shows good heat-resistance properties. It is used in ambient curing paints for metal, concrete (industrial anti-corrosion paints, marine anticorrosive... view more

Q-RIT 122 by QR Polymers is a m-xylene diamine-based epoxy hardener. Used in ambient curing paints for metal, concrete and civil engineering applications. Recommended dosage level of Q-RIT 122 is 18... view more

Q-RIT 124 by QR Polymers is N-aminoethylpiperazine (N-AEP)-based hardener for epoxy resins. Used in paints for metal, concrete and civil engineering applications. It is also used in industrial... view more

Q-RIT 125 by QR Polymers is diethylenetriamine (DETA)-based hardener for epoxy resins. It is used in paints for metal or for concrete (industrial anticorrosion paints, marine anticorrosive primers... view more

Glyoxylic Acid 50% by Qingdao Guolin Environmental Technology is an eco-friendly, glyoxal-free crosslinking agent. It is used in varnishes and coatings... view more

Glyoxylic Acid 99% Monohydrate by Qingdao Guolin Environmental Technology is an eco-friendly, high-purity crosslinking agent. It is suitable for varnishes and coatings... view more

JADEWIN AN 1024 by Qingdao Jade New Material Technology is a 1,2-Bis (3,5-di-tert-butyl-4-hydroxyhydrocinnamoly) hydrazine. Acts as a metal deactivator and antioxidant. Exhibits extraction... view more

JADEWIN BP-1 by Qingdao Jade New Material Technology is a 2,4-dihydroxybenzophenone. Acts as a ultraviolet (UV) light absorber (280 – 320 nm range). Offers prevention of yellowing and improvement of... view more

JADEWIN BP-2 by Qingdao Jade New Material Technology is a 2,2',4,4'-tetrahydroxybenzophenone. Acts as a ultraviolet (UV) light absorber with wide absorption band (260nm-400nm) that extends far into the UV-A range. Prevents... view more

JADEWIN BP-3 by Qingdao Jade New Material Technology is a (2-hydroxy-4-methoxyphenyl)phenyl-methanon. Acts as a ultraviolet (UV) light absorber with wide absorption band (280 – 360 nm range). Improves the weatherability, is... view more

JADEWIN BP-4 by Qingdao Jade New Material Technology is a 2-Hydroxy-4-methoxybenzophenone-5-sulfonic acid. Acts as a ultraviolet (UV) light absorber with wide absorption band (280 – 360 nm range)... view more