n-Dodecyl acrylate is a light colored liquid. It forms hydrophobic polymers soluble in hydrocarbons. It complies with TSCA regulation... view more

It is a clear mild liquid. It is used in preparation of hydrophobic polymers. It complies with TSCA regulation... view more

n-Hexyl acrylate. It is a hydrophobic, low Tg ester monomer. It complies with TSCA regulation... view more

n-Octyl methacrylate. It is a clear colorless liquid. It complies with TSCA regulation... view more

n-Propyl acrylate is a colorless liquid monomer. It complies with TSCA regulation... view more

Polycross® FC by Polysistec is a blocked methylene diphenyl diisocyanate (MDI) monomer. Polycross® FC is a crosslinking agent. Used in coatings... view more

Polycross® FX by Polysistec is a blocked toluene diisocyanates (TDI) monomer based crosslinker. Polycross® FX is used in coatings... view more

Polycross® TBI by Polysistec is a blocked hexamethylene diisocyanates (HMDI) monomer. Polycross® TBI is used as a crosslinking agent in coatings... view more

Polycross® TBI 50 by Polysistec is a crosslinking agent. It is based on blocked hexamethylene diisocyanates (HMDI) monomer. Polycross® TBI 50 is used in coatings... view more

Polycross® TP by Polysistec is a blocked hexamethylene diisocyanates (HMDI) based crosslinking agent. Polycross® TP is used in coatings... view more

RU-1100K by Procachem is a polyester polyol resin. Exhibits low temperature property, good flexibility and resiliency. Suitable for use in polyurethane coatings... view more

RU-1120 by Procachem is a polyester polyol resin. Exhibits low crystallization and good resiliency. It is a clear liquid. Suitable for use in polyurethane coatings... view more

RU-1200 by Procachem is a polyester polyol resin. Exhibits mechanical strength and good resiliency. It is a waxy solid. Suitable for use in polyurethane coatings... view more

RU-1300 by Procachem is poly(1,2-propylene adipate). This polyol is a saturated hydroxyl terminated linear polyester. Exhibits excellent low temperature properties, high mechanical strength, good... view more

RU-1400-H28 by Procachem is poly(1,4-butylene adipate). This polyol is a saturated hydroxyl terminated linear polyester. Exhibits excellent low temperature properties, high mechanical strength, good... view more

Polyol C 20A is a triol polyol. Used in paints and coatings... view more

Polyol C 5B is a triol polyol. Used in paints and coatings... view more

Polyol Cs 20 is a triol polyol. Used in paints and coatings... view more

Polyol Cs 20B is a triol polyol. Used in paints and coatings... view more

Polyol R 20B is a triol polyol. Used in paints and coatings... view more

Aromatic polyester polyol. It is a diethylene glycol-phtalic anhydride based polyester polyol. It is soluble in acetone & ethyl acetate and can be hydrolyzed in water... view more

Saturated polyester polyol. It is soluble in acetone & ethyl acetate and can be hydrolyzed in water. Used in production of polyurethane elastomers... view more

Aromatic polyester polyol. It is a diethylene glycol-phtalic anhydride based polyester polyol. It is soluble in acetone & ethyl acetate and can be hydrolyzed in water... view more

Aromatic polyester polyol. It is soluble in acetone & ethyl acetate and can be hydrolyzed in water. Used in polyurethane spray systems... view more

Aromatic polyester polyol. It is a diethylene glycol-phtalic anhydride based polyester polyol. It is soluble in acetone & ethyl acetate and can be hydrolyzed in water... view more

Acidic methacrylate. Possesses excellent adhesion... view more

Acidic methacrylate. It has low color, low viscosity and good adhesive property... view more

Acidic acrylate. It has low color, low viscosity and good adhesive property... view more

Qualicure™ GC1100Y by Qualipoly Chemical is a reactive amine synergist. It is a UV/EB curable oligomer with outstanding characteristics such as low toxicity and rapid curing speed. Offers fast cure... view more

Reactive amine synergist. It has low yellowing and low bleeding. Its recommended addition level is 15-20%... view more

Polyol. It has low viscosity. It is sucrose and glycerin initiated. Its average molecular weight is 731... view more

