Surfynol® DF-62 is an ether-modified, defoamer/ aerator by Evonik. Designed to provide a balance of excellent knockdown and sustained anti-foaming over time in a variety of water-borne formulations... view more

Surfynol® DF-70 by Evonik is an organic-based defoamer designed specifically for water-based formulations. It is used in coatings, flexographic flexible packaging and gravure publication ink... view more

SURFYNOL® DF-75 by Evonik is a mineral oil-free, non-silicone defoamer. It provides knockdown and sustained defoaming in a wide variety of water-based formulations. It is designed for pigment... view more

Surfynol® GA by Evonik is a blend of non-ionic surfactants designed as a grinding aid for organic pigments of mid-HLB range. It provides low foam pigment and substrate wetting. It rapidly wets out... view more

It is a 100% active, solvent-free, nonsilicone, liquid defoamer based on Gemini surfactant technology. Provides a combination of foam control and dynamic wetting, with the potential to reduce... view more

Escor™ 5000 by ExxonMobil Chemical is an ethylene acrylic acid copolymer. It is a very good adhesive polymer in film. Escor™ 5000 is primarily intended for extrusion coating and coextrusion coating... view more

Escor™ 5020 by ExxonMobil Chemical is an ethylene acrylic acid copolymer. Escor™ 5020 is is primarily intended for extrusion coating and coextrusion coating. Provides Very good adhesion to polar... view more

Escor™ 5050 by ExxonMobil Chemical is an ethylene acrylic acid copolymer. It is a very good adhesive polymer in film. Escor™ 5050 is primarily intended for extrusion coating and coextrusion coating... view more

Escor™ 5070 by ExxonMobil Chemical is an ethylene acrylic acid copolymer. It is characterized by high melt index and 9 wt% acrylic acid comonomer content. Escor™ 5070 combines easily processing and... view more

Escor™ 5100 by ExxonMobil Chemical is an ethylene acrylic acid copolymer. It is a very good adhesive polymer in film and excellent coextrusion adhesive resin for polyamides. Escor™ 5100 is primarily... view more

KESAOIL D70 supplied by FARRL is a deodorized (clear) epoxidized soybean oil (ESBO). It is used as a plasticizer with stabilizing properties. It offers a low migration (often comparable to polymeric... view more

KESAPLAST 8100 supplied by FARRL is an adipate (DEHA/DOA) used as plasticizer in PVC, plastisols, ethyl cellulose, polystyrene and rubber. It offers excellent cold elasticity, good electrical... view more

KESAPLAST 8400 supplied by FARRL is an epoxidized soya fatty acid ester. It is a green alternative to DINP, DOTP and polymeric plasticizers with a good low temperature resistance from 5°C up and a... view more

KESAPLAST 8500 supplied by FARRL is a dioctyl terephthalate (DOTP). It is used as a high molecular weight (monomeric) plasticizer. It offers an excellent plasticizing effect, excellent processing... view more

KESAPLAST 8810 ST supplied by FARRL is a stabilized C8/C10 trimellitate used as a plasticizer. This mixture of C8/C10 alcohols with a relatively higher molecular weight monomeric ester offers... view more

FP-440 by FP-Pigments is an unique opacity white pigment developed using FP-Pigments' patented technology. It can produce the most effective balance of spaced TiO2 and entrapped air within a... view more

21-4345 by Ferro is a Ni-free cobalt titanate green spinel pigment. It is opaque to visible light with moderate NIR reflectance ("cool" pigment). It exhibits ease of dispersion with excellent... view more

21-5801by Ferro is a Ni-free cobalt titanate green spinel pigment with a blueish shade. It exhibits ease of dispersion with excellent dimensional stability resulting in no warping or shrinkage. It... view more

21-5901 by Ferro is a Ni-free cobalt titanate green spinel pigment with a yellowish shade. It exhibits weather-, light-, acid-, alkali- and solvent fastness. It opaque to visible light with moderate... view more

Cool Colors® 10336 by Ferro is inorganic cobalt aluminium spinel pigment. It reflects the infrared light to a big extend and appears as intensely colored as comparable conventional pigments. It... view more

Cool Colors® 10406 by Ferro is an inorganic cobalt aluminium spinel brown shade pigment. It reflects the infrared light to a big extend and appears as intensely colored as comparable conventional... view more

SynPlast™ NOTM-PPC by GEON Performance Solutions is a non-phthalate plasticizer. It is tri (n-octyl) trimellitate. SynPlast™ NOTM-PPC exhibits low fogging, VOC and temperature resistance. It is... view more

Natural-oil based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance characteristics and it... view more

Natural-oil based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance characteristics and it... view more

Natural-oil based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance characteristics and it... view more

Natural-oil based primary plasticizer. It is cost competitive relative to conventional plasticizers and an excellent source of renewable carbon. Offers excellent performance characteristics and it... view more

Dioplex® 100 by Hallstar is polyester sebacate which acts as a high molecular weight polymeric plasticizer. It is compatible with nitrile and polyvinyl chloride. Its good heat resistance is beyond... view more

