FOMREZ® 8066-72 by Lanxess is poly(diethylene/ethylene adipate/isophthalate) glycol. It is a hydroxyl terminated saturated linear polyester. FOMREZ® 8066-72 is used in production of coatings to... view more

FOMREZ® 8166-74 by Lanxess is poly(hexamethylene adipate/isophthalate) glycol. It is a hydoxy terminated saturated linear polyester. FOMREZ® 8166-74 is used in production of coatings to protect the... view more

FOMREZ® C24-53U by Lanxess is a blend of ethylene glycol and polybutylene glycol. It is hygroscopic and a hydroxyl terminated saturated linear polyester. FOMREZ® C24-53U is used in production of... view more

FOMREZ® F15-175 by Lanxess is a blend of diethylene glycol adipate and neopentyl glycol adipate. FOMREZ® F15-175 is used in production of coatings to protect the surface of floors, leather and... view more

FOMREZ® I24-112 by Lanxess is a blend of ethylene glycol adipate and butylene glycol adipate. FOMREZ® I24-112 is used in production of coatings to protect the surface of floors, leather and... view more

Methacrylate. It is a monofunctional monomer and is a colorless clear liquid with fruity odor. It is used in manufacture of paints & coatings... view more

2-Methyl 2-Propenoic Acid. It is a monofunctional monomer and is a colorless liquid with acrid, pungent odor. It is used in manufacture of paints & coatings... view more

2-Methyl-2-Propenoic Acid. It is a monofunctional monomer and is a colorless liquid with characteristic strong, acrid odor. It is used in manufacture of paints and coatings... view more

Blend of methyl methacrylate and 2-ethylhexyl methacrylate. It is a monofunctional monomer and is a colorless liquid with characteristic strong, acrid odor. It is used in manufacture of paints &... view more

Blend of methyl methacrylate and ethyl acrylate. It is a monofunctional monomer and is a colorless liquid with characteristic strong and acrid odor. It is used in manufacture of paints & coatings... view more

1,4-Butanediol. It is noncorrosive, colorless, high-boiling point liquid. Soluble in water, most alcohols, esters, ketones, glycol ethers and acetates, but may be immiscible or partially miscible in... view more

2-Methyl-1,3-Propanediol. Provides very good balance of tensile strength, elongation and flexibility. Exhibits very good blister resistance and good weather ability. Used for coatings... view more

Propylene glycol. It is a colorless, odorless and slightly viscous liquid... view more

Vinyl acetate. It is a chemical building block used to manufacture a wide variety of industrial products, including paints and coatings for flexible substrates. It is also a key raw material for the... view more

Acrylic polyol. Offers versatility, low VOCs, hardness and flexibility, long pot life, fast through cure, excellent weather ability, chemical resistance. Used in general metal, transportation and... view more

Soybean oil polyol. It is a difunctional monomer and an exceptional, sustainable alternative to traditional petroleum products. Has higher reactivity, lower color and less steric hindrance... view more

Honey bee™ HB-230 Polyol by MCPU Polymer Engineering is soybean oil polyol. Honey bee™ HB-230 Polyol is a difunctional monomer and an exceptional, sustainable alternative to traditional petroleum products. Has higher reactivity, lower color... view more

Diethylene Glycol (DEG) by MEGlobal is a low-volatile, low viscous and hygroscopic liquid. Under normal conditions, it has no detectable odor, however, under high vapor concentrations, a slightly... view more

Ethylene Glycol Polyester is ethanediol by MEGlobal. It is a polyester polyol and a diol. It is an odorless, syrupy liquid with a sweet taste. It augments the capabilities to include applications... view more

UVP 0101 99 by MPD Industries is a 2-phenoxy ethylacrylate (2-PHEA). Exhibits low viscosity and good solvency. It is a UV curable clear liquid... view more

UVP 0102 99 by MPD Industries is a UV curable octyl decyl acrylate (ODA). This clear liquid exhibits low viscosity and good solvency... view more

UVP 0103 99 by MPD Industries is a UV curable 2-hydroxy phenoxy propylacrylate (HPPA). This clear liquid possesses low viscosity and good solvency... view more