Polyol. It has low viscosity. It is sucrose and diethylene glycol initiated. Its average molecular weight is 783... view more

Polyol. It has low viscosity. It is sucrose and diethylene glycol initiated. Its average molecular weight is 561... view more

Polyol. It is sucrose amine initiated. Its average molecular weight is 487. It has medium viscosity... view more

Triol polyol. It is amine initiated. Its average molecular weight is 280. It improves flowability... view more

Test IE11 TMPTMA is an acrylate monomer. It is a clear liquid... view more

Trimethylolpropane triacrylate is an acrylate monomer. It is a clear liquid... view more

Tetrahydrofurfuryl acrylate. It has low viscosity, good hardness, is polar and heterocyclic. Suitable for plastic coating, flexo inks and screen inks. It complies with following regulations: REACH... view more

Cyclic trimethylol-propane formal acrylate. It has low viscosity, good hardness, is polar and heterocyclic. Suitable for wood coating, plastic coating, flexo inks and screen inks. It complies with... view more

4-tert-Butylcyclohexyl acrylate. It has high Tg, good cutting power, high hardness and toughness. Suitable for plastic coating, flexo inks and screen inks. It complies with following regulations:... view more

Isobornyl acrylate. Offers good cutting power, adhesion and moisture resistance. It has high glass transition temperature and good flexibility. Recommended for flexo inks, screen inks, overprint... view more

Dihydrodicyclopentadienyl acrylate. It has very high glass transition temperature, high hardness, good adhesion and moisture resistance. Can be used in plastic coatings... view more

AROLON® 5900 by Reichhold (Polynt) is an acrylic polyol emulsion designed to be reacted with polyisocyanate. It is a hand mixable product for easy dispersion. Exhibits high gloss, high distinctness... view more

AROLON® 6473 by Reichhold (Polynt) is a fast-dry acrylic polyol resin. Exhibits outstanding UV durability, excellent chemical resistance and excellent flexibility & impact resistance, excellent... view more

UROTUF® L62-G8W-40 by Reichhold (Polynt) is a dispersion of hydroxy function aliphatic urethane polymer provided in a blend of dipropylene glycol dimethyl ether and water. It is N-methyl... view more

Aqueous solution of zinc acrylate. Dymalink® 664 by Resin Solutions enhances the performance of aqueous coatings. It can be incorporated into water-based resins and cure activated water-soluble peroxides... view more

Resinate® A0351-12 by Resinate Materials Group is a developmental solid crystalline polyol. Exhibits excellent green strength and excellent water- & chemical resistance. It is a light amber colored... view more

Resinate® A0352-73 by Resinate Materials Group is a high-performance developmental solid & strong crystalline polyol. Exhibits excellent green strength and excellent water- & chemical resistance... view more

Resinate® A0353-75 by Resinate Materials Group is a multi-purpose polyol. Exhibits balanced developmental solid semi-crystalline and amorphous phase, excellent green strength and excellent water- &... view more

Resinate® A2551-100 by Resinate Materials Group is a developmental polyol made with 99.9% recycled and renewable content. Exhibits long pot life, low viscosity, excellent- water, chemical, high... view more

Resinate® A2552-100 by Resinate Materials Group is a developmental polyol. Exhibits low viscosity and good chemical resistance. Offers superior adhesion performance on plastic and metal substrates... view more

FANCRYL® FA-511AS by Resonac (formerly Showa Denko) is dicyclopentanyl methacrylate monomer. It possesses hardness, hydrophobic properties, high glass transition temperature (Tg), good reducibility and good adhesiveness. This... view more

FANCRYL® FA-512AS by Resonac (formerly Showa Denko) is dicyclopentanyl methacrylate monomer. It possesses hardness, hydrophobic properties, high glass transition temperature (Tg), good reducibility and good adhesiveness. This... view more

FANCRYL® FA-512M by Resonac (formerly Showa Denko) is dicyclopentanyl methacrylate monomer. It possesses hardness, hydrophobic properties, high glass transition temperature (Tg), good reducibility and good adhesiveness. This... view more

