SAFOL 23E3 Ethoxylate by Sasol is a 100% active, biodegradable, non-ionic surfactant and emulsifier. It is an ethoxylated C10-C16 alcohol. SAFOL 23E3 Ethoxylate is used in paints and coatings. It is... view more

SAFOL 23E4 Ethoxylate is a 100% active, biodegradable, non-ionic surfactant and emulsifier by Sasol. It is an ethoxylated C10-C16 alcohol. It is designed for paints and coatings. SAFOL 23E4... view more

SAFOL 23E5 Ethoxylate by Sasol is an ethoxylated C10-C16 alcohol. It is a 100% active, biodegradable, non-ionic surfactant and emulsifier. SAFOL 23E5 Ethoxylate is suitable for paints and coatings... view more

SAFOL 23E7 Ethoxylate is an ethoxylated C10-C16 alcohol by Sasol. It is a biodegradable, 100% active, non-ionic surfactant and emulsifier. It is used in paints and coatings. SAFOL 23E7 Ethoxylate is... view more

SAFOL 23E9 Ethoxylate by Sasol is an ethoxylated C10-C16 alcohol. It is a biodegradable, 100% active, non-ionic emulsifier. SAFOL 23E9 Ethoxylate is suitable for paints and coatings. It is listed... view more

Scandiflex DBM is a dibutyl maleate. Acts as a monomeric plasticizer. Used in emulsions, coagulations, plastisols and PVA inks... view more

Dibutyl phthalate. Acts as a monomeric plasticizer. Used in paints and varnishes... view more

Dicyclohexyl phthalate. Acts as a plasticizer. Used for lacquer and heat-seal coating... view more

Dioctyl phthalate. Acts as a monomeric plasticizer. Used in calendered, extruded, injected and flat films... view more

Butyl cyclohexyl phthalate. Acts as a monomeric plasticizer. Used in nitrocellulose and acrylic lacquers... view more

Modified phenol derivative and methyle ethyle ketoxime (Meko) in solvent mixture. Acts as a viscosity stabilizer with good wetting and dispersing properties for solvent based and water borne coating... view more

ANTIGEL® 6217 by Schwegmann is a mixture of surface active agents with antioxidant, free of oxime. It is a multifunctional additive with good wetting and dispersing properties for solvent borne and... view more

Antioxidant with additives in solvent mixture. Acts as a viscosity stabilizer with good wetting and dispersing properties especially for high-solid coating systems, free of ketoxime and aromates. Is... view more

Antioxidant with additives in solvent mixture. Acts as a viscosity stabilizer with good wetting and dispersing properties especially for high-solid coating systems, free of ketoxime and aromates. Is... view more

Silicone free, polymer in solvents mixture. Acts as a defoaming and deaerating agent. In most cases it also improves the leveling. Used in solvent based and water borne systems. In solvent based... view more

Aqueous emulsion of a carboxylated acrylic copolymer. Used as a thickener in high gloss emulsion paint formulations and in chemical resistant, high P.V.C. sheen and semi-gloss emulsion paints. Gives... view more

TEXICRYL® 13-319 by Scott Bader Company is a hydrophobically-modified alkali swellable (HASE) emulsion (30% solids content). Acts as a rheology modifier. The pure acrylic polymer is activated by... view more

Texigel® 23-005 is a high viscosity aqueous solution of ammonia-free sodium polyacrylate by Scott Bader. Used for modifying the viscosity of many latex-based coating formulations. Produces... view more

Highly efficient anionic inverse emulsion. Used as a thickener for aqueous based coatings. Provides a long stringy flow and efficiency over a wide pH range... view more

Anionic inverse emulsion thickener. Used for for thickening a wide variety of aqueous binder systems including PVA, EVA, SBR, PVdC, acrylic and styrene acrylic systems in a number of aqueous based... view more

RHEOPLUS® TA2010 by Sepiolsa is easy to disperse rheology modifier made from high-purity, finely micronized attapulgite clay. It provides the system with a thixotropic effect as well as anti-settling... view more

RHEOPLUS® TA2015 by Sepiolsa is easy to disperse rheology modifier made from high-purity, micronized attapulgite clay. It provides the system with a thixotropic effect as well as syneresis control and... view more

RHEOPLUS® TS3010A by Sepiolsa is easy to disperse rheology modifier made from high-purity, finely micronized sepiolite clay. It provides the system with a thixotropic effect, high viscosity, as well as... view more

1, 2-Diaminocyclohexane (DACH), di-amine by Seqens is epoxy curing agent. It offers enhanced film hardness to promote high chemical and physical resistance properties in subsequent coatings. It shows excellent resistance to... view more

2-Ethylhexyl Acetate (Chemoxy) by Seqens is clear, low volatile 2-ethylhexyl acetate. It is a non-HAP, non-SARA, partially biodegradable non-polar solvent. It exhibits low surface tension, high boiling point and low... view more

Coasol® by Seqens is a non-HAPS, low-odor, di-isobutyl glutarate and di-isobutyl based coalescent. It is recommended for water-based architectural paints. It is used in fusion of the polymer... view more

Coasol® 290 Plus by Seqens is a low odor, coalescing solvent. It exhibits high boiling point, improved open time and minimal water solubility that improve portioning performance. It offers improved... view more

Di-n-Butyl Ether by Seqens is di-n-butyl ether. It is recommended as a solvent for CD-R coating manufacture. It is a good solvent for oils, fats and natural & synthetic resins. It exhibits high flash... view more

Soft and non-abrasive water-washed kaolin. Used as a titanium dioxide extender/spacer in medium to high PVC water-based paints, primers and undercoats. Offers good hiding power, good suspensability... view more

Soft and non-abrasive water-washed kaolin. Used as a titanium dioxide extender/spacer in medium to high PVC water-based paints, primers and undercoats and in solvent-based paints. Offers good hiding... view more

Butylated melamine formaldehyde amino resin. Acts as a curing agent. Used in stoving & roller coatings and acid catalyzed wood finishes. Also used in man-proof varnishes... view more

Butylated urea formaldehyde amino resin. Acts as a curing agent and wetting agent. Used in paints and printing inks... view more

Polyamide reactive. Acts as a curing agent. It is a highly viscous liquid... view more

Polyamide reactive. Acts as a curing agent. It is a viscous liquid... view more

Dispersion of anti-skinning agent in a soya vehicle. Prevents oxidative inks from drying too fast in the can, in the ink ducts and on the ink rollers during idle press times. Used in inks... view more

AquaFLON® 178G by Shamrock is a stable aqueous dispersion of a blend of a synthetic wax andpolytetrafluoroethylene (PTFE). Acts as a slip control agent,and abrasion resistance agent. Provides slip... view more

AquaFLON® 50 by Shamrock is a polytetrafluoroethylene (PTFE) aqueous dispersion. Acts as a slip control agent. Provides high temperature resistance, broad chemical resistance, clarity, gloss... view more

AquaFLON® 52 by Shamrock is a non-ionic aqueous dispersion of polytetrafluoroethylene (PTFE). Acts as a slip control, rub- and abrasion resistance agent. Provides high temperature resistance, broad... view more

AquaFLON® 605 by Shamrock Technologies is a blend of spherical synthetic wax and polytetrafluoroethylene (PTFE) in a stable aqueous dispersion. Acts as a slip control agent and abrasion resistance agent. Provides... view more