UVP 0104 99 by MPD Industries is a UV curable iso bornyl acrylate (IBOA). This clear liquid possesses low viscosity and good solvency... view more

UVP 0201 99 by MPD Industries is a UV curable tripropylene glycol diacrylate (TPGDA). This clear liquid has a low draize rating. Offers good cure speed and flexibility... view more

Polyol, based on palm oil. Used in the manufacture of polyurethane... view more

Polyol, based on palm oil. Used in the manufacture of polyurethane... view more

Formulated polyether polyol. It is CFC free and eco-friendly. It is to be used in combination with polymeric MDI. Recommended for the production of polyurethane. HCFC 141b should be blended with it... view more

Formulated polyether polyol. It is CFC free and eco-friendly. It is to be used in combination with polymeric MDI. Recommended for the production of polyurethane. HCFC 141b should be preblended with... view more

Formulated polyether polyol. It is CFC free and eco-friendly. It contains fire retardant. It is to be used in combination with polymeric MDI. Recommended for the production of polyurethane foams for... view more

Formulated polyether polyol. It is CFC free and eco-friendly. It contains fire retardant. It is to be used in combination with polymeric MDI. Recommended for the production of polyurethane. HCFC... view more

Formulated polyether polyol. It is CFC free and eco-friendly. It contains fire retardant. It is to be used in combination with polymeric MDI. Recommended for the production of polyurethane... view more

2-Hydroxyethyl vinyl ether. Used in UV-curing-coating and production of polymer and oligomer (by radical copolymerization and cationic polymerization)... view more

4-Hydroxybuthyl vinyl ether. Used in UV-curing-coating and production of polymer and oligomer (by radical copolymerization and cationic polymerization)... view more

Diethylenglyol mono vinyl ether. Used in UV-curing-coating and production of polymer and oligomer (by radical copolymerization and cationic polymerization)... view more

Polyacrylate HDDA by Millstone Durbax is a difunctional reactive monomer used as a crosslinking component in UV & EB energy curable systems. It is a light-colored grade with low viscosity for free... view more

Polyacrylate PETA by Millstone Durbax is a light-colored trifunctional monomer with hydroxyl functionality. It provides good film hardness, adhesion and scratch resistance properties. It is... view more

Polyacrylate TMPTA by Millstone Durbax is a light-colored & low viscosity trifunctional monomer used as a crosslinking component in energy curable systems. It also acts as a reactive diluent. It... view more

2-Ethyl hexanol by Mitsubishi Chemical is a polyol monomer with 8-carbon higher alcohol species. 2-Ethyl hexanol has very low-level of impurities and may be used as a raw materials for a wide variety of chemicals... view more

Acrylic Acid 100% by Mitsubishi Chemical is an acrylic acid. It is a monoacid & a monofuctional monomer and is made by the direct oxidation of propylene. Acrylic Acid 100% is a raw material for... view more

Acrylic Acid 80% by Mitsubishi Chemical is an acrylic acid. It is a monoacid & a monofuctional monomer made by the direct oxidation of propylene, also by diluting acrylic acid with water in 8:2... view more

Butyl Acrylate. It is a monofuctional acrylate monomer and is an ester of acrylic acid and n-butanol. It has very low-level of impurities and acts as a raw material for a wide variety of chemicals... view more

Ethyl Acrylate. It is a monofuctional acrylate monomer and is an ester of acrylic acid and ethanol. It has very low-level of impurities. It may be used as a raw material for a wide variety of... view more

2, 2'-Bis (3-aryl-4-hydroxyphenyl) propane. Acts as a monomer. It is an aromatic phenol. The polymer made from BPA-CA offers flexibility, shock resistance as well as excellent heat resistance. Also... view more

Aminobenzylamine (ABAm). Acts as a monomer. It is a raw material of special resins. ABAm is a liquid at room temperature, though it is an aromatic amine. So, it has an excellent reactivity and... view more

NBDA (Norbornane diamine) by Mitsui Chemicals is bicyclo [2.2.1] heptanebis (methylamine). It is an aliphatic diamine. It is a colorless and transparent low-viscosity liquid. Offers heat resistance... view more