FANCRYL® FA-512MT by Resonac (formerly Showa Denko) is dicyclopentanyl methacrylate monomer. It possesses hardness, hydrophobic properties, high glass transition temperature (Tg), good reducibility and good adhesiveness. This... view more

FANCRYL® FA-513AS by Resonac (formerly Showa Denko) is dicyclopentanyl methacrylate monomer. It possesses hardness, hydrophobic properties, high glass transition temperature (Tg), good reducibility and good adhesiveness. This... view more

{product] by Roehm is a rapidly curing methacrylic resin. Its rapid curing (even at temperatures as low as -30°C) ensures very short interruptions in routine operations. It is suitable for high... view more

DEGADUR® 165 by Roehm is a rapidly curing methacrylic resin. Its rapid curing (even at temperatures as low as -30°C) ensures very short interruptions in routine operations. It is used for high... view more

DEGADUR® 332 by Roehm is a rapidly curing methacrylic resin. Its rapid curing (even at temperatures as low as -30°C) ensures very short interruptions in routine operations. It is used for elastic... view more

DEGADUR® 418 by Roehm is a rapidly curing methacrylic resin. Its rapid curing (even at temperatures as low as -30°C) ensures very short interruptions in routine operations. It is designed for... view more

DEGADUR® 526 was earlier part of Evonik Industries and is now part of Roehm. product} by Roehm is a rapidly curing methacrylic resin. It is suitable for industrial and commercial floor... view more

BIOSUCCINIUM® by Roquette is a sustainable succinic acid. It is produced from renewable, plant-based resources which are converted via a unique low pH yeast process, a biotechnology process. It... view more

POLYSORB® LP by Roquette is a high purity, recyclable, bio-based isosorbide available in liquid form. Offers enhanced optical properties, temperature resistance, UV resistance and surface hardness... view more

POLYSORB® PA by Roquette is a high purity, bio-based isosorbide grade available in the form of pellets. Offers enhanced optical properties, temperature resistance, UV resistance and surface hardness... view more

POLYSORB® PSA by Roquette is a high purity, recyclable, bio-based, versatile isosorbide grade. Offers enhanced optical properties, temperature resistance, UV resistance and surface hardness. It is... view more

POLYSORB® PBA by Roquette Isosorbide is isosorbide grade available in the form of pellets/ flakes. It is produced from sustainable and renewable feedstock and offers excellent reactivity. POLYSORB®... view more

EA- 1200 by Royal Gent is an epoxy acrylate oligomer obtained from modified soy bean oil. EA- 1200 by Royal Gent exhibits 3 as the functionality, good flexibility and hardness on steel sheets... view more

EA- 2200 by Royal Gent is an epoxy acrylate oligomer with 2 functionality. EA- 2200 by Royal Gent exhibits high gloss, good reactivity and hardness on PC (polycarbonate) and iron substrates... view more

EA- 2280 by Royal Gent is an epoxy acrylate oligomer with 2 functionality. EA- 2280 by Royal Gent exhibits low viscosity, good adhesion, good reactivity and hardness on PC (polycarbonate) and iron... view more

1,6 Hexanediol diacrylate. It has good solubility, good adhesion, low viscosity and fast cure... view more

Isobornyl acrylate. It has excellent adhesion toughness and abrasion resistance... view more

1,3,5-cyclohexatriene. It contains no free acid. It is the starting point for many derivatives required in the production of a wide range of goods. Benzene and ethylene are used to produce styrene... view more

Buta-1,3-diene. Acts as a monomer. It is a highly reactive flammable, colorless gas with a mild aromatic odor. It is soluble in alcohol and ether but insoluble in water. BUTADIENE polymerizes... view more

Decene-1 (C10). It is a colorless liquid. Used in the production of polyalphaolefins, polyol ester, plasticizer alcohols, epoxides and other derivatives... view more

Ethene. Acts as a monomer. It is a non-toxic, non-corrosive, colorless gas with very little odor. ETHYLENE burns readily in the presence of oxygen with a luminous flame. Used in the production of... view more

Octene-1 (C8). It is a colorless liquid. It can be used as a co-monomer in the production of low-density polyethylene as well as in the production of plasticizer alcohols and other derivatives... view more