Dioplex® 171 by Hallstar is a mixed dibasic acid polyester that acts as a highly efficient, very easy-processing polymeric plasticizer. Used for low-viscosity plastisol coatings applications. It... view more

Dioplex® 195 by Hallstar is polyester adipate which acts as an excellent general-purpose plasticizer. It is compatible with polyvinyl chloride (PVC) and nitrile. Dioplex® 195 has a sweet slight odor at... view more

Dioplex® 214 LOW ACD by Hallstar is polyester adipate. Acts as a low to medium viscosity polymeric plasticizer. Its chemical composition and viscosity level have been designed to provide a slightly improved... view more

Dioplex® 925 by Hallstar is a biodegradable polyester adipate which acts as a low-viscosity polymeric plasticizer. Used in decorative/protective sheet applications. Dioplex® 925 is compatible with... view more

HEUCOSIN® Red G 14848 by Heubach is a red-colored lead chromate-free pigment preparation of organic/inorganic pigments and extenders. It offers excellent weather fastness and heat-, alkali-, & acid... view more

Acrylic polyol. It exhibits excellent performance towards mechanical- and chemical- resistance. Used in general purpose industrial- wood-, metal- and plastic- coatings... view more

Acrylic polyol. It exhibits excellent performance towards mechanical- and chemical- resistance. It achieves good levelling during spraying followed by ambient temperature or forced drying. Used in... view more

Acrylic polyol. It exhibits excellent performance towards mechanical- and chemical- resistance. It achieves good levelling during spraying followed by ambient temperature or forced drying. Used in... view more

Acrylic polyol. It is fast drying and has longer pot life. Used specially in wood coating and metal finishes... view more

Acrylic polyol. It exhibits excellent performance towards weather resistance, gloss and gloss retention having good mechanical & chemical properties in end use application as well as performance... view more

A-C® 1089 by Honeywell is a high melt temperature, lower viscosity, hard polypropylene (PP) homopolymer. Acts as an excellent internal lubricant. A-C® 1089 is used in paint coatings and inks... view more

A-C® 1172 is a hard polypropylene (PP) homopolymer by Honeywell. It exhibits high melt temperature and high viscosity. A-C® 1172 is used in paints, coatings and inks... view more

A-C® 1810A by Honeywell is a very low viscosity, medium density polyethylene (PE) homopolymer. Used in solvent borne coatings, and in heat-set and liquid solvent borne inks to improve mar and rub... view more

A-C® 316 by Honeywell is a hard, high drop point, high density, oxidized polyethylene homopolymer. Used in water borne coatings and inks, overprint varnishes and polishes to improve surface... view more

A-C® 316A by Honeywell is a hard, high density, oxidized polyethylene homopolymer with high drop point. Used in overprint varnishes, water borne coatings and inks and polishes to improve surface... view more

High-purity magnesium hydroxide. Represents a halogen free flame retardant with low smoke emission and high thermal stability up to 340°C. Used for coatings... view more

High-purity magnesium hydroxide. Represents a halogen free flame retardant with low smoke emission and high thermal stability up to 340°C. Used for Coated Fabric - PVC plastisols... view more

Pumpable aqueous suspension (slurry) of highly dispersed and finely precipitated aluminium hydroxide. Widely used as special pigments in the paper and board industry where whiteness, opacity... view more

Pumpable aqueous suspension (slurry) of highly dispersed and finely precipitated aluminium hydroxides. Widely used as special pigments in the paper and board industry where whiteness, opacity... view more

Aluminum trihydroxide. Acts as a filler, coating pigment and TiO2-extender for the paper and board industry... view more

Zinc barium sulfate (Zns. Baso4). It is an inorganic white pigment. Lithopone B301 is produced by precipitation through filtering, heating and quenching. It is much cheaper but still it is mostly... view more

Zinc barium sulfate (Zns. Baso4). It is an inorganic white pigment. Lithopone B311 is produced by precipitation through filtering, heating and quenching. It is much cheaper but still it is mostly... view more

Aradur® 100 PP 77.5 by Huntsman Advanced Materials is a polyamidoamine dissolved in n-propanol. Acts as a curing agent. It is free from benzyl alcohol and is compatible with solid epoxy resin... view more

Aradur® 100 X 60 by Huntsman Advanced Materials is a polyamidoamine dissolved in xylene. Acts as a curing agent. It is free from benzyl alcohol and is compatible with solid epoxy resin. Aradur® 100... view more

Aradur® 100 XM 60 by Huntsman Advanced Materials is a polyamidoamine dissolved in xylene/ methoxypropanol (4:1). Acts as a curing agent. It is free from benzyl alcohol and is compatible with solid... view more

Aradur® 115 X 70 by Huntsman acts as a curing agent. It is a polyamidoamine dissolved in xylene. It is free from benzyl alcohol and is compatible with solid epoxy resin. Aradur® 115 X 70 is... view more

Aradur® 115-2 by Huntsman acts as a curing agent. It is a standard, high-molecular weight polyamide. Aradur® 115-2 is suitable for use in combination with type 1 epoxy resins for industrial... view more