STABiO™ D-370N by Mitsui Chemicals is a non-yellowing, aliphatic polyisocyanurates based on bio-based 1,5-pentamethylene diisocyanate (PDI). Possesses high NCO content and high biomass content... view more

TAKENATE™ 500 by Mitsui Chemicals is an aliphatic diisocyanate. Offers short tack-free time and hardness. Designed for coatings applications. TAKENATE™ 500 exhibits higher reactivity and better... view more

Miramer M101 by Miwon Specialty Chemical is caprolactone methacrylate. Used as a functional monomer in coatings and inks... view more

Miramer M121 by Miwon Specialty Chemical is a mono-functional aliphatic methacrylate. Offers good flexibility, solvent resistance, good adhesion, low shrinkage and hydrophobic characteristic. Used in coatings for... view more

Miramer M140 by Miwon Specialty Chemical is a mono functional aromatic acrylate. It offers good adhesion, flexibility and high refractive index. It is designed for coatings (metal, optical fiber, plastic, PVC floor)... view more

Miramer M142 by Miwon Specialty Chemical is phenol (ethoxylated)2 acrylate. It offers good adhesion and flexibility. Used as a functional monomer in coatings (for metal, optical fiber, plastic, PVC floor) and inks... view more

Miramer M150 by Miwon Specialty Chemical is a mono functional cyclic acrylate. Offers good adhesion. Miramer M150 is used in coatings for metal, optical, plastic, paper and inks (flexo, screen, offset, litho)... view more

Poly-A® 27-2000 is a polyether amine polyol. Used in elastomeric coatings... view more

Poly-G® 21-112 is a high molecular weight polyethene glycol (PEG). Offers high quality and reproducibility. Suitable for two-part, very high solid roof and deck coatings. Used in flexible urethane... view more

Myrinol™ HP 210 by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, polyurethane... view more

Myrinol™ HP 210 Flex by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, polyurethane... view more

Myrinol™ HP 310 by Myriant is made from renewable bio-succinic acid and is a cost effective high performance liquid polyol. It is designed for use in cast elastomers, polyesters, thermoplastic... view more

Myrinol™ HP 56 by Myriant is made from renewable bio-succinic acid and is a cost effective linear polyol. It is designed for use in polyesters, thermoplastic urethane, 2K urethane and polyurethane... view more

Denamer™ 1220 by Nagase Specialty Materials is a di-functional, new cycloaliphatic epoxy acrylate. The unique combination of its hydrogenated bisphenol A backbone and hydroxy groups gives strong... view more

1,6-hexanediol Di-acrylate. It is a bifunctional monomer and is a transparent colorless liquid. It has low viscosity & volatility. It shows good dilution and fast curing properties and is used in... view more

Carbitol acrylate;2-(2-ethoxyethoxy)ethyl prop-2-enoate. It is a UV curing monomer and is a transparent colorless liquid. It possesses good flexibility, good dilution, low skin irritation and high... view more

Dipentaery thritol Hexaacrylate. It is a multifunctional monomer and is a transparent colorless liquid. It has low viscosity & volatility, shows high reaction activity and a good dilution. It is... view more

Dipropylene Glycol Diacrylate. It is a bifunctional monomer and is a transparent colorless liquid. It shows good dilution, is fast curing and has low viscosity & low volatility. It is applicable in... view more

Ditrimethylolpropane Tetraacrylate. It is a multifunctional monomer and is transparent colorless liquid. It has low viscosity & volatility and is fast curing. It is used in printing inks... view more

Blended polyol. It is a light yellow, transparent liquid composed of fine cells and high closed cell content. Exhibits good flowability, homogeneous density distribution, high compressive strength... view more

Blended polyol. It exhibits very short demold time and good dimensional stability. Shows both high and low pressure foaming. Compatible with polyurethane. Recommended formulation is 100 pbw (parts... view more

Blended polyol. It is a light yellow, transparent viscous liquid composed of fine cells and high closed cell content. Exhibits flame retardance, short demold time, good flowability, homogeneous... view more

