Photomer® 4017 by IGM Resins is hexanediol diacrylate (HDDA) and low viscosity diluent. It possesses moderate shrinkage profile and outstanding solvency characteristics with high viscosity urethane and... view more

Photomer® 4017 LT by IGM Resins is hexanediol diacrylate (HDDA) and low viscosity diluent. It possesses moderate shrinkage profile and outstanding solvency characteristics with high viscosity urethane and... view more

Photomer® 4017 TF by IGM Resins is a toluene free monomer and low viscosity diluent. It possesses moderate shrinkage profile and outstanding solvency characteristics with high viscosity urethane and epoxy... view more

Photomer® 4028 by IGM Resins is ethoxylated bisphenol A monomer. It exhibits moderately low viscosity, excellent cure speed and low irritancy. It offers good adhesion, scuff and abrasion resistance... view more

Photomer® 4034 by IGM Resins is a caprolactone modified version of HEA. By incorporating 2 moles of caprolaptone per mole of HEA, the resultant hydroxyl acrylate is again an ideal capting agent for UV... view more

It is a branched polyol containing both ether and ester group in the molecular backbone, and supplied as clear-hazy amber liquid. Alongside the appropriate crosslinker, it can be formulated as 2-K... view more

It is a branched polyol containing both ether and ester group in the molecular backbone, and supplied as clear-hazy amber liquid. Alongside the appropriate crosslinker, it can be formulated as 2-K... view more

It is a branched polyol containing both ether and ester group in the molecular backbone, and supplied as clear-hazy amber liquid. Alongside the appropriate crosslinker, it can be formulated as 2-K... view more

1,4-Butanediol. It is noncorrosive, colorless, high-boiling point liquid. Soluble in water, most alcohols, esters, ketones, glycol ethers and acetates, but may be immiscible or partially miscible in... view more

2-Methyl-1,3-Propanediol. Provides very good balance of tensile strength, elongation and flexibility. Exhibits very good blister resistance and good weather ability. Used for coatings... view more

Polytetramethylene ether glycol, diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. used in automotive, adhesives and Sealants, coatings... view more

Polytetramethylene ether glycol. Diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. used in automotive, adhesives and Sealants, coatings... view more

Polymeg® 650 POLYOL by LyondellBasell is polytetramethylene ether glycol. Diols produced through the polymerization of tetrahydrofuran, white, waxy solids at room temperature. Polymeg® 650 POLYOL is used in automotive... view more

1,10- Decanediamine by Mitsui Chemicals acts as a monomer. It is an aliphatic diamine. The epoxy resin made from this monomer has excellent wet resistance and mechanical properties. 1,10- Decanediamine is used in an epoxy... view more

1,12- Dodecanediamine. Acts as a monomer. It is an aliphatic diamine. The epoxy resin made from this monomer has excellent wet resistance and mechanical properties. Used in an epoxy curing agent... view more

1, 3-Bis (3-aminophenoxy) benzene, APB. Acts as a monomer. It is an aromatic ether diamine. The thermosetting resin made from APB has an excellent heat resistance and flexibility. Used in varnish... view more

1, 3-Bis (3-aminophenoxy) benzene, APB-N. Acts as a monomer. This aromatic ether diamine monomer is a raw material of thermosetting resin. Has an excellent heat resistance, lower cost than APB and... view more

1, 3-Bis (3-aminophenoxy) benzene, APB-NP. Acts as a monomer. This aromatic ether diamine is a raw material of thermosetting resin. Offers flexibility and good optical transparency at 365nm or over... view more

Polyester polyol dispersion. Exhibits very good gloss development and hardness. Used for industrial maintenance applications and specialty coatings for various substrates... view more

AROLON® 5900 by Reichhold (Polynt) is an acrylic polyol emulsion designed to be reacted with polyisocyanate. It is a hand mixable product for easy dispersion. Exhibits high gloss, high distinctness... view more

SABIC® STYRENE MONOMER (SM) by SABIC is a colorless to yellowish styrene monomer with a distinctive aromatic odor. It has a low vapor pressure and high refractive index. It is chemically reactive... view more

VCM (Vinyl Chloride Monomer) by SABIC is VCM monochloroethylene. It is a reactive gas with a faint odor. Under refrigeration, it is converted into liquid with a density of 0.91 gm/cc. VCM (Vinyl... view more

Acrylic oligomer. It is a bisphenol A (BPA)-free clear liquid. Matches coating properties of bisphenol-A diglycidyl ether diacrylate (BPADGE) oligomers as UV (ultraviolet)-cured coatings based on CN... view more

Acrylic oligomer. It is a bisphenol A (BPA)-free clear liquid. Exhibits high reactivity, very good hardness, scratch resistance and very good chemical resistance. Offers high gloss and good pigment... view more

Acrylic oligomer. It is a bisphenol A (BPA)-free clear liquid. Exhibits high reactivity, very good hardness, scratch resistance and very good chemical resistance. Shows good water resistance, high... view more

CN 966J75 by Sartomer (Arkema Group) is an aliphatic polyester based urethane diacrylate oligomer blended with 25% isobornyl acrylate. Offers high impact strength, excellent weathering and... view more