Blended polyol. It is a yellow viscous liquid. Exhibits low initial K-factor, low mold density and good dimensional stability. Suitable for use in both high and low pressure foaming machines... view more

Blended polyol. It is a light yellow, transparent viscous liquid composed of fine cells and high closed cell content. Exhibits flame retardance, short demold time, good flowability, homogeneous... view more

NJLUB CM-12 is a lauryl methacrylate by New Japan Chemical. It is used for paint resin modifiers. It also acts as a lubricant. NJLUB CM-12 offers enhanced viscosity index, adjusted pour point and... view more

NJLUB CM-275 is a lauryl methacrylate by New Japan Chemical. It is suitable for paint resin modifiers. It also acts as a lubricant. NJLUB CM-275 offers enhanced viscosity index, adjusted pour point... view more

2-Hydroxyethyl acrylate. It is a methacrylic hydroxy monomer and is clear liquid in appearance. Suitable for use in paints... view more

2-Hydroxyethyl methacrylate. It is a methacrylic hydroxy monomer and is clear liquid in appearance. Suitable for use in paints and printing inks... view more

2-Hydroxypropyl acrylate. It is a methacrylic hydroxy monomer and is clear liquid in appearance. Suitable for use in paints... view more

2-hydroxypropyl methacrylate. It is a methacrylic hydroxy monomer and is clear liquid in appearance. Suitable for use in paints... view more

2-(2-Vinyloxyethoxy)ethyl methacrylate. It is a colorless liquid. It has polymerizable groups such as radical polymerizable (meth)acryloyl group and cationic polymerizable vinyl ether group... view more

Branched, solvent-free castor oil-based polyol emulsion. It is a micro-emulsion and offers very good flowing properties in combination with extremely long storage stability. It enables the use of... view more

Branched castor oil based polyol. It exhibits high shore D hardness stability against hydrolysis, UV- and chemical resistance. It is hydrophobic, has high reactivity, high viscosity and good... view more

Branched, solvent-free castor oil-based polyol. It has high reactivity, high hydroxyl content, good adhesive properties, low viscosity and is hydrophobic. It exhibits high shore D hardness and... view more

Branched, solvent-free castor oil-based polyol. It has high reactivity, high hydroxyl content, good adhesive properties, low viscosity and is hydrophobic. It exhibits high shore D hardness and... view more

Solvent-free aromatic diluent polyol. It is hydrophobic and lowers the viscosity. Used in manufacture of coatings... view more

ADICROL AP 210 by Nord Composites is an aliphatic polyester polyol. It has linear structure and contains MPG as main glycol. ADICROL AP 210 is recommended for the manufacturing of pigment paste... view more

ADICROL BN 112 by Nord Composites is an aliphatic polyester polyol with 1,4-BDO, NPG as main glycol. It is linear in structure and is recommended for polyurethane (PU) coatings. ADICROL BN 112 exhibits very good... view more

ADICROL BN 56 by Nord Composites is a linear structure, aliphatic acid/anhydride, polyester polyol with 1,4-BDO NPG as main glycol. ADICROL BN 56 has good hydrolysis resistance, very good physical & mechanical... view more

ADICROL LD 40 by Nord Composites is an aliphatic acid/anhydride, linear structure polyester polyol with DEG as main glycol. It is used for the production of polyurethane (PU) coating. ADICROL LD 40 has... view more

ADICROL LD 56 by Nord Composites is a linear structure aliphatic acid/anhydride, polyester polyol with DEG as main glycol. It is recommended for the production of polyurethane (PU) in solution for coating... view more

C10 Fraction Non-hydrogenated by ORLEN Unipetrol is a hydrocarbon fraction, produced as a by-product of hydrocarbon pyrolysis via steam cracker process. It is used in the production of hydrocarbon... view more

RADIA 7285 by Oleon is a Polyester polyol. It is an amorphous, pale yellow colored viscous liquid. RADIA 7285 exhibits hydrophobicity, flexibility and elongation in coatings... view more

RADIA 7286 by Oleon is a Polyester polyol. It is an amorphous viscous liquid. RADIA 7286 exhibits hydrophobicity, flexibility, tensile strength and hydrolytic resistance in coatings... view more