CN 975 by Sartomer (Arkema Group) is a high-functionality hexafunctional aromatic urethane acrylate oligomer. It shows excellent cure response and has low viscosity and very high crosslink density... view more

Phthalic Anhydride Flake by Stepan is a high purity dibasic anhydride produced by catalytic oxidation. Phthalic Anhydride Flake is used in the manufacture of alkyd resins for paints and protective... view more

Phthalic Anhydride Molten by Stepan is a high purity dibasic anhydride produced by catalytic oxidation. Phthalic Anhydride Molten is suitable for manufacture of alkyd resins for paints and... view more

STEPANPOL® PC-1011-45 by Stepan Company is a linear aliphatic polyester polyol. It is designed for polyurethane coatings. It imparts good solvent resistance and low-temperature properties... view more

STEPANPOL® PC-1011-55 by Stepan Company is a linear aliphatic polyester polyol. It is suitable for polyurethane coatings. It imparts good solvent resistance and low-temperature properties... view more

STEPANPOL® PC-1011P-110 by Stepan Company is a linear aliphatic polyester polyol. It offers good solvent resistance and low-temperature properties. STEPANPOL® PC-1011P-110 is designed for... view more

CYLINK® DOM (Dioctyl Maleate) by Syensqo is a reactive crosslinking and plasticizing monomer that may be copolymerized with other monomers such as styrene, vinyl acetate, EVA, PVC, and acrylates providing elasticity... view more

CYLINK® MBA Monomer (N,N’-Methylene Bisacrylamide) by Syensqo is an effective and versatile bi-functional methacrylate monomer. It acts as a crosslinking agent. CYLINK® MBA Monomer (N,N’-Methylene Bisacrylamide) is used in architectural coatings... view more

CYLINK® NH8 Wet Adhesion Monomer by Syensqo is a clear, reddish-brown, odorless proprietary functional monomer. It provides outstanding wet adhesion and wet scrub resistance at levels as low as 0.5% (phm). Does not... view more

Hydroquinone Extra Pure by Syensqo Hydroquinone. It is an aromatic organic compound with two hydroxyl groups. It is a synthesis intermediate for rubber. It is an extra pure grade... view more

Hydroquinone Premium by Syensqo is Hydroquinone. It is an aromatic organic compound with two hydroxyl groups. It is a synthesis intermediate for rubber... view more

Oleic acid. It is a non-animal, Kosher approved, low odor, tall oil fatty acid derived product having a uniform fatty acid composition and water-white initial color. Contains low saturated acids and... view more

Oleic acid (= 89%). It is an exceptionally high purity, low titer & low odor grade derived wholly from tall oil fatty acid source having uniform fatty acid composition and water-white initial color... view more

Pamolyn™ 150 Fatty Acid by Synthomer is a low odor fatty acid. It is derived wholly from a tall oil fatty acid source. Exhibits excellent color stability, low unsaponifiables and low titer point. It... view more

Pamolyn™ 200 Linoleic Acid by Synthomer is linoleic acid (9, 12-octanedecadienoic acid). It is of high purity, low odor and pale color with very low titer point. Derived wholly from a tall oil fatty acid source... view more

Linoleic acid (9, 12-octanedecadienoic acid). It is of high purity, low odor and pale color with very low titer point. Derived wholly from a tall oil fatty acid source. Exhibits high resistance to... view more

Bicyclo-[2.2.1] heptane (Synonyms: 2-Norbornylene, 2-Norbornene and Norcamphene). It is made by the Diels-Alder reaction of cyclopentadiene and ethylene, two readily available hydrocarbons. The... view more

Hexamethylene Diisocyanate (HDI) by Vencorex is aliphatic and used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD)... view more

Isophorone Diisocyanate (IPDI) by Vencorex is used in the chemical synthesis of aliphatic polyisocyanates and polyurethanes, such as aqueous dispersible polyurethane polymers (PUD) showing... view more

Scuranate™ T100 by Vencorex is a 2,4- toluene diisocyanate. Suitable for PU paints. It should be stored at temperatures around 25-30°C. Storage at higher temperatures can lead to discolouring and... view more

Scuranate™ T65 by Vencorex is a mixture of 2, 4-toluene diisocyanate (68%) and 2, 6-toluene diisocyanate (32%). It is an aromatic compound prepared after crystallization and separation of isomers... view more

Scuranate™ T80 by Vencorex is a mixture of 2, 4-toluene diisocyanate (80%) and 2, 6-toluene diisocyanate (20%). Major applications include polyurethane flexible foams (slabs/moldings), cast... view more

Polyether polyol. Used in the manufacture of coatings... view more

Polyether polyol. Used in the manufacture of coatings... view more

Polyether polyol. Used in the manufacture of coatings... view more

Polyether polyol. Used in the manufacture of coatings... view more

Polyether polyol. Used in the manufacture of coatings... view more

SETATHANE® D 1156 by allnex is a branched, castor oil-based polyol. It is used as a reactive diluent in combination with SETATHANE® D 1145, SETATHANE® D 1150 and SETATHANE® D 1160 in the formulation of... view more