RADIA 7287 by Oleon is a Polyester polyol. It is an amorphous, viscous, yellow colored liquid. RADIA 7287 exhibits hydrophobicity, flexibility and elongation and is ideal for polar substrates for... view more

Polyether polyester vegetable polyol. Exhibits hydrophobicity and low viscosity. Is an amorphous, clear liquid. Suitable for prepolymers... view more

RADIANOL 1990 by Oleon is a Dimer diol. It is a clear liquid, poorly soluble in water but soluble in organic solvents. RADIANOL 1990 acts as a polymer building block for coatings’ applications... view more

It is made of polyolic component Petol C 2106 and diphenyl methane-di isocyanate (crude MDI). Polyolic component Petol C 2106 is a mixture of polyols with catalyzer, fire-proofing agent, water and... view more

Polyether polyol. It is a yellow-brown viscous clear liquid. Used for the production of coatings... view more

Polypropoxylated p-nonyl phenol formaldehyde-diethanolamine based on mannich. It is an odorless polyether polyol. Used in polyol blends to obtain rigid foams blown with water for pipe insulation and... view more

Polypropoxylated phenol-formaldehyde-diethanolamine based on mannich. It is a highly reactive polyether polyol. PETOL PM® 500-3F is an odorless yellow-brown clear viscous liquid. Used for spray... view more

Polyether polyol. It is a non-reactive polymer polyol with about 10% solid substance. Used for manufacturing coatings... view more

Vinyl [tris-(2-methoxyethoxy) silane]. It is a colorless or light yellow liquid. Easily dissolves in water because of its ether structure. Suitable for use in paints... view more

Rokopol® D1002 by PCC Group is a combination of polyoxypropylenediol and polyether polyol. It contains butylated hydroxytoluene (BHT)-free antioxidants. This product by PCC Group is a homogeneous... view more

Rokopol® D2002 by PCC Rokita is a combination of polyether polyol and polyoxypropylenediol. This homogeneous clear liquid contains butylated hydroxytoluene (BHT) free antioxidants. Rokopol® D2002 is... view more

Rokopol® D450 by PCC Rokita is a combination of polyether polyol and polyoxypropylenediol. This homogeneous clear liquid contains butylated hydroxytoluene (BHT)-free antioxidants. Rokopol® D450 by... view more

Rokopol® DE320 by PCC Group is a combination of polyether polyol and reactive polyoxyalkylated polyether polyol based on propylene glycol. It contains butylated hydroxytoluene (BHT)-free... view more

Rokopol® DE4020 by PCC Group is a reactive polyoxyalkylated polyether polyol based on propylene glycol. It contains an advanced BHT free antioxidants. Rokopol® DE4020 by PCC Group is chemically... view more

PIOTHANE® 3500 EAT by Panolam Industries International is a liquid polyol grade. It exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low color and low reactive by-products. Used in polyurethane based... view more

PIOTHANE® 5500 EHNA, manufactured by Panolam Industries International, is a liquid polyol grade. It exhibits excellent lot-to-lot consistency, flexibility, excellent clarity, low color and low... view more

2-Ethylhexanol by Perstorp is polyol with one primary hydroxyl group. It finds application in formulating coatings. It is REACH compliant and TSCA listed... view more

2-Ethylhexanol Pro 100 by Perstorp is a 100% renewable carbon-based, pro-environment polyol with one primary hydroxyl group. It is suitable for formulating paint applications. It is designed to reduce the... view more

2-Ethylhexanol Pro 25 by Perstorp is polyol with one primary hydroxyl group. It is a pro-environment, renewable drop-in replacement for fossil-based 2-Ethylhexanol, according to a traceable mass... view more

Boltorn™ H2004 by Perstorp is dendritic polymer building block with 6 primary hydroxyl groups. It has a highly branched flexible backbone. It is a viscous liquid at room temperature. Offers unique... view more

Boltorn™ H311 by Perstorp is a dendritic polymer polyol with highly branched flexible backbone with a large number of primary hydroxyl groups. It provides exceptional compressive load-building... view more